--- /dev/null
+From cbacf87fa6fb262c98033405f15697798c3a9c5d Mon Sep 17 00:00:00 2001
+From: Zhao Qiang <qiang.zhao@nxp.com>
+Date: Sun, 9 Oct 2016 14:31:50 +0800
+Subject: [PATCH 135/141] arm64: Add DTS support for FSL's LS1088ARDB
+
+Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
+---
+ arch/arm64/boot/dts/freescale/Makefile | 1 +
+ arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 203 ++++++++
+ arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 557 +++++++++++++++++++++
+ 3 files changed, 761 insertions(+)
+ create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
+ create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+
+--- a/arch/arm64/boot/dts/freescale/Makefile
++++ b/arch/arm64/boot/dts/freescale/Makefile
+@@ -5,6 +5,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1
+ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb
+ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb
+ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb
++dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-rdb.dtb
+
+ always := $(dtb-y)
+ subdir-y := $(dts-dirs)
+--- /dev/null
++++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
+@@ -0,0 +1,203 @@
++/*
++ * Device Tree file for Freescale LS1088a RDB board
++ *
++ * Copyright (C) 2015, Freescale Semiconductor
++ *
++ * This file is licensed under the terms of the GNU General Public
++ * License version 2. This program is licensed "as is" without any
++ * warranty of any kind, whether express or implied.
++ */
++
++/dts-v1/;
++
++#include "fsl-ls1088a.dtsi"
++
++/ {
++ model = "Freescale Layerscape 1088a RDB Board";
++ compatible = "fsl,ls1088a-rdb", "fsl,ls1088a";
++};
++
++&esdhc {
++ status = "okay";
++};
++
++&ifc {
++ status = "disabled";
++};
++
++&ftm0 {
++ status = "okay";
++};
++
++&i2c0 {
++ status = "okay";
++ pca9547@77 {
++ compatible = "philips,pca9547";
++ reg = <0x77>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ i2c@2 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0x2>;
++
++ ina220@40 {
++ compatible = "ti,ina220";
++ reg = <0x40>;
++ shunt-resistor = <1000>;
++ };
++ };
++
++ i2c@3 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0x3>;
++
++ rtc@51 {
++ compatible = "nxp,pcf2129";
++ reg = <0x51>;
++ /* IRQ10_B */
++ interrupts = <0 150 0x4>;
++ };
++
++ adt7461a@4c {
++ compatible = "adt7461a";
++ reg = <0x4c>;
++ };
++ };
++ };
++};
++
++&i2c1 {
++ status = "disabled";
++};
++
++&i2c2 {
++ status = "disabled";
++};
++
++&i2c3 {
++ status = "disabled";
++};
++
++&dspi {
++ status = "disabled";
++};
++
++&qspi {
++ status = "okay";
++ qflash0: s25fs512s@0 {
++ compatible = "spansion,m25p80";
++ #address-cells = <1>;
++ #size-cells = <1>;
++ spi-max-frequency = <20000000>;
++ reg = <0>;
++ };
++
++ qflash1: s25fs512s@1 {
++ compatible = "spansion,m25p80";
++ #address-cells = <1>;
++ #size-cells = <1>;
++ spi-max-frequency = <20000000>;
++ reg = <1>;
++ };
++};
++
++&sata0 {
++ status = "okay";
