nuke most of the old ixp4xx patchsets

[openwrt/svn-archive/archive.git] / target / linux / ixp4xx / patches-2.6.24 / 020-ixp4xx_rtc_info.patch

diff --git a/target/linux/ixp4xx/patches-2.6.24/020-ixp4xx_rtc_info.patch b/target/linux/ixp4xx/patches-2.6.24/020-ixp4xx_rtc_info.patch
deleted file mode 100644 (file)
index 60a3c28..0000000
--- a/target/linux/ixp4xx/patches-2.6.24/020-ixp4xx_rtc_info.patch
+++ /dev/null
@@ -1,119 +0,0 @@
-From 88721db37ead2212a54c1392e2e65bae78d2604b Mon Sep 17 00:00:00 2001
-From: Rod Whitby <rod@whitby.id.au>
-Date: Tue, 29 Jan 2008 10:05:48 +1030
-Subject: ixp4xx: Register nslu2 rtc i2c_board_info (Patch #4772)
-
-Register the i2c board info related to the RTC chip on the nslu2 board
-to allow it to be found automatically on boot.
-
-Signed-off-by: Rod Whitby <rod@whitby.id.au>
-Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
-
-PATCH FOLLOWS
-KernelVersion: 2.6.24-git5
-
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/nslu2-setup.c
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/nslu2-setup.c
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/nslu2-setup.c
-@@ -18,6 +18,7 @@
- #include <linux/serial.h>
- #include <linux/serial_8250.h>
- #include <linux/leds.h>
-+#include <linux/i2c.h>
- #include <linux/i2c-gpio.h>
- 
- #include <asm/mach-types.h>
-@@ -47,6 +48,12 @@ static struct i2c_gpio_platform_data nsl
-       .scl_pin                = NSLU2_SCL_PIN,
- };
- 
-+static struct i2c_board_info __initdata nslu2_i2c_board_info [] = {
-+      {
-+              I2C_BOARD_INFO("rtc-x1205", 0x6f),
-+      },
-+};
-+
- #ifdef CONFIG_LEDS_IXP4XX
- static struct resource nslu2_led_resources[] = {
-       {
-@@ -183,6 +190,9 @@ static void __init nslu2_init(void)
- 
-       pm_power_off = nslu2_power_off;
- 
-+      i2c_register_board_info(0, nslu2_i2c_board_info,
-+                              ARRAY_SIZE(nslu2_i2c_board_info));
-+
-       /*
-        * This is only useful on a modified machine, but it is valuable
-        * to have it first in order to see debug messages, and so that
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/nas100d-setup.c
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/nas100d-setup.c
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/nas100d-setup.c
-@@ -16,6 +16,7 @@
- #include <linux/serial.h>
- #include <linux/serial_8250.h>
- #include <linux/leds.h>
-+#include <linux/i2c.h>
- #include <linux/i2c-gpio.h>
- 
- #include <asm/mach-types.h>
-@@ -39,6 +40,12 @@ static struct platform_device nas100d_fl
-       .resource               = &nas100d_flash_resource,
- };
- 
-+static struct i2c_board_info __initdata nas100d_i2c_board_info [] = {
-+      {
-+              I2C_BOARD_INFO("rtc-pcf8563", 0x51),
-+      },
-+};
-+
- #ifdef CONFIG_LEDS_IXP4XX
- static struct resource nas100d_led_resources[] = {
-       {
-@@ -157,6 +164,9 @@ static void __init nas100d_init(void)
- 
-       pm_power_off = nas100d_power_off;
- 
-+      i2c_register_board_info(0, nas100d_i2c_board_info,
-+                              ARRAY_SIZE(nas100d_i2c_board_info));
-+
-       /*
-        * This is only useful on a modified machine, but it is valuable
-        * to have it first in order to see debug messages, and so that
-Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/dsmg600-setup.c
-===================================================================
---- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/dsmg600-setup.c
-+++ linux-2.6.24.7/arch/arm/mach-ixp4xx/dsmg600-setup.c
-@@ -14,6 +14,7 @@
- #include <linux/kernel.h>
- #include <linux/serial.h>
- #include <linux/serial_8250.h>
-+#include <linux/i2c.h>
- #include <linux/i2c-gpio.h>
- 
- #include <asm/mach-types.h>
-@@ -51,6 +52,12 @@ static struct platform_device dsmg600_i2
-       },
- };
- 
-+static struct i2c_board_info __initdata dsmg600_i2c_board_info [] = {
-+      {
-+              I2C_BOARD_INFO("rtc-pcf8563", 0x51),
-+      },
-+};
-+
- #ifdef CONFIG_LEDS_CLASS
- static struct resource dsmg600_led_resources[] = {
-       {
-@@ -158,6 +165,9 @@ static void __init dsmg600_init(void)
- 
-       pm_power_off = dsmg600_power_off;
- 
-+      i2c_register_board_info(0, dsmg600_i2c_board_info,
-+                              ARRAY_SIZE(dsmg600_i2c_board_info));
-+
-       /* The UART is required on the DSM-G600 (Redboot cannot use the
-        * NIC) -- do it here so that it does *not* get removed if
-        * platform_add_devices fails!