kirkwood: split files into 6.1 and 6.6 version

[openwrt/openwrt.git] / target / linux / kirkwood / files-6.6 / arch / arm / boot / dts / marvell / kirkwood-goflexhome.dts

diff --git a/target/linux/kirkwood/files-6.6/arch/arm/boot/dts/marvell/kirkwood-goflexhome.dts b/target/linux/kirkwood/files-6.6/arch/arm/boot/dts/marvell/kirkwood-goflexhome.dts
new file mode 100644 (file)
index 0000000..b0b69b4
--- /dev/null
+++ b/target/linux/kirkwood/files-6.6/arch/arm/boot/dts/marvell/kirkwood-goflexhome.dts
@@ -0,0 +1,135 @@
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+       model = "Seagate GoFlex Home";
+       compatible = "seagate,goflexhome", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+       aliases {
+               led-boot = &led_health;
+               led-failsafe = &led_fault;
+               led-running = &led_health;
+               led-upgrade = &led_fault;
+       };
+
+       memory@0 {
+               device_type = "memory";
+               reg = <0x00000000 0x8000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
+               stdout-path = &uart0;
+       };
+
+       ocp@f1000000 {
+               pinctrl: pin-controller@10000 {
+                       pmx_usb_power_enable: pmx-usb-power-enable {
+                               marvell,pins = "mpp29";
+                               marvell,function = "gpio";
+                       };
+
+                       pmx_led_white: pmx-led-white {
+                               marvell,pins = "mpp40";
+                               marvell,function = "gpio";
+                       };
+
+                       pmx_led_green: pmx-led_green {
+                               marvell,pins = "mpp46";
+                               marvell,function = "gpio";
+                       };
+
+                       pmx_led_orange: pmx-led-orange {
+                               marvell,pins = "mpp47";
+                               marvell,function = "gpio";
+                       };
+               };
+
+               serial@12000 {
+                       status = "okay";
+               };
+
+               sata@80000 {
+                       status = "okay";
+                       nr-ports = <2>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               led_health: health {
+                       label = "status:green:health";
+                       gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+                       default-state = "on";
+               };
+
+               led_fault: fault {
+                       label = "status:orange:fault";
+                       gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+               };
+
+               misc {
+                       label = "status:white:misc";
+                       gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "disk-activity";
+               };
+       };
+
+       regulators {
+               compatible = "simple-bus";
+
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               pinctrl-0 = <&pmx_usb_power_enable>;
+               pinctrl-names = "default";
+
+               usb_power: regulator@1 {
+                       compatible = "regulator-fixed";
+                       reg = <1>;
+                       regulator-name = "USB Power";
+                       regulator-min-microvolt = <5000000>;
+                       regulator-max-microvolt = <5000000>;
+                       enable-active-high;
+                       regulator-always-on;
+                       regulator-boot-on;
+                       gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+               };
+       };
+};
+
+&nand {
+       status = "okay";
+
+       chip-delay = <40>;
+
+       partition@0 {
+               label = "u-boot";
+               reg = <0x0000000 0x0100000>;
+               read-only;
+       };
+
+       partition@100000 {
+               label = "ubi";
+               reg = <0x0100000 0xff00000>;
+       };
+};
+
+&mdio {
+       status = "okay";
+
+       ethphy0: ethernet-phy@0 {
+               reg = <0>;
+       };
+};
+
+&eth0 {
+       status = "okay";
+
+       ethernet0-port@0 {
+               phy-handle = <&ethphy0>;
+       };
+};