++};
++
++&usb0 {
++ status = "okay";
++};
++
++&usb1 {
++ status = "okay";
++};
++
++&serial0 {
++ status = "okay";
++};
++
++&serial1 {
++ status = "okay";
++};
++
++&emdio1 {
++ /* Freescale F104 PHY1 */
++ mdio1_phy1: emdio1_phy@1 {
++ reg = <0x1c>;
++ phy-connection-type = "qsgmii";
++ };
++ mdio1_phy2: emdio1_phy@2 {
++ reg = <0x1d>;
++ phy-connection-type = "qsgmii";
++ };
++ mdio1_phy3: emdio1_phy@3 {
++ reg = <0x1e>;
++ phy-connection-type = "qsgmii";
++ };
++ mdio1_phy4: emdio1_phy@4 {
++ reg = <0x1f>;
++ phy-connection-type = "qsgmii";
++ };
++ /* F104 PHY2 */
++ mdio1_phy5: emdio1_phy@5 {
++ reg = <0x0c>;
++ phy-connection-type = "qsgmii";
++ };
++ mdio1_phy6: emdio1_phy@6 {
++ reg = <0x0d>;
++ phy-connection-type = "qsgmii";
++ };
++ mdio1_phy7: emdio1_phy@7 {
++ reg = <0x0e>;
++ phy-connection-type = "qsgmii";
++ };
++ mdio1_phy8: emdio1_phy@8 {
++ reg = <0x0f>;
++ phy-connection-type = "qsgmii";
++ };
++};
++
++&emdio2 {
++ /* Aquantia AQR105 10G PHY */
++ mdio2_phy1: emdio2_phy@1 {
++ compatible = "ethernet-phy-ieee802.3-c45";
++ reg = <0x0>;
++ phy-connection-type = "xfi";
++ };
++};
++
++/* DPMAC connections to external PHYs
++ * based on LS1088A RM RevC - $24.1.2 SerDes Options
++ */
++/* DPMAC1 is 10G SFP+, fixed link */
++&dpmac2 {
++ phy-handle = <&mdio2_phy1>;
++};
++&dpmac3 {
++ phy-handle = <&mdio1_phy5>;
++};
++&dpmac4 {
++ phy-handle = <&mdio1_phy6>;
++};
++&dpmac5 {
++ phy-handle = <&mdio1_phy7>;
++};
++&dpmac6 {
++ phy-handle = <&mdio1_phy8>;
++};
++&dpmac7 {
++ phy-handle = <&mdio1_phy1>;
++};
++&dpmac8 {
++ phy-handle = <&mdio1_phy2>;
++};
++&dpmac9 {
++ phy-handle = <&mdio1_phy3>;
++};
++&dpmac10 {
++ phy-handle = <&mdio1_phy4>;
++};
+--- /dev/null
++++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+@@ -0,0 +1,557 @@
++/*
++ * Device Tree Include file for Freescale Layerscape-1088A family SoC.
++ *
++ * Copyright (C) 2015, Freescale Semiconductor
++ *
++ */
++
++/memreserve/ 0x80000000 0x00010000;
++
++/ {
++ compatible = "fsl,ls1088a";
++ interrupt-parent = <&gic>;
++ #address-cells = <2>;
++ #size-cells = <2>;
++
++ cpus {
++ #address-cells = <2>;
++ #size-cells = <0>;
++
++ /* We have 2 clusters having 4 Cortex-A57 cores each */
++ cpu0: cpu@0 {
++ device_type = "cpu";
++ compatible = "arm,cortex-a53";
++ reg = <0x0 0x0>;
++ clocks = <&clockgen 1 0>;
++ };
++
++ cpu1: cpu@1 {
++ device_type = "cpu";
++ compatible = "arm,cortex-a53";
++ reg = <0x0 0x1>;
++ clocks = <&clockgen 1 0>;
++ };
++
++ cpu2: cpu@2 {
++ device_type = "cpu";
++ compatible = "arm,cortex-a53";
++ reg = <0x0 0x2>;
++ clocks = <&clockgen 1 0>;
++ };
++
++ cpu3: cpu@3 {
++ device_type = "cpu";
++ compatible = "arm,cortex-a53";
++ reg = <0x0 0x3>;
++ clocks = <&clockgen 1 0>;
++ };
++
++ cpu4: cpu@100 {
++ device_type = "cpu";
++ compatible = "arm,cortex-a53";
++ reg = <0x0 0x100>;
++ clocks = <&clockgen 1 1>;
++ };
++
++ cpu5: cpu@101 {
++ device_type = "cpu";
++ compatible = "arm,cortex-a53";
