jh71x0: refresh patches and configs once again

[openwrt/staging/wigyori.git] / target / linux / jh71x0 / patches-6.1 / 0111-Add-readme.patch

diff --git a/target/linux/jh71x0/patches-6.1/0111-Add-readme.patch b/target/linux/jh71x0/patches-6.1/0111-Add-readme.patch
deleted file mode 100644 (file)
index cbc55da..0000000
--- a/target/linux/jh71x0/patches-6.1/0111-Add-readme.patch
+++ /dev/null
@@ -1,81 +0,0 @@
-From c7a2424db68b1a8901eb84d16763dee628f91fde Mon Sep 17 00:00:00 2001
-From: Hal Feng <87058983+hal-feng@users.noreply.github.com>
-Date: Tue, 20 Dec 2022 16:18:35 +0800
-Subject: [PATCH 111/129] Add readme
-
----
- README.md | 62 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 62 insertions(+)
- create mode 100644 README.md
-
-diff --git a/README.md b/README.md
-new file mode 100644
-index 000000000..75060cf81
---- /dev/null
-+++ b/README.md
-@@ -0,0 +1,62 @@
-+## JH7110 Upstream Status ##
-+
-+To get the latest status of each upstreaming patch series, please visit
-+our RVspace.
-+
-+https://rvspace.org/en/project/JH7110_Upstream_Plan
-+
-+## Build Instructions ##
-+
-+1. Configure Kconfig options
-+
-+```shell
-+# Use default selections
-+make ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- defconfig
-+```
-+
-+or
-+
-+```shell
-+# Select options manually
-+make ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- nconfig
-+```
-+
-+To boot up the VisionFive 2 board, please make sure **SOC_STARFIVE**, 
-+**CLK_STARFIVE_JH7110_SYS**, **PINCTRL_STARFIVE_JH7110_SYS**, 
-+**SERIAL_8250_DW** are selected.
-+> If you need MMC and GMAC drivers, you should also select
-+**MMC_DW_STARFIVE** and **DWMAC_STARFIVE**.
-+
-+2. Build
-+```shell
-+make ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu-
-+```
-+
-+## How to Run on VisionFive 2 Board via Network ##
-+
-+1. Power on, enter u-boot and set enviroment parameters
-+```
-+setenv fdt_high 0xffffffffffffffff; setenv initrd_high 0xffffffffffffffff;
-+setenv scriptaddr 0x88100000; setenv script_offset_f 0x1fff000; setenv script_size_f 0x1000;
-+setenv kernel_addr_r 0x84000000; setenv kernel_comp_addr_r 0x90000000; setenv kernel_comp_size 0x10000000;
-+setenv fdt_addr_r 0x88000000; setenv ramdisk_addr_r 0x88300000;
-+```
-+2. Set IP addresses for the board and your tftp server
-+```
-+setenv serverip 192.168.w.x; setenv gatewayip 192.168.w.y; setenv ipaddr 192.168.w.z; setenv hostname starfive; setenv netdev eth0;
-+```
-+3. Upload dtb, image and file system to DDR from your tftp server
-+```
-+tftpboot ${fdt_addr_r} jh7110-starfive-visionfive-2-v1.3b.dtb; tftpboot ${kernel_addr_r} Image.gz; tftpboot ${ramdisk_addr_r} initramfs.cpio.gz;
-+```
-+> If your VisionFive 2 is v1.2A, you should upload jh7110-starfive-visionfive-2-v1.2a.dtb instead.
-+4. Load and boot the kernel
-+```
-+booti ${kernel_addr_r} ${ramdisk_addr_r}:${filesize} ${fdt_addr_r};
-+```
-+When you see the message "buildroot login:", the launch was successful.
-+You can just input the following accout and password, then continue.
-+```
-+buildroot login: root
-+Password: starfive
-+```
--- 
-2.25.1
-