+# SPDX-License-Identifier: GPL-2.0-only
#
# Copyright (C) 2009-2013 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
+
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
-NAND_BLOCKSIZE := 2048-128k
-
-define sanitize_profile_name
-$(shell echo $(PROFILE) | tr '[:upper:]' '[:lower:]')
+KERNEL_LOADADDR:=0x8000
+
+# Some info about Ctera firmware:
+# 1. It's simple tar file (GNU standard), but it must have ".firm" suffix.
+# 2. It contains two images: kernel and romdisk. Both are required.
+# 3. Every image has header and trailer file.
+# 4. The struct of tar firmware is: header kernel trailer header romdisk trailer
+# 5. In header file are some strings used to describe image. It was decoded from
+# factory image.
+# 6. Version format in header file is restricted by Original FW.
+# 7. Trailer file contains MD5 sum string of header and image file.
+# 8. Firmware file must have <=24MB size.
+
+define Build/ctera-firmware
+ mkdir -p $@.tmp
+
+ # Prepare header and trailer file for kernel
+ echo "# CTera firmware information file" > $@.tmp/header
+ echo "image_type=kernel" >> $@.tmp/header
+ echo "arch=Kirkwood" >> $@.tmp/header
+ echo "board=Any" >> $@.tmp/header
+ echo "version=3.1.22.30669" >> $@.tmp/header
+ echo "kernel_cmd=console=ttyS0,115200 earlyprintk" >> $@.tmp/header
+ echo "date=$$(date $(if $(SOURCE_DATE_EPOCH),-d@$(SOURCE_DATE_EPOCH)))" \
+ >> $@.tmp/header
+
+ cp $@ $@.tmp/kernel
+
+ echo "MD5=$$(cat $@.tmp/header $@.tmp/kernel | $(MKHASH) md5)" \
+ > $@.tmp/trailer
+
+ tar $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
+ -H gnu -C $@.tmp -cf $@.tar header kernel trailer
+
+ # Prepare header and trailer file for fake romdisk
+ echo "# CTera firmware information file" > $@.tmp/header
+ echo "image_type=romdisk" >> $@.tmp/header
+ echo "initrd=yes" >> $@.tmp/header
+ echo "arch=Kirkwood" >> $@.tmp/header
+ echo "board=Any" >> $@.tmp/header
+ echo "version=3.1.22.30669" >> $@.tmp/header
+ echo "date=$$(date $(if $(SOURCE_DATE_EPOCH),-d@$(SOURCE_DATE_EPOCH)))" \
+ >> $@.tmp/header
+
+ rm -f $@
+ touch $@
+ $(call Build/append-uImage-fakehdr, ramdisk)
+ cp $@ $@.tmp/romdisk
+
+ echo "MD5=$$(cat $@.tmp/header $@.tmp/romdisk | $(MKHASH) md5)" \
+ > $@.tmp/trailer
+
+ tar $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
+ -H gnu -C $@.tmp -rf $@.tar header romdisk trailer
+
+ mv $@.tar $@
+ rm -rf $@.tmp
endef
-define Image/BuildKernel/Template
-
- $(CP) $(KDIR)/zImage $(BIN_DIR)/$(IMG_PREFIX)-zImage
- echo -ne '\x00\x00\x00\x00' >> $(BIN_DIR)/$(IMG_PREFIX)-zImage
- $(call Image/BuildKernel/MkuImage, \
- none, 0x8000, 0x8000, \
- $(BIN_DIR)/$(IMG_PREFIX)-zImage, \
- $(BIN_DIR)/$(IMG_PREFIX)-uImage \
- )
