kirkwood: copy files and config from 4.19 to 5.4

[openwrt/openwrt.git] / target / linux / kirkwood / patches-5.4 / 105-ea4500.patch

diff --git a/target/linux/kirkwood/patches-5.4/105-ea4500.patch b/target/linux/kirkwood/patches-5.4/105-ea4500.patch
new file mode 100644 (file)
index 0000000..4c3c82b
--- /dev/null
+++ b/target/linux/kirkwood/patches-5.4/105-ea4500.patch
@@ -0,0 +1,144 @@
+--- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts
++++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
+@@ -24,6 +24,10 @@
+       };
+ 
+       aliases {
++              led-boot = &led_white_health;
++              led-failsafe = &led_white_health;
++              led-running = &led_white_health;
++              led-upgrade = &led_white_health;
+               serial0 = &uart0;
+       };
+ 
+@@ -56,9 +60,10 @@
+               pinctrl-0 = < &pmx_led_white_health &pmx_led_white_pulse >;
+               pinctrl-names = "default";
+ 
+-              white-health {
++              led_white_health: white-health {
+                       label = "viper:white:health";
+                       gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
++                      default-state = "on";
+               };
+ 
+               white-pulse {
+@@ -67,9 +72,18 @@
+               };
+       };
+ 
+-      dsa {
+-              status = "disabled";
++      mvsw61xx {
++              compatible = "marvell,88e6171";
++              status = "okay";
++              reg = <0x10>;
++
++              mii-bus = <&mdio>;
++              cpu-port-0 = <5>;
++              cpu-port-1 = <6>;
++              is-indirect;
++      };
+ 
++      dsa {
+               compatible = "marvell,dsa";
+               #address-cells = <2>;
+               #size-cells = <0>;
+@@ -161,22 +175,22 @@
+               };
+ 
+               partition@200000 {
+-                      label = "kernel";
++                      label = "kernel1";
+                       reg = <0x200000 0x2A0000>;
+               };
+ 
+               partition@4a0000 {
+-                      label = "rootfs";
++                      label = "rootfs1";
+                       reg = <0x4A0000 0x1760000>;
+               };
+ 
+               partition@1c00000 {
+-                      label = "alt_kernel";
++                      label = "kernel2";
+                       reg = <0x1C00000 0x2A0000>;
+               };
+ 
+               partition@1ea0000 {
+-                      label = "alt_rootfs";
++                      label = "rootfs2";
+                       reg = <0x1EA0000 0x1760000>;
+               };
+ 
+@@ -207,53 +221,6 @@
+ 
+ &mdio {
+       status = "okay";
+-
+-      switch@10 {
+-              compatible = "marvell,mv88e6085";
+-              #address-cells = <1>;
+-              #size-cells = <0>;
+-              reg = <16>;
+-
+-              ports {
+-                      #address-cells = <1>;
+-                      #size-cells = <0>;
+-
+-                      port@0 {
+-                              reg = <0>;
+-                              label = "ethernet1";
+-                      };
+-
+-                      port@1 {
+-                              reg = <1>;
+-                              label = "ethernet2";
+-                      };
+-
+-                      port@2 {
+-                              reg = <2>;
+-                              label = "ethernet3";
+-                      };
+-
+-                      port@3 {
+-                              reg = <3>;
+-                              label = "ethernet4";
+-                      };
+-
+-                      port@4 {
+-                              reg = <4>;
+-                              label = "internet";
+-                      };
+-
+-                      port@5 {
+-                              reg = <5>;
+-                              label = "cpu";
+-                              ethernet = <&eth0port>;
+-                              fixed-link {
+-                                      speed = <1000>;
+-                                      full-duplex;
+-                              };
+-                      };
+-              };
+-      };
+ };
+ 
+ &uart0 {
+@@ -272,10 +239,14 @@
+ };
+ 
+ /* eth1 is connected to the switch at port 6. However DSA only supports a
+- * single CPU port. So leave this port disabled to avoid confusion.
++ * single CPU port. Upstream uses DSA so they disable this port to avoid confusion.
+  */
+ &eth1 {
+-      status = "disabled";
++      status = "okay";
++      ethernet1-port@0 {
++              speed = <1000>;
++              duplex = <1>;
++      };
+ };
+ 
+ /* There is no battery on the board, so the RTC does not keep