ixp4xx: remove unmaintained target

[openwrt/openwrt.git] / target / linux / ixp4xx / patches-4.9 / 160-delayed_uart_io.patch

diff --git a/target/linux/ixp4xx/patches-4.9/160-delayed_uart_io.patch b/target/linux/ixp4xx/patches-4.9/160-delayed_uart_io.patch
deleted file mode 100644 (file)
index 95cc568..0000000
--- a/target/linux/ixp4xx/patches-4.9/160-delayed_uart_io.patch
+++ /dev/null
@@ -1,133 +0,0 @@
---- a/drivers/tty/serial/8250/8250_core.c
-+++ b/drivers/tty/serial/8250/8250_core.c
-@@ -833,6 +833,7 @@ static int serial8250_probe(struct platf
-               uart.port.get_mctrl     = p->get_mctrl;
-               uart.port.pm            = p->pm;
-               uart.port.dev           = &dev->dev;
-+              uart.port.rw_delay      = p->rw_delay;
-               uart.port.irqflags      |= irqflag;
-               ret = serial8250_register_8250_port(&uart);
-               if (ret < 0) {
-@@ -989,6 +990,7 @@ int serial8250_register_8250_port(struct
-               uart->bugs              = up->bugs;
-               uart->port.mapbase      = up->port.mapbase;
-               uart->port.mapsize      = up->port.mapsize;
-+              uart->port.rw_delay     = up->port.rw_delay;
-               uart->port.private_data = up->port.private_data;
-               uart->tx_loadsz         = up->tx_loadsz;
-               uart->capabilities      = up->capabilities;
---- a/drivers/tty/serial/serial_core.c
-+++ b/drivers/tty/serial/serial_core.c
-@@ -2259,6 +2259,7 @@ uart_report_port(struct uart_driver *drv
-               snprintf(address, sizeof(address),
-                        "I/O 0x%lx offset 0x%x", port->iobase, port->hub6);
-               break;
-+      case UPIO_MEM_DELAY:
-       case UPIO_MEM:
-       case UPIO_MEM16:
-       case UPIO_MEM32:
-@@ -2931,6 +2932,7 @@ int uart_match_port(struct uart_port *po
-       case UPIO_HUB6:
-               return (port1->iobase == port2->iobase) &&
-                      (port1->hub6   == port2->hub6);
-+      case UPIO_MEM_DELAY:
-       case UPIO_MEM:
-       case UPIO_MEM16:
-       case UPIO_MEM32:
---- a/include/linux/serial_8250.h
-+++ b/include/linux/serial_8250.h
-@@ -28,6 +28,7 @@ struct plat_serial8250_port {
-       void            *private_data;
-       unsigned char   regshift;       /* register shift */
-       unsigned char   iotype;         /* UPIO_* */
-+      unsigned int rw_delay;  /* udelay for slower busses IXP4XX Expansion Bus */
-       unsigned char   hub6;
-       upf_t           flags;          /* UPF_* flags */
-       unsigned int    type;           /* If UPF_FIXED_TYPE */
---- a/include/linux/serial_core.h
-+++ b/include/linux/serial_core.h
-@@ -152,6 +152,7 @@ struct uart_port {
- #define UPIO_TSI              (SERIAL_IO_TSI)         /* Tsi108/109 type IO */
- #define UPIO_MEM32BE          (SERIAL_IO_MEM32BE)     /* 32b big endian */
- #define UPIO_MEM16            (SERIAL_IO_MEM16)       /* 16b little endian */
-+#define UPIO_MEM_DELAY                (SERIAL_IO_MEM_DELAY)
- 
-       unsigned int            read_status_mask;       /* driver specific */
-       unsigned int            ignore_status_mask;     /* driver specific */
-@@ -234,6 +235,7 @@ struct uart_port {
-       int                     hw_stopped;             /* sw-assisted CTS flow state */
-       unsigned int            mctrl;                  /* current modem ctrl settings */
-       unsigned int            timeout;                /* character-based timeout */
-+      unsigned int            rw_delay;               /* udelay for slow busses, IXP4XX Expansion Bus */
-       unsigned int            type;                   /* port type */
-       const struct uart_ops   *ops;
-       unsigned int            custom_divisor;
---- a/drivers/tty/serial/8250/8250_port.c
-+++ b/drivers/tty/serial/8250/8250_port.c
-@@ -383,6 +383,20 @@ static unsigned int mem16_serial_in(stru
-       return readw(p->membase + offset);
- }
- 
-+static unsigned int memdelay_serial_in(struct uart_port *p, int offset)
-+{
-+      struct uart_8250_port *up = (struct uart_8250_port *)p;
-+      udelay(up->port.rw_delay);
-+      return mem_serial_in(p, offset);
-+}
-+
-+static void memdelay_serial_out(struct uart_port *p, int offset, int value)
-+{
-+      struct uart_8250_port *up = (struct uart_8250_port *)p;
-+      udelay(up->port.rw_delay);
-+      mem_serial_out(p, offset, value);
-+}
-+
- static void mem32_serial_out(struct uart_port *p, int offset, int value)
- {
-       offset = offset << p->regshift;
-@@ -455,6 +469,11 @@ static void set_io_from_upio(struct uart
-               p->serial_out = mem32be_serial_out;
-               break;
- 
-+      case UPIO_MEM_DELAY:
-+              p->serial_in = memdelay_serial_in;
-+              p->serial_out = memdelay_serial_out;
-+              break;
-+
- #ifdef CONFIG_SERIAL_8250_RT288X
-       case UPIO_AU:
-               p->serial_in = au_serial_in;
-@@ -482,6 +501,7 @@ serial_port_out_sync(struct uart_port *p
-       case UPIO_MEM16:
-       case UPIO_MEM32:
-       case UPIO_MEM32BE:
-+      case UPIO_MEM_DELAY:
-       case UPIO_AU:
-               p->serial_out(p, offset, value);
-               p->serial_in(p, UART_LCR);      /* safe, no side-effects */
-@@ -2759,6 +2779,7 @@ static int serial8250_request_std_resour
-       case UPIO_MEM32BE:
-       case UPIO_MEM16:
-       case UPIO_MEM:
-+      case UPIO_MEM_DELAY:
-               if (!port->mapbase)
-                       break;
- 
-@@ -2797,6 +2818,7 @@ static void serial8250_release_std_resou
-       case UPIO_MEM32BE:
-       case UPIO_MEM16:
-       case UPIO_MEM:
-+      case UPIO_MEM_DELAY:
-               if (!port->mapbase)
-                       break;
- 
---- a/include/uapi/linux/serial.h
-+++ b/include/uapi/linux/serial.h
-@@ -70,6 +70,7 @@ struct serial_struct {
- #define SERIAL_IO_TSI   5
- #define SERIAL_IO_MEM32BE 6
- #define SERIAL_IO_MEM16       7
-+#define SERIAL_IO_MEM_DELAY 10
- 
- #define UART_CLEAR_FIFO               0x01
- #define UART_USE_FIFO         0x02