-
- ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
- $(CP) $(KDIR)/zImage-initramfs $(BIN_DIR)/$(IMG_PREFIX)-zImage-initramfs
- echo -ne '\x00\x00\x00\x00' >> $(BIN_DIR)/$(IMG_PREFIX)-zImage-initramfs
- $(call Image/BuildKernel/MkuImage, \
- none, 0x8000, 0x8000, \
- $(BIN_DIR)/$(IMG_PREFIX)-zImage-initramfs, \
- $(BIN_DIR)/$(IMG_PREFIX)-uImage-initramfs \
- )
- endif
-
- ifneq ($(1),)
- $(CP) $(DTS_DIR)/kirkwood-$(1).dtb $(BIN_DIR)/$(IMG_PREFIX)-$(1).dtb
-
- $(CP) $(KDIR)/zImage $(BIN_DIR)/$(IMG_PREFIX)-$(call sanitize_profile_name)-zImage
- cat $(BIN_DIR)/$(IMG_PREFIX)-$(1).dtb >> $(BIN_DIR)/$(IMG_PREFIX)-$(call sanitize_profile_name)-zImage
- $(call Image/BuildKernel/MkuImage, \
- none, 0x8000, 0x8000, \
- $(BIN_DIR)/$(IMG_PREFIX)-$(call sanitize_profile_name)-zImage, \
- $(BIN_DIR)/$(IMG_PREFIX)-$(call sanitize_profile_name)-uImage \
- )
-
- ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
- $(CP) $(KDIR)/zImage-initramfs $(BIN_DIR)/$(IMG_PREFIX)-$(call sanitize_profile_name)-zImage-initramfs
- cat $(BIN_DIR)/$(IMG_PREFIX)-$(1).dtb >> $(BIN_DIR)/$(IMG_PREFIX)-$(call sanitize_profile_name)-zImage-initramfs
- $(call Image/BuildKernel/MkuImage, \
- none, 0x8000, 0x8000, \
- $(BIN_DIR)/$(IMG_PREFIX)-$(call sanitize_profile_name)-zImage-initramfs, \
- $(BIN_DIR)/$(IMG_PREFIX)-$(call sanitize_profile_name)-uImage-initramfs \
- )
- endif
- endif
+define Device/kernel-size-migration
+ DEVICE_COMPAT_VERSION := 2.0
+ DEVICE_COMPAT_MESSAGE := Partition design has changed compared to \
+ older versions (up to 21.02) due to kernel size restrictions. \
+ Upgrade via sysupgrade mechanism is not possible, so new \
+ installation via factory style image is required.
endef
-define Image/InstallKernel/Template
-
- ifneq ($(CONFIG_TARGET_ROOTFS_INCLUDE_KERNEL),)
- $(INSTALL_DIR) $(TARGET_DIR)/boot
- ifneq ($(CONFIG_TARGET_ROOTFS_INCLUDE_UIMAGE),)
- $(CP) $(BIN_DIR)/$(IMG_PREFIX)-uImage $(TARGET_DIR)/boot/
- ln -sf $(IMG_PREFIX)-uImage $(TARGET_DIR)/boot/uImage
- endif
- ifneq ($(CONFIG_TARGET_ROOTFS_INCLUDE_ZIMAGE),)
- $(CP) $(BIN_DIR)/$(IMG_PREFIX)-zImage $(TARGET_DIR)/boot/
- ln -sf $(IMG_PREFIX)-zImage $(TARGET_DIR)/boot/zImage
- endif
- endif
-
- ifneq ($(CONFIG_TARGET_ROOTFS_INCLUDE_DTB),)
- $(INSTALL_DIR) $(TARGET_DIR)/boot
- ifneq ($(1),)
- $(CP) $(BIN_DIR)/$(IMG_PREFIX)-$(1).dtb $(TARGET_DIR)/boot/
- ln -sf $(IMG_PREFIX)-$(1).dtb $(TARGET_DIR)/boot/$(1).dtb
- endif
- endif
+define Device/Default
+ PROFILES := Default
+ DEVICE_DTS = kirkwood-$(lastword $(subst _, ,$(1)))
+ KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
+ KERNEL := kernel-bin | append-dtb | uImage none
+ KERNEL_NAME := zImage
+ KERNEL_SUFFIX := -uImage
