[lantiq] cleanup basefiles
[openwrt/svn-archive/archive.git] / target / linux / lantiq / files-3.3 / arch / mips / lantiq / xway / mach-netgear.c
index f30478c0fd7b7db2acaffa7c05d8b988b9c4a871..bb28537bc0d71ce0514647f160739edbf4e08fab 100644 (file)
@@ -4,6 +4,7 @@
  *  by the Free Software Foundation.
  *
  *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ *  Copyright (C) 2012 Pieter Voorthuijsen <p.voorthuijsen@gmail.com>
  */
 
 #include <linux/init.h>
 #include <linux/phy.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/ath9k_platform.h>
+#include <linux/if_ether.h>
+#include <linux/etherdevice.h>
+#include <linux/kobject.h>
+#include <linux/sysfs.h>
+#include <linux/rtl8366.h>
 
 #include <lantiq_soc.h>
 #include <irq.h>
+#include <dev-gpio-leds.h>
+#include <dev-gpio-buttons.h>
+#include "dev-wifi-athxk.h"
 
 #include "../machtypes.h"
 #include "devices.h"
 #include "dev-dwc_otg.h"
+#include "pci-ath-fixup.h"
+#include <mtd/mtd-abi.h>
+#include <asm-generic/sizes.h>
+
+static struct mtd_partition dgn3500_partitions[] = {
+       {
+               .name = "u-boot",
+               .offset = 0,
+               .size = 0x10000,
+               .mask_flags = MTD_WRITEABLE,
+       },
+       {
+               .name = "environment",
+               .offset = 0x10000,
+               .size = 0x10000,
+               .mask_flags = MTD_WRITEABLE,
+       },
+       {
+               .name = "calibration",
+               .offset = 0x20000,
+               .size = 0x10000,
+               .mask_flags = MTD_WRITEABLE,
+       },
+       {
+               .name = "linux",
+               .offset = 0x50000,
+               .size = 0xfa0000,
+       },
+};
 
 static struct ltq_pci_data ltq_pci_data = {
        .clock  = PCI_CLOCK_INT,
@@ -35,51 +75,180 @@ static struct ltq_eth_data ltq_eth_data = {
        .mii_mode = PHY_INTERFACE_MODE_MII,
 };
 
-static struct mtd_partition easy98000_nor_partitions[] =
-{
-       {
-               .name   = "uboot",
-               .offset = 0x0,
-               .size   = 0x40000,
-       },
+static struct gpio_led
+dgn3500_gpio_leds[] __initdata = {
+       { .name = "soc:green:power", .gpio = 34, .active_low = 1, },
+       { .name = "soc:red:power", .gpio = 39, .active_low = 1, },
+       { .name = "soc:orange:wlan", .gpio = 51, .active_low = 1, },
+       { .name = "soc:green:wps", .gpio = 52, .active_low = 1, },
+       { .name = "soc:green:usb", .gpio = 22, .active_low = 1, },
+       { .name = "soc:green:dsl", .gpio = 4, .active_low = 1, },
+       { .name = "soc:green:internet", .gpio = 2, .active_low = 1, },
+};
+
+static struct gpio_keys_button
+dgn3500_gpio_keys[] __initdata = {
        {
-               .name   = "uboot_env",
-               .offset = 0x40000,
-               .size   = 0x40000,      /* 2 sectors for redundant env. */
+               .desc = "wps",
+               .type = EV_KEY,
+               .code = BTN_0,
+               .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
+               .gpio = 54,
+               .active_low = 1,
        },
        {
-               .name   = "linux",
-               .offset = 0x80000,
-               .size   = 0xF80000,     /* map only 16 MiB */
+               .desc = "reset",
+               .type = EV_KEY,
+               .code = BTN_1,
+               .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
+               .gpio = 36,
+               .active_low = 1,
        },
 };
 
-static struct flash_platform_data easy98000_spi_flash_platform_data = {
-       .name = "sflash",
-       .parts = easy98000_nor_partitions,
-       .nr_parts = ARRAY_SIZE(easy98000_nor_partitions)
+#define SPI_GPIO_MRST   16
+#define SPI_GPIO_MTSR   17
+#define SPI_GPIO_CLK    18
+#define SPI_GPIO_CS0    10
+
+static struct spi_gpio_platform_data spi_gpio_data = {
+       .sck            = SPI_GPIO_CLK,
+       .mosi           = SPI_GPIO_MTSR,
+       .miso           = SPI_GPIO_MRST,
+       .num_chipselect = 2,
+};
+
+static struct platform_device spi_gpio_device = {
+       .name                   = "spi_gpio",
+       .dev.platform_data      = &spi_gpio_data,
+};
+
+static struct flash_platform_data spi_flash_data = {
+       .name           = "sflash",
+       .parts          = dgn3500_partitions,
+       .nr_parts       = ARRAY_SIZE(dgn3500_partitions),
+};
+
+static struct spi_board_info spi_flash __initdata = {
+       .modalias               = "m25p80",
+       .bus_num                = 0,
+       .chip_select            = 0,
+       .max_speed_hz           = 10 * 1000 * 1000,
+       .mode                   = SPI_MODE_3,
+       .chip_select            = 0,
+       .controller_data        = (void *) SPI_GPIO_CS0,
+       .platform_data          = &spi_flash_data
 };
 
