kernel/kirkwood: Restore kernel files for v6.1

[openwrt/openwrt.git] / target / linux / kirkwood / patches-6.1 / 102-dockstar.patch

diff --git a/target/linux/kirkwood/patches-6.1/102-dockstar.patch b/target/linux/kirkwood/patches-6.1/102-dockstar.patch
new file mode 100644 (file)
index 0000000..127f849
--- /dev/null
+++ b/target/linux/kirkwood/patches-6.1/102-dockstar.patch
@@ -0,0 +1,62 @@
+--- a/arch/arm/boot/dts/kirkwood-dockstar.dts
++++ b/arch/arm/boot/dts/kirkwood-dockstar.dts
+@@ -8,6 +8,13 @@
+       model = "Seagate FreeAgent Dockstar";
+       compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+ 
++      aliases {
++              led-boot = &led_health;
++              led-failsafe = &led_fault;
++              led-running = &led_health;
++              led-upgrade = &led_fault;
++      };
++
+       memory {
+               device_type = "memory";
+               reg = <0x00000000 0x8000000>;
+@@ -42,12 +49,12 @@
+               pinctrl-0 = <&pmx_led_green &pmx_led_orange>;
+               pinctrl-names = "default";
+ 
+-              health {
++              led_health: health {
+                       label = "status:green:health";
+                       gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+-                      default-state = "keep";
++                      default-state = "on";
+               };
+-              fault {
++              led_fault: fault {
+                       label = "status:orange:fault";
+                       gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+               };
+@@ -78,18 +85,22 @@
+ 
+       partition@0 {
+               label = "u-boot";
+-              reg = <0x0000000 0x100000>;
+-              read-only;
++              reg = <0x0000000 0xe0000>;
++      };
++
++      partition@e0000 {
++              label = "u-boot environment";
++              reg = <0xe0000 0x100000>;
+       };
+ 
+       partition@100000 {
+-              label = "uImage";
+-              reg = <0x0100000 0x400000>;
++              label = "second stage u-boot";
++              reg = <0x100000 0x200000>;
+       };
+ 
+-      partition@500000 {
+-              label = "data";
+-              reg = <0x0500000 0xfb00000>;
++      partition@200000 {
++              label = "ubi";
++              reg = <0x200000 0xfe00000>;
+       };
+ };
+