+ KERNEL_IN_UBI := 1
+
+ PAGESIZE := 2048
+ SUBPAGESIZE := 512
+ BLOCKSIZE := 128k
+ IMAGES := sysupgrade.bin factory.bin
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+ IMAGE/factory.bin := append-ubi
endef
-define Image/Build/jffs2-nand-2048-128k
- dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-$(call sanitize_profile_name)-$(1).img \
- bs=2048 conv=sync
+define Device/checkpoint_l-50
+ DEVICE_VENDOR := Check Point
+ DEVICE_MODEL := L-50
+ DEVICE_PACKAGES := kmod-ath9k kmod-gpio-button-hotplug kmod-mvsdio \
+ kmod-rtc-s35390a kmod-usb-ledtrig-usbport wpad-basic-mbedtls
+ IMAGES := sysupgrade.bin
endef
-
-define Image/Build/squashfs
- $(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
- ( \
- dd if=$(KDIR)/zImage bs=4096k conv=sync; \
- dd if=$(KDIR)/root.$(1) bs=128k conv=sync; \
- ) > $(BIN_DIR)/$(IMG_PREFIX)-$(call sanitize_profile_name)-$(1).img
+TARGET_DEVICES += checkpoint_l-50
+
+define Device/cisco_on100
+ DEVICE_VENDOR := Cisco Systems
+ DEVICE_MODEL := ON100
+ KERNEL_SIZE := 5376k
+ KERNEL_IN_UBI :=
+ UBINIZE_OPTS := -E 5
+ IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
+ DEVICE_PACKAGES := kmod-mvsdio kmod-rtc-mv
+ SUPPORTED_DEVICES += on100
endef
-
-define Image/mkfs/targz
-
- $(TAR) -czpf $(BIN_DIR)/$(IMG_PREFIX)-$(call sanitize_profile_name)-rootfs.tar.gz --numeric-owner --owner=0 --group=0 -C $(TARGET_DIR)/ .
+TARGET_DEVICES += cisco_on100
+
+define Device/cloudengines_pogoe02
+ DEVICE_VENDOR := Cloud Engines
+ DEVICE_MODEL := Pogoplug E02
+ DEVICE_DTS := kirkwood-pogo_e02
+ DEVICE_PACKAGES := kmod-rtc-mv
+ SUPPORTED_DEVICES += pogo_e02
endef
-
-define Image/Build/ubifs
-
- ifneq ($($(PROFILE)_UBIFS_OPTS),)
- $(CP) $(KDIR)/root.ubifs $(BIN_DIR)/$(IMG_PREFIX)-$(call sanitize_profile_name)-rootfs.ubifs
- endif
+TARGET_DEVICES += cloudengines_pogoe02
+
+define Device/cloudengines_pogoplugv4
+ DEVICE_VENDOR := Cloud Engines
+ DEVICE_MODEL := Pogoplug V4
+ DEVICE_DTS := kirkwood-pogoplug-series-4
+ DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 kmod-mvsdio kmod-usb3 \
+ kmod-gpio-button-hotplug kmod-rtc-mv
endef
-
-define Image/Build/ubi
-
- ifneq ($($(PROFILE)_UBI_OPTS),)
- $(CP) $(KDIR)/root.ubi $(BIN_DIR)/$(IMG_PREFIX)-$(call sanitize_profile_name)-rootfs.ubi
- endif
+TARGET_DEVICES += cloudengines_pogoplugv4
+
+define Device/ctera_c200-v1
+ DEVICE_VENDOR := Ctera
+ DEVICE_MODEL := C200
+ DEVICE_VARIANT := V1
+ DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-gpio-button-hotplug \
+ kmod-hwmon-lm63 kmod-rtc-s35390a kmod-usb-ledtrig-usbport
+ KERNEL := kernel-bin | append-dtb | uImage none | ctera-firmware
+ KERNEL_IN_UBI :=
+ KERNEL_SUFFIX := -factory.firm
+ IMAGES := sysupgrade.bin
