kernel/kirkwood: Create kernel files for v6.6 (from v6.1)

[openwrt/openwrt.git] / target / linux / kirkwood / patches-6.1 / 102-dockstar.patch

diff --git a/target/linux/kirkwood/patches-6.1/102-dockstar.patch b/target/linux/kirkwood/patches-6.1/102-dockstar.patch
deleted file mode 100644 (file)
index 127f849..0000000
--- a/target/linux/kirkwood/patches-6.1/102-dockstar.patch
+++ /dev/null
@@ -1,62 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-dockstar.dts
-+++ b/arch/arm/boot/dts/kirkwood-dockstar.dts
-@@ -8,6 +8,13 @@
-       model = "Seagate FreeAgent Dockstar";
-       compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood";
- 
-+      aliases {
-+              led-boot = &led_health;
-+              led-failsafe = &led_fault;
-+              led-running = &led_health;
-+              led-upgrade = &led_fault;
-+      };
-+
-       memory {
-               device_type = "memory";
-               reg = <0x00000000 0x8000000>;
-@@ -42,12 +49,12 @@
-               pinctrl-0 = <&pmx_led_green &pmx_led_orange>;
-               pinctrl-names = "default";
- 
--              health {
-+              led_health: health {
-                       label = "status:green:health";
-                       gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
--                      default-state = "keep";
-+                      default-state = "on";
-               };
--              fault {
-+              led_fault: fault {
-                       label = "status:orange:fault";
-                       gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-               };
-@@ -78,18 +85,22 @@
- 
-       partition@0 {
-               label = "u-boot";
--              reg = <0x0000000 0x100000>;
--              read-only;
-+              reg = <0x0000000 0xe0000>;
-+      };
-+
-+      partition@e0000 {
-+              label = "u-boot environment";
-+              reg = <0xe0000 0x100000>;
-       };
- 
-       partition@100000 {
--              label = "uImage";
--              reg = <0x0100000 0x400000>;
-+              label = "second stage u-boot";
-+              reg = <0x100000 0x200000>;
-       };
- 
--      partition@500000 {
--              label = "data";
--              reg = <0x0500000 0xfb00000>;
-+      partition@200000 {
-+              label = "ubi";
-+              reg = <0x200000 0xfe00000>;
-       };
- };
-