kernel/kirkwood: Create kernel files for v6.6 (from v6.1)

[openwrt/openwrt.git] / target / linux / kirkwood / patches-6.6 / 101-iconnect.patch

diff --git a/target/linux/kirkwood/patches-6.6/101-iconnect.patch b/target/linux/kirkwood/patches-6.6/101-iconnect.patch
new file mode 100644 (file)
index 0000000..935e2df
--- /dev/null
+++ b/target/linux/kirkwood/patches-6.6/101-iconnect.patch
@@ -0,0 +1,80 @@
+--- a/arch/arm/boot/dts/kirkwood-iconnect.dts
++++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
+@@ -8,6 +8,13 @@
+       model = "Iomega Iconnect";
+       compatible = "iom,iconnect-1.1", "iom,iconnect", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+ 
++      aliases {
++              led-boot = &led_power_blue;
++              led-failsafe = &led_power_red;
++              led-running = &led_power_blue;
++              led-upgrade = &led_power_red;
++      };
++
+       memory {
+               device_type = "memory";
+               reg = <0x00000000 0x10000000>;
+@@ -16,8 +23,6 @@
+       chosen {
+               bootargs = "console=ttyS0,115200n8 earlyprintk";
+               stdout-path = &uart0;
+-              linux,initrd-start = <0x4500040>;
+-              linux,initrd-end   = <0x4800000>;
+       };
+ 
+       ocp@f1000000 {
+@@ -89,12 +94,12 @@
+                       gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+                       default-state = "on";
+               };
+-              power-blue {
++              led_power_blue: power-blue {
+                       label = "power:blue";
+                       gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+-                      default-state = "keep";
++                      default-state = "on";
+               };
+-              power-red {
++              led_power_red: power-red {
+                       label = "power:red";
+                       gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+               };
+@@ -146,28 +151,23 @@
+       status = "okay";
+ 
+       partition@0 {
+-              label = "uboot";
+-              reg = <0x0000000 0xc0000>;
++              label = "u-boot";
++              reg = <0x0000000 0xe0000>;
+       };
+ 
+-      partition@a0000 {
+-              label = "env";
+-              reg = <0xa0000 0x20000>;
++      partition@e0000 {
++              label = "u-boot environment";
++              reg = <0xe0000 0x100000>;
+       };
+ 
+       partition@100000 {
+-              label = "zImage";
+-              reg = <0x100000 0x300000>;
+-      };
+-
+-      partition@540000 {
+-              label = "initrd";
+-              reg = <0x540000 0x300000>;
++              label = "second stage u-boot";
++              reg = <0x100000 0x200000>;
+       };
+ 
+-      partition@980000 {
+-              label = "boot";
+-              reg = <0x980000 0x1f400000>;
++      partition@200000 {
++              label = "ubi";
++              reg = <0x200000 0x1fe00000>;
+       };
+ };
+