endef
+TARGET_DEVICES += ctera_c200-v1
+
+define Device/endian_4i-edge-200
+ DEVICE_VENDOR := Endian
+ DEVICE_MODEL := 4i Edge 200
+ DEVICE_ALT0_VENDOR := Endian
+ DEVICE_ALT0_MODEL := UTM Mini Firewall
+ DEVICE_PACKAGES := kmod-ath9k kmod-mvsdio wpad-basic-mbedtls kmod-rtc-mv
+ KERNEL_SIZE := 4096k
+ IMAGES := sysupgrade.bin
+endef
+TARGET_DEVICES += endian_4i-edge-200
-Image/BuildKernel/Template/Generic=$(call Image/BuildKernel/Template)
-Image/InstallKernel/Template/Generic=$(call Image/InstallKernel/Template)
-
-Image/BuildKernel/Template/DOCKSTAR=$(call Image/BuildKernel/Template,dockstar)
-Image/InstallKernel/Template/DOCKSTAR=$(call Image/InstallKernel/Template,dockstar)
-
-Image/BuildKernel/Template/EA3500=$(call Image/BuildKernel/Template,ea3500)
-Image/InstallKernel/Template/EA3500=$(call Image/InstallKernel/Template,ea3500)
-
-Image/BuildKernel/Template/EA4500=$(call Image/BuildKernel/Template,ea4500)
-Image/InstallKernel/Template/EA4500=$(call Image/InstallKernel/Template,ea4500)
-
-Image/BuildKernel/Template/GOFLEXNET=$(call Image/BuildKernel/Template,goflexnet)
-Image/InstallKernel/Template/GOFLEXNET=$(call Image/InstallKernel/Template,goflexnet)
-
-Image/BuildKernel/Template/IB62X0=$(call Image/BuildKernel/Template,ib62x0)
-Image/InstallKernel/Template/IB62X0=$(call Image/InstallKernel/Template,ib62x0)
-
-Image/BuildKernel/Template/ICONNECT=$(call Image/BuildKernel/Template,iconnect)
-Image/InstallKernel/Template/ICONNECT=$(call Image/InstallKernel/Template,iconnect)
+define Device/globalscale_sheevaplug
+ DEVICE_VENDOR := Globalscale
+ DEVICE_MODEL := Sheevaplug
+ DEVICE_PACKAGES := kmod-mvsdio kmod-rtc-mv
+endef
+TARGET_DEVICES += globalscale_sheevaplug
+
+define Device/iom_iconnect-1.1
+ DEVICE_VENDOR := Iomega
+ DEVICE_MODEL := Iconnect
+ DEVICE_PACKAGES := kmod-rtc-mv
+ DEVICE_DTS := kirkwood-iconnect
+ SUPPORTED_DEVICES += iconnect
+endef
+TARGET_DEVICES += iom_iconnect-1.1
+
+define Device/iom_ix2-200
+ DEVICE_VENDOR := Iomega
+ DEVICE_MODEL := StorCenter ix2-200
+ DEVICE_DTS := kirkwood-iomega_ix2_200
+ DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \
+ kmod-gpio-button-hotplug kmod-hwmon-lm63 kmod-rtc-mv
+ PAGESIZE := 512
+ SUBPAGESIZE := 256
+ BLOCKSIZE := 16k
+ KERNEL_SIZE := 3072k
+ KERNEL_IN_UBI :=
+ UBINIZE_OPTS := -E 5
+ IMAGE_SIZE := 31744k
+ IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
+ check-size
+endef
+TARGET_DEVICES += iom_ix2-200
+
+define Device/iom_ix4-200d
+ DEVICE_VENDOR := Iomega
+ DEVICE_MODEL := StorCenter ix4-200d
+ DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \
+ kmod-gpio-button-hotplug kmod-gpio-nxp-74hc164 \
+ kmod-hwmon-adt7475 kmod-mvsdio kmod-spi-gpio kmod-rtc-mv
