/dts-v1/;
-/include/ "ar9.dtsi"
+#include "ar9.dtsi"
/ {
model = "P2601HNFX - ZyXEL P-2601HN-Fx";
chosen {
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+ };
- leds {
- dsl = &dsl;
- internet = &online;
- power = &power;
- power2 = &power2;
- wifi = &wifi;
- };
+ aliases {
+ led-boot = &power_green;
+ led-failsafe = &power_red;
+ led-running = &power_green;
+
+ led-dsl = &dsl;
+ led-internet = &online;
+ led-wifi = &wifi;
};
memory@0 {
};
fpi@10000000 {
- #address-cells = <1>;
- #size-cells = <1>;
localbus@0 {
- #address-cells = <2>;
- #size-cells = <1>;
- ranges = <0 0 0x0 0x3ffffff
- 1 0 0x4000000 0x4000010>;
- compatible = "lantiq,localbus", "simple-bus";
-
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
- partition@0 {
- label = "uboot";
- reg = <0x00000 0x40000>;
- read-only;
- };
-
- partition@40000 {
- label = "uboot_env";
- reg = <0x40000 0x20000>;
- read-only;
- };
-
- partition@60000 {
- label = "firmware";
- reg = <0x60000 0xfa0000>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x00000 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "uboot_env";
+ reg = <0x40000 0x20000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "firmware";
+ reg = <0x60000 0xfa0000>;
+ };
};
};
};
gpio: pinmux@E100B10 {
- compatible = "lantiq,pinctrl-xr9";
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
- #gpio-cells = <2>;
- gpio-controller;
- reg = <0xE100B10 0xA0>;
-
state_default: pinmux {
stp {
lantiq,groups = "stp";
ifxhcd@E101000 {
status = "okay";
- gpios = <&gpio 9 0>;
+ gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
};
stp: stp@E100BB0 {
lantiq,shadow = <0xfff>;
lantiq,groups = <0x3>;
};
-
- pci@E105400 {
- lantiq,bus-clock = <33333333>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <0x7000 0 0 1 &icu0 29 1>;
- gpios-reset = <&gpio 21 0>;
- req-mask = <0x1>;
- };
};
gpio-keys-polled {
reset {
label = "reset";
- gpios = <&gpio 53 1>;
- linux,code = <0x198>;
+ gpios = <&gpio 53 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
};
rfkill {
label = "rfkill";
- gpios = <&gpio 54 1>;
- linux,code = <0xf7>;
+ gpios = <&gpio 54 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
};
};
gpio-leds {
compatible = "gpio-leds";
- power: power {
- label = "power";
- gpios = <&stp 11 1>;
- default-state = "on";
+ power_green: power {
+ label = "p2601hnfx:green:power";
+ gpios = <&stp 11 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
};
- power2: power2 {
- label = "power2";
- gpios = <&gpio 29 1>;
+ power_red: power2 {
+ label = "p2601hnfx:red:power";
+ gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
};
online: online {
- label = "online";
- gpios = <&stp 13 1>;
+ label = "p2601hnfx:green:internet";
+ gpios = <&stp 13 GPIO_ACTIVE_LOW>;
};
online2 {
- label = "online2";
- gpios = <&stp 12 1>;
+ label = "p2601hnfx:red:internet";
+ gpios = <&stp 12 GPIO_ACTIVE_LOW>;
};
dsl: dsl {
- label = "dsl";
- gpios = <&stp 14 1>;
+ label = "p2601hnfx:green:dsl";
+ gpios = <&stp 14 GPIO_ACTIVE_LOW>;
};
phone {
- label = "phone";
- gpios = <&stp 9 1>;
+ label = "p2601hnfx:green:phone";
+ gpios = <&stp 9 GPIO_ACTIVE_LOW>;
};
phone2 {
- label = "phone2";
- gpios = <&stp 8 1>;
+ label = "p2601hnfx:orange:phone";
+ gpios = <&stp 8 GPIO_ACTIVE_LOW>;
};
wifi: wifi {
- label = "wifi";
- gpios = <&stp 15 1>;
+ label = "p2601hnfx:green:wireless";
+ gpios = <&stp 15 GPIO_ACTIVE_LOW>;
};
wifi2 {
- label = "wifi2";
- gpios = <&stp 10 1>;
+ label = "p2601hnfx:orange:wireless";
+ gpios = <&stp 10 GPIO_ACTIVE_LOW>;
};
};
switch {
gpio-export,name = "switch";
gpio-export,output = <1>;
- gpios = <&gpio 50 0>;
+ gpios = <&gpio 50 GPIO_ACTIVE_HIGH>;
};
usb {
gpio-export,name = "wifi";
gpio-export,output = <1>;
- gpios = <&gpio 9 0>;
+ gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
};
};
};