kirkwood: split files into 6.1 and 6.6 version

[openwrt/openwrt.git] / target / linux / kirkwood / files-6.1 / arch / arm / boot / dts / kirkwood-ix4-200d.dts

diff --git a/target/linux/kirkwood/files-6.1/arch/arm/boot/dts/kirkwood-ix4-200d.dts b/target/linux/kirkwood/files-6.1/arch/arm/boot/dts/kirkwood-ix4-200d.dts
new file mode 100644 (file)
index 0000000..6220fbf
--- /dev/null
+++ b/target/linux/kirkwood/files-6.1/arch/arm/boot/dts/kirkwood-ix4-200d.dts
@@ -0,0 +1,199 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+       model = "Iomega ix4-200d";
+       compatible = "iom,ix4-200d", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+       aliases {
+               led-boot = &led_status_white;
+               led-failsafe = &led_status_red;
+               led-running = &led_power_white;
+               led-upgrade = &led_status_red;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,115200n8 earlyprintk";
+               stdout-path = &uart0;
+       };
+
+       memory {
+               device_type = "memory";
+               reg = <0x00000000 0x20000000>;
+       };
+
+       ocp@f1000000 {
+               i2c@11000 {
+                       status = "okay";
+
+                       adt7473@2e {
+                               compatible = "adi,adt7473";
+                               reg = <0x2e>;
+                       };
+               };
+
+               pinctrl: pin-controller@10000 {
+                       pmx_spi: pmx-spi {
+                               marvell,pins = "mpp12", "mpp13", "mpp14";
+                               marvell,function = "gpio";
+                       };
+
+                       pmx_keys: pmx-keys {
+                               marvell,pins = "mpp16", "mpp29", "mpp47", "mpp49";
+                               marvell,function = "gpio";
+                       };
+               };
+
+               sata@80000 {
+                       status = "okay";
+                       nr-ports = <2>;
+               };
+
+               serial@12000 {
+                       status = "okay";
+               };
+
+               spi3 {
+                       compatible = "spi-gpio";
+                       #address-cells = <0x1>;
+                       ranges;
+                       status = "okay";
+                       sck-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+                       mosi-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+                       cs-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+                       num-chipselects = <1>;
+                       #size-cells = <0>;
+
+                       gpio_spi: gpio_spi@0 {
+                               compatible = "fairchild,74hc595";
+                               reg = <0>;
+                               gpio-controller;
+                               #gpio-cells = <2>;
+                               registers-number = <1>;
+                               spi-max-frequency = <100000>;
+                       };
+               };
+
+               gpio-keys {
+                       compatible = "gpio-keys";
+                       pinctrl-0 = <&pmx_keys>;
+                       pinctrl-names = "default";
+
+                       button-0 {
+                               label = "Next Button";
+                               linux,code = <BTN_0>;
+                               gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+                       };
+
+                       button-1 {
+                               label = "Reset Button";
+                               linux,code = <KEY_RESTART>;
+                               gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+                       };
+
+                       button-2 {
+                               label = "Cancel Button";
+                               linux,code = <BTN_1>;
+                               gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+                       };
+
+                       button-3 {
+                               label = "Power Button";
+                               linux,code = <KEY_POWER2>;
+                               gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+                       };
+               };
+
+               gpio-leds {
+                       compatible = "gpio-leds";
+
+                       led_status_white: led-0 {
+                               function = LED_FUNCTION_STATUS;
+                               color = <LED_COLOR_ID_WHITE>;
+                               gpios = <&gpio_spi 4 GPIO_ACTIVE_LOW>;
+                       };
+
+                       led_status_red: led-1 {
+                               function = LED_FUNCTION_STATUS;
+                               color = <LED_COLOR_ID_RED>;
+                               gpios = <&gpio_spi 5 GPIO_ACTIVE_LOW>;
+                       };
+
+                       led_power_white: led-2 {
+                               function = LED_FUNCTION_POWER;
+                               color = <LED_COLOR_ID_WHITE>;
+                               gpios = <&gpio_spi 7 GPIO_ACTIVE_HIGH>;
+                       };
+               };
+       };
+};
+
+&eth0 {
+       status = "okay";
+       ethernet0-port@0 {
+               phy-handle = <&ethphy0>;
+       };
+};
+
+&eth1 {
+       status = "okay";
+       ethernet1-port@0 {
+               phy-handle = <&ethphy1>;
+       };
+};
+
+&mdio {
+       status = "okay";
+
+       ethphy0: ethernet-phy@8 {
+               reg = <8>;
+       };
+
+       ethphy1: ethernet-phy@9 {
+               reg = <9>;
+       };
+};
+
+&nand {
+       status = "okay";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partition@0 {
+                       label = "u-boot";
+                       reg = <0x0000000 0x100000>;
+                       read-only;
+               };
+
+               partition@a0000 {
+                       label = "u-boot environment";
+                       reg = <0xa0000 0x20000>;
+                       read-only;
+               };
+
+               partition@100000 {
+                       label = "kernel";
+                       reg = <0x100000 0x400000>;
+               };
+
+               partition@500000 {
+                       label = "ubi";
+                       reg = <0x500000 0x1B00000>;
+               };
+       };
+};
+
+&pciec {
+       status = "okay";
+};
+
+&pcie0 {
+       status = "okay";
+};