-static struct spi_board_info spi_info __initdata = {
-       .modalias               = "m25p80",
-       .bus_num                = 0,
-       .chip_select            = 3,
-       .max_speed_hz           = 10 * 1000 * 1000,
-       .mode                   = SPI_MODE_3,
-       .platform_data          = &easy98000_spi_flash_platform_data
+static u8 ltq_ethaddr[6] = { 0 };
+
+static int __init setup_ethaddr(char *str)
+{
+       if (!mac_pton(str, ltq_ethaddr))
+               memset(ltq_ethaddr, 0, 6);
+       return 0;
+}
+__setup("ethaddr=", setup_ethaddr);
+
+#define smi_SCK                37
+#define smi_SDA                35
+
+static struct rtl8366_platform_data rtl8366rb_data = {
+       .gpio_sda = smi_SDA,
+       .gpio_sck = smi_SCK,
 };
 
-struct ltq_spi_platform_data ltq_spi_data = {
-       .num_chipselect = 4,
+static struct platform_device rtl8366rb_device = {
+       .name = RTL8366RB_DRIVER_NAME,
+       .id = -1,
+       .dev = {
+               .platform_data  = &rtl8366rb_data,
+       }
+};
+
+static u16 dgn3500_eeprom_data[ATH9K_PLAT_EEP_MAX_WORDS] = {0};
+
+static ssize_t ath_eeprom_read(struct file *filp, struct kobject *kobj,
+               struct bin_attribute *attr, char *buf,
+               loff_t offset, size_t count)
+{
+       if (unlikely(offset >= sizeof(dgn3500_eeprom_data)))
+               return 0;
+       if ((offset + count) > sizeof(dgn3500_eeprom_data))
+               count = sizeof(dgn3500_eeprom_data) - offset;
+       if (unlikely(!count))
+               return count;
+
+       memcpy(buf, (char *)(dgn3500_eeprom_data) + offset, count);
+
+       return count;
+}
+
+extern struct ath9k_platform_data ath9k_pdata;
+
+static ssize_t ath_eeprom_write(struct file *filp, struct kobject *kobj,
+               struct bin_attribute *attr, char *buf,
+               loff_t offset, size_t count)
+{
+       int i;
+       char *eeprom_bytes = (char *)dgn3500_eeprom_data;
+
+       if (unlikely(offset >= sizeof(dgn3500_eeprom_data)))
+               return -EFBIG;
+       if ((offset + count) > sizeof(dgn3500_eeprom_data))
+               count = sizeof(dgn3500_eeprom_data) - offset;
+       if (unlikely(!count))
+               return count;
+       if (count % 2)
+               return 0;
+
+       /* The PCI fixup routine requires an endian swap of the calibartion data
+        * stored in flash */
+       for (i = 0; i < count; i += 2) {
+               eeprom_bytes[offset + i + 1] = buf[i];
+               eeprom_bytes[offset + i] = buf[i+1];
+       }
+
+       /* The original data does not contain a checksum. Set the country and
+        * calculate new checksum when all data is received */
+       if ((count + offset) == sizeof(dgn3500_eeprom_data))
+               memcpy(ath9k_pdata.eeprom_data, dgn3500_eeprom_data,
+                               sizeof(ath9k_pdata.eeprom_data));
+
+       return count;
+}
+
+static struct bin_attribute dev_attr_ath_eeprom = {
+       .attr = {
+               .name = "ath_eeprom",
+               .mode = S_IRUGO|S_IWUSR,
+       },
+       .read = ath_eeprom_read,
+       .write = ath_eeprom_write,
 };
 
 static void __init dgn3500_init(void)
 {
+       if (sysfs_create_bin_file(firmware_kobj, &dev_attr_ath_eeprom))
+               printk(KERN_INFO "Failed to create ath eeprom sysfs entry\n");
+       ltq_add_device_gpio_leds(-1, ARRAY_SIZE(dgn3500_gpio_leds),
+                       dgn3500_gpio_leds);
+       ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL,
+                       ARRAY_SIZE(dgn3500_gpio_keys), dgn3500_gpio_keys);
+       platform_device_register(&spi_gpio_device);
        ltq_register_pci(&ltq_pci_data);
+       spi_register_board_info(&spi_flash, 1);
+       if (!is_valid_ether_addr(ltq_ethaddr)) {
+               printk(KERN_INFO "MAC invalid using random\n");
+               random_ether_addr(ltq_ethaddr);
+       }
+       memcpy(&ltq_eth_data.mac.sa_data, ltq_ethaddr, 6);
        ltq_register_etop(&ltq_eth_data);
-       ltq_register_spi(&ltq_spi_data, &spi_info, 1);
+       ltq_register_ath9k(dgn3500_eeprom_data, ltq_ethaddr);
+       ltq_pci_ath_fixup(14, dgn3500_eeprom_data);
        /* The usb power is always enabled, protected by a fuse */
        xway_register_dwc(-1);
+       platform_device_register(&rtl8366rb_device);
 }
 
 MIPS_MACHINE(LANTIQ_MACH_DGN3500B,