ipq807x: renumber upstreamed patches

[openwrt/openwrt.git] / target / linux / ipq807x / patches-6.1 / 0005-v6.2-arm64-dts-qcom-ipq8074-add-thermal-nodes.patch

diff --git a/target/linux/ipq807x/patches-6.1/0005-v6.2-arm64-dts-qcom-ipq8074-add-thermal-nodes.patch b/target/linux/ipq807x/patches-6.1/0005-v6.2-arm64-dts-qcom-ipq8074-add-thermal-nodes.patch
new file mode 100644 (file)
index 0000000..bad75e4
--- /dev/null
+++ b/target/linux/ipq807x/patches-6.1/0005-v6.2-arm64-dts-qcom-ipq8074-add-thermal-nodes.patch
@@ -0,0 +1,130 @@
+From c3cc0c2a17f552be2426200e47a9e2c62cf449ce Mon Sep 17 00:00:00 2001
+From: Robert Marko <robimarko@gmail.com>
+Date: Fri, 19 Aug 2022 00:02:45 +0200
+Subject: [PATCH] arm64: dts: qcom: ipq8074: add thermal nodes
+
+IPQ8074 has a tsens v2.3.0 peripheral which monitors
+temperatures around the various subsystems on the
+die.
+
+So lets add the tsens and thermal zone nodes, passive
+CPU cooling will come in later patches after CPU frequency
+scaling is supported.
+
+Signed-off-by: Robert Marko <robimarko@gmail.com>
+Signed-off-by: Bjorn Andersson <andersson@kernel.org>
+Link: https://lore.kernel.org/r/20220818220245.338396-5-robimarko@gmail.com
+---
+ arch/arm64/boot/dts/qcom/ipq8074.dtsi | 96 +++++++++++++++++++++++++++
+ 1 file changed, 96 insertions(+)
+
+--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
++++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+@@ -274,6 +274,16 @@
+                       status = "disabled";
+               };
+ 
++              tsens: thermal-sensor@4a9000 {
++                      compatible = "qcom,ipq8074-tsens";
++                      reg = <0x4a9000 0x1000>, /* TM */
++                            <0x4a8000 0x1000>; /* SROT */
++                      interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
++                      interrupt-names = "combined";
++                      #qcom,sensors = <16>;
++                      #thermal-sensor-cells = <1>;
++              };
++
+               cryptobam: dma-controller@704000 {
+                       compatible = "qcom,bam-v1.7.0";
+                       reg = <0x00704000 0x20000>;
+@@ -874,4 +884,90 @@
+                            <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+                            <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+       };
++
++      thermal-zones {
++              nss-top-thermal {
++                      polling-delay-passive = <250>;
++                      polling-delay = <1000>;
++
++                      thermal-sensors = <&tsens 4>;
++              };
++
++              nss0-thermal {
++                      polling-delay-passive = <250>;
++                      polling-delay = <1000>;
++
++                      thermal-sensors = <&tsens 5>;
++              };
++
++              nss1-thermal {
++                      polling-delay-passive = <250>;
++                      polling-delay = <1000>;
++
++                      thermal-sensors = <&tsens 6>;
++              };
++
++              wcss-phya0-thermal {
++                      polling-delay-passive = <250>;
++                      polling-delay = <1000>;
++
++                      thermal-sensors = <&tsens 7>;
++              };
++
++              wcss-phya1-thermal {
++                      polling-delay-passive = <250>;
++                      polling-delay = <1000>;
++
++                      thermal-sensors = <&tsens 8>;
++              };
++
++              cpu0_thermal: cpu0-thermal {
++                      polling-delay-passive = <250>;
++                      polling-delay = <1000>;
++
++                      thermal-sensors = <&tsens 9>;
++              };
++
++              cpu1_thermal: cpu1-thermal {
++                      polling-delay-passive = <250>;
++                      polling-delay = <1000>;
++
++                      thermal-sensors = <&tsens 10>;
++              };
++
++              cpu2_thermal: cpu2-thermal {
++                      polling-delay-passive = <250>;
++                      polling-delay = <1000>;
++
++                      thermal-sensors = <&tsens 11>;
++              };
++
++              cpu3_thermal: cpu3-thermal {
++                      polling-delay-passive = <250>;
++                      polling-delay = <1000>;
++
++                      thermal-sensors = <&tsens 12>;
++              };
++
++              cluster_thermal: cluster-thermal {
++                      polling-delay-passive = <250>;
++                      polling-delay = <1000>;
++
++                      thermal-sensors = <&tsens 13>;
++              };
++
++              wcss-phyb0-thermal {
++                      polling-delay-passive = <250>;
++                      polling-delay = <1000>;
++
++                      thermal-sensors = <&tsens 14>;
++              };
++
++              wcss-phyb1-thermal {
++                      polling-delay-passive = <250>;
++                      polling-delay = <1000>;
++
++                      thermal-sensors = <&tsens 15>;
++              };
++      };
+ };