ixp4xx: Update to 4.9 kernel, refresh patches. Remove kmod-spi-gpio-old usage.

[openwrt/staging/wigyori.git] / target / linux / ixp4xx / patches-4.9 / 160-delayed_uart_io.patch

diff --git a/target/linux/ixp4xx/patches-4.9/160-delayed_uart_io.patch b/target/linux/ixp4xx/patches-4.9/160-delayed_uart_io.patch
new file mode 100644 (file)
index 0000000..c64596a
--- /dev/null
+++ b/target/linux/ixp4xx/patches-4.9/160-delayed_uart_io.patch
@@ -0,0 +1,133 @@
+--- a/drivers/tty/serial/8250/8250_core.c
++++ b/drivers/tty/serial/8250/8250_core.c
+@@ -833,6 +833,7 @@ static int serial8250_probe(struct platf
+               uart.port.get_mctrl     = p->get_mctrl;
+               uart.port.pm            = p->pm;
+               uart.port.dev           = &dev->dev;
++              uart.port.rw_delay      = p->rw_delay;
+               uart.port.irqflags      |= irqflag;
+               ret = serial8250_register_8250_port(&uart);
+               if (ret < 0) {
+@@ -989,6 +990,7 @@ int serial8250_register_8250_port(struct
+               uart->bugs              = up->bugs;
+               uart->port.mapbase      = up->port.mapbase;
+               uart->port.mapsize      = up->port.mapsize;
++              uart->port.rw_delay     = up->port.rw_delay;
+               uart->port.private_data = up->port.private_data;
+               uart->tx_loadsz         = up->tx_loadsz;
+               uart->capabilities      = up->capabilities;
+--- a/drivers/tty/serial/serial_core.c
++++ b/drivers/tty/serial/serial_core.c
+@@ -2229,6 +2229,7 @@ uart_report_port(struct uart_driver *drv
+               snprintf(address, sizeof(address),
+                        "I/O 0x%lx offset 0x%x", port->iobase, port->hub6);
+               break;
++      case UPIO_MEM_DELAY:
+       case UPIO_MEM:
+       case UPIO_MEM16:
+       case UPIO_MEM32:
+@@ -2893,6 +2894,7 @@ int uart_match_port(struct uart_port *po
+       case UPIO_HUB6:
+               return (port1->iobase == port2->iobase) &&
+                      (port1->hub6   == port2->hub6);
++      case UPIO_MEM_DELAY:
+       case UPIO_MEM:
+       case UPIO_MEM16:
+       case UPIO_MEM32:
+--- a/include/linux/serial_8250.h
++++ b/include/linux/serial_8250.h
+@@ -28,6 +28,7 @@ struct plat_serial8250_port {
+       void            *private_data;
+       unsigned char   regshift;       /* register shift */
+       unsigned char   iotype;         /* UPIO_* */
++      unsigned int rw_delay;  /* udelay for slower busses IXP4XX Expansion Bus */
+       unsigned char   hub6;
+       upf_t           flags;          /* UPF_* flags */
+       unsigned int    type;           /* If UPF_FIXED_TYPE */
+--- a/include/linux/serial_core.h
++++ b/include/linux/serial_core.h
+@@ -152,6 +152,7 @@ struct uart_port {
+ #define UPIO_TSI              (SERIAL_IO_TSI)         /* Tsi108/109 type IO */
+ #define UPIO_MEM32BE          (SERIAL_IO_MEM32BE)     /* 32b big endian */
+ #define UPIO_MEM16            (SERIAL_IO_MEM16)       /* 16b little endian */
++#define UPIO_MEM_DELAY                (SERIAL_IO_MEM_DELAY)
+ 
+       unsigned int            read_status_mask;       /* driver specific */
+       unsigned int            ignore_status_mask;     /* driver specific */
+@@ -233,6 +234,7 @@ struct uart_port {
+       int                     hw_stopped;             /* sw-assisted CTS flow state */
+       unsigned int            mctrl;                  /* current modem ctrl settings */
+       unsigned int            timeout;                /* character-based timeout */
++      unsigned int            rw_delay;               /* udelay for slow busses, IXP4XX Expansion Bus */
+       unsigned int            type;                   /* port type */
+       const struct uart_ops   *ops;
+       unsigned int            custom_divisor;
+--- a/drivers/tty/serial/8250/8250_port.c
++++ b/drivers/tty/serial/8250/8250_port.c
+@@ -384,6 +384,20 @@ static unsigned int mem16_serial_in(stru
+       return readw(p->membase + offset);
+ }
+ 
++static unsigned int memdelay_serial_in(struct uart_port *p, int offset)
++{
++      struct uart_8250_port *up = (struct uart_8250_port *)p;
++      udelay(up->port.rw_delay);
++      return mem_serial_in(p, offset);
++}
++
++static void memdelay_serial_out(struct uart_port *p, int offset, int value)
++{
++      struct uart_8250_port *up = (struct uart_8250_port *)p;
++      udelay(up->port.rw_delay);
++      mem_serial_out(p, offset, value);
++}
++
+ static void mem32_serial_out(struct uart_port *p, int offset, int value)
+ {
+       offset = offset << p->regshift;
+@@ -456,6 +470,11 @@ static void set_io_from_upio(struct uart
+               p->serial_out = mem32be_serial_out;
+               break;
+ 
++      case UPIO_MEM_DELAY:
++              p->serial_in = memdelay_serial_in;
++              p->serial_out = memdelay_serial_out;
++              break;
++
+ #ifdef CONFIG_SERIAL_8250_RT288X
+       case UPIO_AU:
+               p->serial_in = au_serial_in;
+@@ -483,6 +502,7 @@ serial_port_out_sync(struct uart_port *p
+       case UPIO_MEM16:
+       case UPIO_MEM32:
+       case UPIO_MEM32BE:
++      case UPIO_MEM_DELAY:
+       case UPIO_AU:
+               p->serial_out(p, offset, value);
+               p->serial_in(p, UART_LCR);      /* safe, no side-effects */
+@@ -2756,6 +2776,7 @@ static int serial8250_request_std_resour
+       case UPIO_MEM32BE:
+       case UPIO_MEM16:
+       case UPIO_MEM:
++      case UPIO_MEM_DELAY:
+               if (!port->mapbase)
+                       break;
+ 
+@@ -2794,6 +2815,7 @@ static void serial8250_release_std_resou
+       case UPIO_MEM32BE:
+       case UPIO_MEM16:
+       case UPIO_MEM:
++      case UPIO_MEM_DELAY:
+               if (!port->mapbase)
+                       break;
+ 
+--- a/include/uapi/linux/serial.h
++++ b/include/uapi/linux/serial.h
+@@ -70,6 +70,7 @@ struct serial_struct {
+ #define SERIAL_IO_TSI   5
+ #define SERIAL_IO_MEM32BE 6
+ #define SERIAL_IO_MEM16       7
++#define SERIAL_IO_MEM_DELAY 10
+ 
+ #define UART_CLEAR_FIFO               0x01
+ #define UART_USE_FIFO         0x02