[lantiq] move files-3.3 -> files
[openwrt/svn-archive/archive.git] / target / linux / lantiq / files-3.3 / arch / mips / lantiq / xway / mach-fritz_vr9.c
diff --git a/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-fritz_vr9.c b/target/linux/lantiq/files-3.3/arch/mips/lantiq/xway/mach-fritz_vr9.c
deleted file mode 100644 (file)
index 293c7b7..0000000
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/input.h>
-#include <linux/phy.h>
-#include <linux/spi/spi_gpio.h>
-#include <linux/spi/flash.h>
-
-#include <lantiq_soc.h>
-#include <irq.h>
-
-#include "../machtypes.h"
-#include "devices.h"
-#include "dev-ifxhcd.h"
-#include "dev-gpio-leds.h"
-#include "dev-gpio-buttons.h"
-
-static struct mtd_partition fritz3370_partitions[] = {
-       {
-               .name   = "linux",
-               .offset = 0x0,
-               .size   = 0x400000,
-       },
-       {
-               .name   = "filesystem",
-               .offset = 0x400000,
-               .size   = 0x3000000,
-       },
-       {
-               .name   = "reserved-kernel",
-               .offset = 0x3400000,
-               .size   = 0x400000,
-       },
-       {
-               .name   = "reserved",
-               .offset = 0x3800000,
-               .size   = 0x3000000,
-       },
-       {
-               .name   = "config",
-               .offset = 0x6800000,
-               .size   = 0x200000,
-       },
-       {
-               .name   = "nand-filesystem",
-               .offset = 0x6a00000,
-               .size   = 0x1600000,
-       },
-};
-
-static struct mtd_partition spi_flash_partitions[] = {
-       {
-               .name   = "urlader",
-               .offset = 0x0,
-               .size   = 0x20000,
-       },
-       {
-               .name   = "tffs",
-               .offset = 0x20000,
-               .size   = 0x10000,
-       },
-       {
-               .name   = "tffs",
-               .offset = 0x30000,
-               .size   = 0x10000,
-       },
-};
-
-static struct gpio_led
-fritz3370_gpio_leds[] __initdata = {
-       { .name = "soc:green:1", .gpio = 32, .active_low = 1, .default_trigger = "default-on" },
-       { .name = "soc:red:2", .gpio = 33, .active_low = 1, .default_trigger = "default-on" },
-       { .name = "soc:red:3", .gpio = 34, .active_low = 1, .default_trigger = "default-on" },
-       { .name = "soc:green:4", .gpio = 35, .active_low = 1, .default_trigger = "default-on" },
-       { .name = "soc:green:5", .gpio = 36, .active_low = 1, .default_trigger = "default-on" },
-       { .name = "soc:green:6", .gpio = 47, .active_low = 1, .default_trigger = "default-on" },
-};
-
-static struct gpio_keys_button
-fritz3370_gpio_keys[] __initdata = {
-       {
-               .desc = "wifi",
-               .type = EV_KEY,
-               .code = BTN_0,
-               .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
-               .gpio = 29,
-               .active_low = 1,
-       },
-};
-
-static struct ltq_eth_data ltq_eth_data = {
-       .mii_mode       = PHY_INTERFACE_MODE_RMII,
-};
-
-static int usb_pins[2] = { 5, 14 };
-
-#define SPI_GPIO_MRST  16
-#define SPI_GPIO_MTSR  17
-#define SPI_GPIO_CLK   18
-#define SPI_GPIO_CS0   10
-
-static struct spi_gpio_platform_data spi_gpio_data = {
-       .sck            = SPI_GPIO_CLK,
-       .mosi           = SPI_GPIO_MTSR,
-       .miso           = SPI_GPIO_MRST,
-       .num_chipselect = 2,
-};
-
-static struct platform_device spi_gpio_device = {
-       .name                   = "spi_gpio",
-       .dev.platform_data      = &spi_gpio_data,
-};
-
-static struct flash_platform_data spi_flash_data = {
-       .name           = "SPL",
-       .parts          = spi_flash_partitions,
-       .nr_parts       = ARRAY_SIZE(spi_flash_partitions),
-};
-
-static struct spi_board_info spi_flash __initdata = {
-       .modalias               = "m25p80",
-       .bus_num                = 0,
-       .chip_select            = 0,
-       .max_speed_hz           = 10 * 1000 * 1000,
-       .mode                   = SPI_MODE_3,
-       .chip_select            = 0,
-       .controller_data        = (void *) SPI_GPIO_CS0,
-       .platform_data          = &spi_flash_data
-};
-
-static void __init
-spi_gpio_init(void)
-{
-       spi_register_board_info(&spi_flash, 1);
-       platform_device_register(&spi_gpio_device);
-}
-
-static void __init
-fritz3370_init(void)
-{
-       spi_gpio_init();
-       platform_device_register_simple("pcie-xway", 0, NULL, 0);
-       xway_register_nand(fritz3370_partitions, ARRAY_SIZE(fritz3370_partitions));
-       xway_register_hcd(usb_pins);
-       ltq_add_device_gpio_leds(-1, ARRAY_SIZE(fritz3370_gpio_leds), fritz3370_gpio_leds);
-       ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL,
-               ARRAY_SIZE(fritz3370_gpio_keys), fritz3370_gpio_keys);
-       ltq_register_vrx200(&ltq_eth_data);
-}
-
-MIPS_MACHINE(LANTIQ_MACH_FRITZ3370,
-                       "FRITZ3370",
-                       "FRITZ!BOX 3370",
-                       fritz3370_init);