lantiq: remove support for kernel 4.19

[openwrt/openwrt.git] / target / linux / lantiq / files / arch / mips / boot / dts / lantiq / amazonse_netgear_dgn1000b.dts

diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/amazonse_netgear_dgn1000b.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/amazonse_netgear_dgn1000b.dts
new file mode 100644 (file)
index 0000000..144667f
--- /dev/null
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/amazonse_netgear_dgn1000b.dts
@@ -0,0 +1,151 @@
+#include "amazonse.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       compatible = "netgear,dgn1000b", "lantiq,xway", "lantiq,ase";
+       model = "Netgear DGN1000B";
+
+       chosen {
+               bootargs = "console=ttyLTQ0,115200";
+       };
+
+       aliases {
+               led-boot = &power;
+               led-failsafe = &power;
+               led-running = &power;
+               led-upgrade = &power;
+
+               led-dsl = &dsl;
+               led-internet = &online_green;
+       };
+
+       memory@0 {
+               device_type = "memory";
+               reg = <0x0 0x1000000>;
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               poll-interval = <100>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+               rfkill {
+                       label = "rfkill";
+                       gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RFKILL>;
+               };
+               wps {
+                       label = "wps";
+                       gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+               dsl: dsl {
+                       label = "green:dsl";
+                       gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+                       default-state = "on";
+               };
+               online_green: online {
+                       label = "green:online";
+                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+                       default-state = "on";
+               };
+               online2 {
+                       label = "red:online";
+                       gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+                       default-state = "on";
+               };
+               wps {
+                       label = "green:wps";
+                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+                       default-state = "on";
+               };
+               power: power {
+                       label = "green:power";
+                       gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+                       default-state = "keep";
+               };
+               /*
+                       power red is missing
+               */
+       };
+};
+
+&gpio {
+       pinctrl-names = "default";
+       pinctrl-0 = <&state_default>;
+
+       state_default: pinmux {
+               keys_in {
+                       lantiq,pins = "io0",/* "io25", */"io29";
+                       lantiq,pull = <2>;
+                       lantiq,open-drain = <1>;
+               };
+       };
+};
+
+&gsw {
+       phy-mode = "mii";
+       mac-address = [ 00 11 22 33 44 55 ];
+};
+
+&spi {
+       status = "okay";
+
+       flash@1 {
+               compatible = "jedec,spi-nor";
+               reg = <1>;
+               spi-max-frequency = <5000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               reg = <0x0 0x20000>;
+                               label = "SPI (RO) U-Boot Image";
+                               read-only;
+                       };
+
+                       partition@20000 {
+                               reg = <0x20000 0x10000>;
+                               label = "ENV_MAC";
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               reg = <0x30000 0x10000>;
+                               label = "DPF";
+                               read-only;
+                       };
+
+                       partition@40000 {
+                               reg = <0x40000 0x10000>;
+                               label = "NVRAM";
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               reg = <0x50000 0x3a0000>;
+                               label = "kernel";
+                       };
+               };
+       };
+};
+
+&usb_phy {
+       status = "okay";
+};
+
+&usb {
+       status = "okay";
+};