kirkwood: drop kernel 5.4 support

[openwrt/openwrt.git] / target / linux / kirkwood / patches-5.4 / 101-iconnect.patch

diff --git a/target/linux/kirkwood/patches-5.4/101-iconnect.patch b/target/linux/kirkwood/patches-5.4/101-iconnect.patch
deleted file mode 100644 (file)
index 935e2df..0000000
--- a/target/linux/kirkwood/patches-5.4/101-iconnect.patch
+++ /dev/null
@@ -1,80 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-iconnect.dts
-+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
-@@ -8,6 +8,13 @@
-       model = "Iomega Iconnect";
-       compatible = "iom,iconnect-1.1", "iom,iconnect", "marvell,kirkwood-88f6281", "marvell,kirkwood";
- 
-+      aliases {
-+              led-boot = &led_power_blue;
-+              led-failsafe = &led_power_red;
-+              led-running = &led_power_blue;
-+              led-upgrade = &led_power_red;
-+      };
-+
-       memory {
-               device_type = "memory";
-               reg = <0x00000000 0x10000000>;
-@@ -16,8 +23,6 @@
-       chosen {
-               bootargs = "console=ttyS0,115200n8 earlyprintk";
-               stdout-path = &uart0;
--              linux,initrd-start = <0x4500040>;
--              linux,initrd-end   = <0x4800000>;
-       };
- 
-       ocp@f1000000 {
-@@ -89,12 +94,12 @@
-                       gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-                       default-state = "on";
-               };
--              power-blue {
-+              led_power_blue: power-blue {
-                       label = "power:blue";
-                       gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
--                      default-state = "keep";
-+                      default-state = "on";
-               };
--              power-red {
-+              led_power_red: power-red {
-                       label = "power:red";
-                       gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
-               };
-@@ -146,28 +151,23 @@
-       status = "okay";
- 
-       partition@0 {
--              label = "uboot";
--              reg = <0x0000000 0xc0000>;
-+              label = "u-boot";
-+              reg = <0x0000000 0xe0000>;
-       };
- 
--      partition@a0000 {
--              label = "env";
--              reg = <0xa0000 0x20000>;
-+      partition@e0000 {
-+              label = "u-boot environment";
-+              reg = <0xe0000 0x100000>;
-       };
- 
-       partition@100000 {
--              label = "zImage";
--              reg = <0x100000 0x300000>;
--      };
--
--      partition@540000 {
--              label = "initrd";
--              reg = <0x540000 0x300000>;
-+              label = "second stage u-boot";
-+              reg = <0x100000 0x200000>;
-       };
- 
--      partition@980000 {
--              label = "boot";
--              reg = <0x980000 0x1f400000>;
-+      partition@200000 {
-+              label = "ubi";
-+              reg = <0x200000 0x1fe00000>;
-       };
- };
-