jh71x0: update patches and config

[openwrt/staging/wigyori.git] / target / linux / jh71x0 / patches-6.1 / 0111-Add-readme.patch

diff --git a/target/linux/jh71x0/patches-6.1/0111-Add-readme.patch b/target/linux/jh71x0/patches-6.1/0111-Add-readme.patch
new file mode 100644 (file)
index 0000000..cbc55da
--- /dev/null
+++ b/target/linux/jh71x0/patches-6.1/0111-Add-readme.patch
@@ -0,0 +1,81 @@
+From c7a2424db68b1a8901eb84d16763dee628f91fde Mon Sep 17 00:00:00 2001
+From: Hal Feng <87058983+hal-feng@users.noreply.github.com>
+Date: Tue, 20 Dec 2022 16:18:35 +0800
+Subject: [PATCH 111/129] Add readme
+
+---
+ README.md | 62 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 62 insertions(+)
+ create mode 100644 README.md
+
+diff --git a/README.md b/README.md
+new file mode 100644
+index 000000000..75060cf81
+--- /dev/null
++++ b/README.md
+@@ -0,0 +1,62 @@
++## JH7110 Upstream Status ##
++
++To get the latest status of each upstreaming patch series, please visit
++our RVspace.
++
++https://rvspace.org/en/project/JH7110_Upstream_Plan
++
++## Build Instructions ##
++
++1. Configure Kconfig options
++
++```shell
++# Use default selections
++make ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- defconfig
++```
++
++or
++
++```shell
++# Select options manually
++make ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- nconfig
++```
++
++To boot up the VisionFive 2 board, please make sure **SOC_STARFIVE**, 
++**CLK_STARFIVE_JH7110_SYS**, **PINCTRL_STARFIVE_JH7110_SYS**, 
++**SERIAL_8250_DW** are selected.
++> If you need MMC and GMAC drivers, you should also select
++**MMC_DW_STARFIVE** and **DWMAC_STARFIVE**.
++
++2. Build
++```shell
++make ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu-
++```
++
++## How to Run on VisionFive 2 Board via Network ##
++
++1. Power on, enter u-boot and set enviroment parameters
++```
++setenv fdt_high 0xffffffffffffffff; setenv initrd_high 0xffffffffffffffff;
++setenv scriptaddr 0x88100000; setenv script_offset_f 0x1fff000; setenv script_size_f 0x1000;
++setenv kernel_addr_r 0x84000000; setenv kernel_comp_addr_r 0x90000000; setenv kernel_comp_size 0x10000000;
++setenv fdt_addr_r 0x88000000; setenv ramdisk_addr_r 0x88300000;
++```
++2. Set IP addresses for the board and your tftp server
++```
++setenv serverip 192.168.w.x; setenv gatewayip 192.168.w.y; setenv ipaddr 192.168.w.z; setenv hostname starfive; setenv netdev eth0;
++```
++3. Upload dtb, image and file system to DDR from your tftp server
++```
++tftpboot ${fdt_addr_r} jh7110-starfive-visionfive-2-v1.3b.dtb; tftpboot ${kernel_addr_r} Image.gz; tftpboot ${ramdisk_addr_r} initramfs.cpio.gz;
++```
++> If your VisionFive 2 is v1.2A, you should upload jh7110-starfive-visionfive-2-v1.2a.dtb instead.
++4. Load and boot the kernel
++```
++booti ${kernel_addr_r} ${ramdisk_addr_r}:${filesize} ${fdt_addr_r};
++```
++When you see the message "buildroot login:", the launch was successful.
++You can just input the following accout and password, then continue.
++```
++buildroot login: root
++Password: starfive
++```
+-- 
+2.25.1
+