+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include <dt-bindings/leds/common.h>
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
- model = "ipTIME NAS1";
- compatible = "iptime,nas1", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
- aliases {
- serial0 = &uart0;
- led-boot = &led_ready;
- led-failsafe = &led_ready;
- led-running = &led_ready;
- led-upgrade = &led_ready;
- };
-
- chosen {
- /*
- * "root" argument from the stock bootloader should be ignored
- * as it'll prevent the kernel from finding the correct rootfs.
- */
- bootargs-append = " console=ttyS0,115200 root=";
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x00000000 0x10000000>;
- };
-
- gpio-leds {
- compatible = "gpio-leds";
-
- pinctrl-0 = <&pmx_led>;
- pinctrl-names = "default";
-
- hdd {
- label = "blue:hdd";
- gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "ata1";
- };
-
- usb {
- function = LED_FUNCTION_USB;
- color = <LED_COLOR_ID_BLUE>;
- gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
- trigger-sources = <&ehci_port1>;
- linux,default-trigger = "usbport";
- };
-
- led_ready: ready {
- label = "blue:ready";
- gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- pinctrl-0 = <&pmx_button>;
- pinctrl-names = "default";
-
- reset-copy {
- label = "Reset/Copy Button";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
- };
-
- power {
- label = "Power Button";
- linux,code = <KEY_POWER>;
- gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
- };
- };
-
- gpio-fan {
- compatible = "gpio-fan";
-
- pinctrl-0 = <&pmx_fan>;
- pinctrl-names = "default";
- gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>,
- <&gpio1 10 GPIO_ACTIVE_HIGH>;
- /* We don't know the exact rpm, just use dummy values here. */
- gpio-fan,speed-map = <0 0>, <1 1>, <2 2>;
- #cooling-cells = <2>;
- };
-
- gpio-poweroff {
- compatible = "gpio-poweroff";
- gpios = <&pca9536 0 GPIO_ACTIVE_LOW>;
- };
-
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- pinctrl-0 = <&pmx_usb_vbus>;
- pinctrl-names = "default";
-
- regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "USB Power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- regulator-always-on;
- gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&pinctrl {
- pmx_led: pmx-led {
- marvell,pins = "mpp35", "mpp45", "mpp46";
- marvell,function = "gpio";
- };
-
- pmx_fan: pmx-fan {
- marvell,pins = "mpp41", "mpp42";
- marvell,function = "gpio";
- };
-
- pmx_usb_vbus: pmx-usb-vbus {
- marvell,pins = "mpp43";
- marvell,function = "gpio";
- };
-
- pmx_button: pmx-button {
- marvell,pins = "mpp44", "mpp48";
- marvell,function = "gpio";
- };
-};
-
-&spi0 {
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <20000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x40000>;
- read-only;
- };
-
- partition@40000 {
- compatible = "openwrt,uimage", "denx,uimage";
- openwrt,offset = <0x400>;
- label = "firmware";
- reg = <0x40000 0xf80000>;
- };
-
- partition@fc0000 {
- label = "config";
- reg = <0xfc0000 0x40000>;
- read-only;
- };
- };
- };
-};
-
-&rtc {
- status = "disabled";
-};
-
-&i2c0 {
- status = "okay";
-
- pca9536: gpio@41 {
- compatible = "nxp,pca9536";
- reg = <0x41>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-};
-
-&uart0 {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- ehci_port1: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-};
-
-&mdio {
- status = "okay";
-
- ethphyb: ethernet-phy@b {
- reg = <0x0b>;
- };
-};
-
-ð1 {
- status = "okay";
-};
-
-ð1port {
- phy-handle = <ðphyb>;
- phy-connection-type = "rgmii-id";
-};
-
-&sata {
- status = "okay";
-
- #address-cells = <1>;
- #size-cells = <0>;
- nr-ports = <1>;
-
- sata-port@0 {
- reg = <0>;
- #thermal-sensor-cells = <0>;
- };
-};