+++ /dev/null
-From a4ed1be805574a579c7965ae33c4982f6053263a Mon Sep 17 00:00:00 2001
-From: Samin Guo <samin.guo@starfivetech.com>
-Date: Tue, 25 Apr 2023 18:51:15 +0800
-Subject: [PATCH 072/129] dt-bindings: net: motorcomm: Add pad driver strength
- cfg
-
-The motorcomm phy (YT8531) supports the ability to adjust the drive
-strength of the rx_clk/rx_data, the value range of pad driver
-strength is 0 to 7.
-
-Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
----
- .../devicetree/bindings/net/motorcomm,yt8xxx.yaml | 12 ++++++++++++
- 1 file changed, 12 insertions(+)
-
-diff --git a/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml b/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml
-index e648e486b..cc26f3104 100644
---- a/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml
-+++ b/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml
-@@ -62,6 +62,18 @@ properties:
- for a timer.
- type: boolean
-
-+ motorcomm,rx-clk-driver-strength:
-+ description: drive strength of rx_clk pad.
-+ $ref: /schemas/types.yaml#/definitions/uint32
-+ enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ]
-+ default: 3
-+
-+ motorcomm,rx-data-driver-strength:
-+ description: drive strength of rx_data/rx_ctl rgmii pad.
-+ $ref: /schemas/types.yaml#/definitions/uint32
-+ enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ]
-+ default: 3
-+
- motorcomm,tx-clk-adj-enabled:
- description: |
- This configuration is mainly to adapt to VF2 with JH7110 SoC.
---
-2.25.1
-