+ PAGESIZE := 512
+ SUBPAGESIZE := 256
+ BLOCKSIZE := 16k
+ KERNEL_SIZE := 3072k
+ KERNEL_IN_UBI :=
+ UBINIZE_OPTS := -E 5
+ IMAGE_SIZE := 31744k
+ IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
+ check-size
+endef
+TARGET_DEVICES += iom_ix4-200d
+
+define Device/iptime_nas1
+ DEVICE_VENDOR := ipTIME
+ DEVICE_MODEL := NAS1
+ DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \
+ kmod-gpio-button-hotplug kmod-gpio-pca953x kmod-hwmon-drivetemp \
+ kmod-hwmon-gpiofan kmod-usb-ledtrig-usbport kmod-rtc-mv -uboot-envtools
+ KERNEL := $$(KERNEL) | iptime-naspkg nas1
+ BLOCKSIZE := 256k
+ IMAGE_SIZE := 15872k
+ IMAGES := sysupgrade.bin
+ IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
+ check-size | append-metadata
+endef
+TARGET_DEVICES += iptime_nas1
+
+define Device/linksys
+ DEVICE_VENDOR := Linksys
+ DEVICE_PACKAGES := kmod-mwl8k wpad-basic-mbedtls kmod-gpio-button-hotplug \
+ kmod-rtc-mv
+ KERNEL_IN_UBI :=
+ UBINIZE_OPTS := -E 5
+ IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
+endef
-Image/BuildKernel/Template/POGOE02=$(call Image/BuildKernel/Template,pogo_e02)
-Image/InstallKernel/Template/POGOE02=$(call Image/InstallKernel/Template,pogo_e02)
+define Device/linksys_e4200-v2
+ $(Device/linksys)
+ $(Device/kernel-size-migration)
+ DEVICE_MODEL := E4200
+ DEVICE_VARIANT := v2
+ KERNEL_SIZE := 3072k
+ SUPPORTED_DEVICES += linksys,viper linksys-viper
+endef
+TARGET_DEVICES += linksys_e4200-v2
+
+define Device/linksys_ea3500
+ $(Device/linksys)
+ $(Device/kernel-size-migration)
+ DEVICE_MODEL := EA3500
+ PAGESIZE := 512
+ SUBPAGESIZE := 256
+ BLOCKSIZE := 16k
+ KERNEL_SIZE := 3072k
+ SUPPORTED_DEVICES += linksys,audi linksys-audi
+endef
+TARGET_DEVICES += linksys_ea3500
+
+define Device/linksys_ea4500
+ $(Device/linksys)
+ $(Device/kernel-size-migration)
+ DEVICE_MODEL := EA4500
+ KERNEL_SIZE := 3072k
+ SUPPORTED_DEVICES += linksys,viper linksys-viper
+endef
+TARGET_DEVICES += linksys_ea4500
+
+define Device/netgear_readynas-duo-v2
+ DEVICE_VENDOR := NETGEAR
+ DEVICE_MODEL := ReadyNAS Duo
+ DEVICE_VARIANT := v2
+ DEVICE_DTS := kirkwood-netgear_readynas_duo_v2
+ KERNEL_IN_UBI :=
+ IMAGES := sysupgrade.bin
+ DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \
+ kmod-gpio-button-hotplug kmod-hwmon-g762 kmod-rtc-rs5c372a kmod-usb3
+endef
+TARGET_DEVICES += netgear_readynas-duo-v2
+
+define Device/netgear_stora
+ DEVICE_VENDOR := Netgear
+ DEVICE_MODEL := Stora (MS2000/2110)
+ DEVICE_DTS := kirkwood-stora
+ DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \
+ kmod-rtc-pcf8563 kmod-hwmon-lm75 kmod-hwmon-tc654 \
+ kmod-gpio-button-hotplug
+endef
+TARGET_DEVICES += netgear_stora
+
