+++ /dev/null
-From 805680514f84197ed20c419cd106cda9fb0beaa2 Mon Sep 17 00:00:00 2001
-From: Frank Sae <Frank.Sae@motor-comm.com>
-Date: Thu, 2 Feb 2023 11:00:33 +0800
-Subject: [PATCH 058/129] dt-bindings: net: Add Motorcomm yt8xxx ethernet phy
-
-Add a YAML binding document for the Motorcomm yt8xxx Ethernet phy.
-
-Signed-off-by: Frank Sae <Frank.Sae@motor-comm.com>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- .../bindings/net/motorcomm,yt8xxx.yaml | 117 ++++++++++++++++++
- .../devicetree/bindings/vendor-prefixes.yaml | 2 +
- MAINTAINERS | 1 +
- 3 files changed, 120 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml
-
-diff --git a/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml b/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml
-new file mode 100644
-index 000000000..157e3bbca
---- /dev/null
-+++ b/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml
-@@ -0,0 +1,117 @@
-+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/net/motorcomm,yt8xxx.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: MotorComm yt8xxx Ethernet PHY
-+
-+maintainers:
-+ - Frank Sae <frank.sae@motor-comm.com>
-+
-+allOf:
-+ - $ref: ethernet-phy.yaml#
-+
-+properties:
-+ compatible:
-+ enum:
-+ - ethernet-phy-id4f51.e91a
-+ - ethernet-phy-id4f51.e91b
-+
-+ rx-internal-delay-ps:
-+ description: |
-+ RGMII RX Clock Delay used only when PHY operates in RGMII mode with
-+ internal delay (phy-mode is 'rgmii-id' or 'rgmii-rxid') in pico-seconds.
-+ enum: [ 0, 150, 300, 450, 600, 750, 900, 1050, 1200, 1350, 1500, 1650,
-+ 1800, 1900, 1950, 2050, 2100, 2200, 2250, 2350, 2500, 2650, 2800,
-+ 2950, 3100, 3250, 3400, 3550, 3700, 3850, 4000, 4150 ]
-+ default: 1950
-+
-+ tx-internal-delay-ps:
-+ description: |
-+ RGMII TX Clock Delay used only when PHY operates in RGMII mode with
-+ internal delay (phy-mode is 'rgmii-id' or 'rgmii-txid') in pico-seconds.
-+ enum: [ 0, 150, 300, 450, 600, 750, 900, 1050, 1200, 1350, 1500, 1650, 1800,
-+ 1950, 2100, 2250 ]
-+ default: 1950
-+
-+ motorcomm,clk-out-frequency-hz:
-+ description: clock output on clock output pin.
-+ enum: [0, 25000000, 125000000]
-+ default: 0
-+
-+ motorcomm,keep-pll-enabled:
-+ description: |
-+ If set, keep the PLL enabled even if there is no link. Useful if you
-+ want to use the clock output without an ethernet link.
-+ type: boolean
-+
-+ motorcomm,auto-sleep-disabled:
-+ description: |
-+ If set, PHY will not enter sleep mode and close AFE after unplug cable
-+ for a timer.
-+ type: boolean
-+
-+ motorcomm,tx-clk-adj-enabled:
-+ description: |
-+ This configuration is mainly to adapt to VF2 with JH7110 SoC.
-+ Useful if you want to use tx-clk-xxxx-inverted to adj the delay of tx clk.
-+ type: boolean
-+
-+ motorcomm,tx-clk-10-inverted:
-+ description: |
-+ Use original or inverted RGMII Transmit PHY Clock to drive the RGMII
-+ Transmit PHY Clock delay train configuration when speed is 10Mbps.
-+ type: boolean
-+
-+ motorcomm,tx-clk-100-inverted:
-+ description: |
-+ Use original or inverted RGMII Transmit PHY Clock to drive the RGMII
-+ Transmit PHY Clock delay train configuration when speed is 100Mbps.
-+ type: boolean
-+
-+ motorcomm,tx-clk-1000-inverted:
-+ description: |
-+ Use original or inverted RGMII Transmit PHY Clock to drive the RGMII
-+ Transmit PHY Clock delay train configuration when speed is 1000Mbps.
-+ type: boolean
-+
-+unevaluatedProperties: false
-+
-+examples:
-+ - |
-+ mdio {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ phy-mode = "rgmii-id";
-+ ethernet-phy@4 {
-+ /* Only needed to make DT lint tools work. Do not copy/paste
-+ * into real DTS files.
-+ */
-+ compatible = "ethernet-phy-id4f51.e91a";
-+
-+ reg = <4>;
-+ rx-internal-delay-ps = <2100>;
-+ tx-internal-delay-ps = <150>;
-+ motorcomm,clk-out-frequency-hz = <0>;
-+ motorcomm,keep-pll-enabled;
-+ motorcomm,auto-sleep-disabled;
-+ };
-+ };
-+ - |
-+ mdio {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ phy-mode = "rgmii";
-+ ethernet-phy@5 {
-+ /* Only needed to make DT lint tools work. Do not copy/paste
-+ * into real DTS files.
-+ */
-+ compatible = "ethernet-phy-id4f51.e91a";
-+
-+ reg = <5>;
-+ motorcomm,clk-out-frequency-hz = <125000000>;
-+ motorcomm,keep-pll-enabled;
-+ motorcomm,auto-sleep-disabled;
-+ };
-+ };
-diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
-index 6e323a380..2e730c250 100644
---- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
-+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
-@@ -831,6 +831,8 @@ patternProperties:
- description: Moortec Semiconductor Ltd.
- "^mosaixtech,.*":
- description: Mosaix Technologies, Inc.
-+ "^motorcomm,.*":
-+ description: MotorComm, Inc.
- "^motorola,.*":
- description: Motorola, Inc.
- "^moxa,.*":
-diff --git a/MAINTAINERS b/MAINTAINERS
-index 169b59a2f..b13b0bce2 100644
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -13954,6 +13954,7 @@ M: Peter Geis <pgwipeout@gmail.com>
- M: Frank <Frank.Sae@motor-comm.com>
- L: netdev@vger.kernel.org
- S: Maintained
-+F: Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml
- F: drivers/net/phy/motorcomm.c
-
- MOXA SMARTIO/INDUSTIO/INTELLIO SERIAL CARD
---
-2.25.1
-
projects / openwrt / staging / wigyori.git / blobdiff