kirkwood: split files into 6.1 and 6.6 version

[openwrt/openwrt.git] / target / linux / kirkwood / files / arch / arm / boot / dts / kirkwood-ea3500.dts

diff --git a/target/linux/kirkwood/files/arch/arm/boot/dts/kirkwood-ea3500.dts b/target/linux/kirkwood/files/arch/arm/boot/dts/kirkwood-ea3500.dts
deleted file mode 100644 (file)
index e9f9e30..0000000
--- a/target/linux/kirkwood/files/arch/arm/boot/dts/kirkwood-ea3500.dts
+++ /dev/null
@@ -1,243 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * kirkwood-linksys-audi.dts - Device Tree file for Linksys EA3500
- *
- * (c) 2013 Jonas Gorski <jogo@openwrt.org>
- * (c) 2013 Deutsche Telekom Innovation Laboratories
- * (c) 2014 Luka Perkov <luka@openwrt.org>
- * (c) 2014 Dan Walters <dan@walters.io>
- *
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6282.dtsi"
-
-/ {
-       model = "Linksys EA3500 (Audi)";
-       compatible = "linksys,ea3500", "linksys,audi", "marvell,kirkwood-88f6282", "marvell,kirkwood";
-
-       memory@0 {
-               device_type = "memory";
-               reg = <0x00000000 0x4000000>;
-       };
-
-       aliases {
-               led-boot = &led_power;
-               led-failsafe = &led_power;
-               led-running = &led_power;
-               led-upgrade = &led_power;
-               serial0 = &uart0;
-       };
-
-       chosen {
-               stdout-path = "serial0:115200n8";
-       };
-
-       gpio-keys {
-               compatible = "gpio-keys";
-
-               pinctrl-0 = <&pmx_btn_wps &pmx_btn_reset>;
-               pinctrl-names = "default";
-
-               wps {
-                       label = "WPS Button";
-                       linux,code = <KEY_WPS_BUTTON>;
-                       gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-               };
-
-               reset {
-                       label = "Reset Button";
-                       linux,code = <KEY_RESTART>;
-                       gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-               };
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-
-               pinctrl-0 = <&pmx_led_green_power>;
-               pinctrl-names = "default";
-
-               led_power: power {
-                       label = "audi:green:power";
-                       gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
-                       default-state = "on";
-               };
-       };
-};
-
-&pinctrl {
-       pmx_led_green_power: pmx-led-green-power {
-               marvell,pins = "mpp7";
-               marvell,function = "gpo";
-       };
-
-       pmx_btn_wps: pmx-btn-wps {
-               marvell,pins = "mpp47";
-               marvell,function = "gpio";
-       };
-
-       pmx_btn_reset: pmx-btn-reset {
-               marvell,pins = "mpp48";
-               marvell,function = "gpio";
-       };
-};
-
-&mdio {
-       status = "okay";
-
-       switch@10 {
-               compatible = "marvell,mv88e6085";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               reg = <16>;
-
-               ports {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-
-                       port@0 {
-                               reg = <0>;
-                               label = "ethernet1";
-                       };
-
-                       port@1 {
-                               reg = <1>;
-                               label = "ethernet2";
-                       };
-
-                       port@2 {
-                               reg = <2>;
-                               label = "ethernet3";
-                       };
-
-                       port@3 {
-                               reg = <3>;
-                               label = "ethernet4";
-                       };
-
-                       port@4 {
-                               reg = <4>;
-                               label = "internet";
-                       };
-
-                       port@5 {
-                               reg = <5>;
-                               phy-mode = "rgmii-id";
-                               ethernet = <&eth0port>;
-                               fixed-link {
-                                       speed = <1000>;
-                                       full-duplex;
-                               };
-                       };
-               };
-       };
-};
-
-&nand {
-       status = "okay";
-
-       pinctrl-0 = <&pmx_nand>;
-       pinctrl-names = "default";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partition@0 {
-                       label = "u-boot";
-                       reg = <0x0 0x80000>;
-                       read-only;
-               };
-
-               partition@80000 {
-                       label = "u_env";
-                       reg = <0x80000 0x4000>;
-               };
-
-               partition@84000 {
-                       label = "s_env";
-                       reg = <0x84000 0x4000>;
-               };
-
-               partition@200000 {
-                       label = "kernel1";
-                       reg = <0x200000 0x1400000>;
-               };
-
-               partition@600000 {
-                       label = "rootfs1";
-                       reg = <0x600000 0x1000000>;
-               };
-
-               partition@1600000 {
-                       label = "kernel2";
-                       reg = <0x1600000 0x1400000>;
-               };
-
-               partition@1a00000 {
-                       label = "rootfs2";
-                       reg = <0x1a00000 0x1000000>;
-               };
-
-               partition@2a00000 {
-                       label = "syscfg";
-                       reg = <0x2a00000  0x1600000>;
-               };
-
-               partition@88000 {
-                       label = "unused";
-                       reg = <0x88000 0x178000>;
-               };
-       };
-};
-
-&pciec {
-       status = "okay";
-};
-
-&pcie0 {
-       status = "okay";
-};
-
-&pcie1 {
-       status = "okay";
-};
-
-&mdio {
-       status = "okay";
-};
-
-&uart0 {
-       status = "okay";
-};
-
-/* eth0 is connected to a Marvell 88E6171 switch, without a PHY. So set
- * fixed speed and duplex.
- */
-&eth0 {
-       status = "okay";
-
-       ethernet0-port@0 {
-               speed = <1000>;
-               duplex = <1>;
-               phy-mode = "rgmii";
-       };
-};
-
-/* eth1 is connected to the switch at port 6. However DSA only supports a
- * single CPU port. This port is disabled to avoid confusion.
- */
-&eth1 {
-       status = "disabled";
-};
-
-/* There is no battery on the board, so the RTC does not keep
- * time when there is no power, making it useless.
- */
-&rtc {
-       status = "disabled";
-};