+define Device/raidsonic_ib-nas62x0
+ DEVICE_VENDOR := RaidSonic
+ DEVICE_MODEL := ICY BOX IB-NAS62x0
+ DEVICE_DTS := kirkwood-ib62x0
+ DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 kmod-rtc-mv
+ SUPPORTED_DEVICES += ib62x0
+endef
+TARGET_DEVICES += raidsonic_ib-nas62x0
+
+define Device/seagate_blackarmor-nas220
+ DEVICE_VENDOR := Seagate
+ DEVICE_MODEL := Blackarmor NAS220
+ DEVICE_PACKAGES := kmod-hwmon-adt7475 kmod-fs-ext4 kmod-ata-marvell-sata \
+ mdadm kmod-gpio-button-hotplug kmod-rtc-mv
+ PAGESIZE := 512
+ SUBPAGESIZE := 256
+ BLOCKSIZE := 16k
+ UBINIZE_OPTS := -e 1
+endef
+TARGET_DEVICES += seagate_blackarmor-nas220
-Image/BuildKernel/Template/IOMEGA_IX2_200=$(call Image/BuildKernel/Template,iomega_ix2_200)
-Image/InstallKernel/Template/IOMEGA_IX2_200=$(call Image/InstallKernel/Template,iomega_ix2_200)
+define Device/seagate_dockstar
+ DEVICE_VENDOR := Seagate
+ DEVICE_MODEL := FreeAgent Dockstar
+ DEVICE_PACKAGES := kmod-rtc-mv
+ SUPPORTED_DEVICES += dockstar
+endef
+TARGET_DEVICES += seagate_dockstar
-define Image/BuildKernel
- $(call Image/BuildKernel/Template/$(PROFILE))
+define Device/seagate_goflexnet
+ DEVICE_VENDOR := Seagate
+ DEVICE_MODEL := GoFlexNet
+ DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 kmod-rtc-mv
+ SUPPORTED_DEVICES += goflexnet
endef
+TARGET_DEVICES += seagate_goflexnet
-define Image/InstallKernel
- $(call Image/InstallKernel/Template/$(PROFILE))
+define Device/seagate_goflexhome
+ DEVICE_VENDOR := Seagate
+ DEVICE_MODEL := GoFlexHome
+ DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 kmod-rtc-mv
+ SUPPORTED_DEVICES += goflexhome
endef
+TARGET_DEVICES += seagate_goflexhome
+
+define Device/zyxel_nsa310b
+ DEVICE_VENDOR := ZyXEL
+ DEVICE_MODEL := NSA310b
+ DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-r8169 kmod-fs-ext4 \
+ kmod-gpio-button-hotplug kmod-hwmon-lm85 kmod-rtc-mv
+ SUPPORTED_DEVICES += nsa310b
+endef
+TARGET_DEVICES += zyxel_nsa310b
-define Image/Build
- $(if $(Image/Build/$(1)), \
- $(call Image/Build/$(1),$(1)), \
- $(CP) $(KDIR)/root.$(1) $(BIN_DIR)/$(IMG_PREFIX)-$(call sanitize_profile_name)-$(1).img \
- )
+define Device/zyxel_nsa310s
+ DEVICE_VENDOR := ZyXEL
+ DEVICE_MODEL := NSA310S
+ DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 kmod-gpio-button-hotplug
+endef
+TARGET_DEVICES += zyxel_nsa310s
+
+define Device/zyxel_nsa325
+ DEVICE_VENDOR := ZyXEL
+ DEVICE_MODEL := NSA325
+ DEVICE_VARIANT := v1/v2
+ DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \
+ kmod-gpio-button-hotplug kmod-rtc-pcf8563 kmod-usb3
+ SUPPORTED_DEVICES += nsa325
endef
+TARGET_DEVICES += zyxel_nsa325
$(eval $(call BuildImage))
projects / openwrt / openwrt.git / blobdiff