++ reg = <0x0 0x101>;
++ clocks = <&clockgen 1 1>;
++ };
++
++ cpu6: cpu@102 {
++ device_type = "cpu";
++ compatible = "arm,cortex-a53";
++ reg = <0x0 0x102>;
++ clocks = <&clockgen 1 1>;
++ };
++
++ cpu7: cpu@103 {
++ device_type = "cpu";
++ compatible = "arm,cortex-a53";
++ reg = <0x0 0x103>;
++ clocks = <&clockgen 1 1>;
++ };
++ };
++
++ pmu {
++ compatible = "arm,armv8-pmuv3";
++ interrupts = <1 7 0x8>; /* PMU PPI, Level low type */
++ };
++
++ gic: interrupt-controller@6000000 {
++ compatible = "arm,gic-v3";
++ reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
++ <0x0 0x06100000 0 0x100000>, /* GICR(RD_base+SGI_base)*/
++ <0x0 0x0c0c0000 0 0x2000>, /* GICC */
++ <0x0 0x0c0d0000 0 0x1000>, /* GICH */
++ <0x0 0x0c0e0000 0 0x20000>; /* GICV */
++ #interrupt-cells = <3>;
++ #address-cells = <2>;
++ #size-cells = <2>;
++ ranges;
++ interrupt-controller;
++ interrupts = <1 9 0x4>;
++
++ its: gic-its@6020000 {
++ compatible = "arm,gic-v3-its";
++ msi-controller;
++ reg = <0x0 0x6020000 0 0x20000>;
++ };
++ };
++
++ sysclk: sysclk {
++ compatible = "fixed-clock";
++ #clock-cells = <0>;
++ clock-frequency = <100000000>;
++ clock-output-names = "sysclk";
++ };
++
++ clockgen: clocking@1300000 {
++ compatible = "fsl,ls2080a-clockgen", "fsl,ls1088a-clockgen";
++ reg = <0 0x1300000 0 0xa0000>;
++ #clock-cells = <2>;
++ clocks = <&sysclk>;
++ };
++
++ serial0: serial@21c0500 {
++ device_type = "serial";
++ compatible = "fsl,ns16550", "ns16550a";
++ reg = <0x0 0x21c0500 0x0 0x100>;
++ clocks = <&clockgen 4 3>;
++ interrupts = <0 32 0x4>; /* Level high type */
++ };
++
++ serial1: serial@21c0600 {
++ device_type = "serial";
++ compatible = "fsl,ns16550", "ns16550a";
++ reg = <0x0 0x21c0600 0x0 0x100>;
++ clocks = <&clockgen 4 3>;
++ interrupts = <0 32 0x4>; /* Level high type */
++ };
++
++ gpio0: gpio@2300000 {
++ compatible = "fsl,qoriq-gpio";
++ reg = <0x0 0x2300000 0x0 0x10000>;
++ interrupts = <0 36 0x4>; /* Level high type */
++ gpio-controller;
++ little-endian;
++ #gpio-cells = <2>;
++ interrupt-controller;
++ #interrupt-cells = <2>;
++ };
++
++ gpio1: gpio@2310000 {
++ compatible = "fsl,qoriq-gpio";
++ reg = <0x0 0x2310000 0x0 0x10000>;
++ interrupts = <0 36 0x4>; /* Level high type */
++ gpio-controller;
++ little-endian;
++ #gpio-cells = <2>;
++ interrupt-controller;
++ #interrupt-cells = <2>;
++ };
++
++ gpio2: gpio@2320000 {
++ compatible = "fsl,qoriq-gpio";
++ reg = <0x0 0x2320000 0x0 0x10000>;
++ interrupts = <0 37 0x4>; /* Level high type */
++ gpio-controller;
++ little-endian;
++ #gpio-cells = <2>;
++ interrupt-controller;
++ #interrupt-cells = <2>;
++ };
++
++ gpio3: gpio@2330000 {
++ compatible = "fsl,qoriq-gpio";
++ reg = <0x0 0x2330000 0x0 0x10000>;
++ interrupts = <0 37 0x4>; /* Level high type */
++ gpio-controller;
++ little-endian;
++ #gpio-cells = <2>;
++ interrupt-controller;
++ #interrupt-cells = <2>;
++ };
++
++ /* TODO: WRIOP (CCSR?) */
++ emdio1: mdio@0x8B96000 { /* WRIOP0: 0x8B8_0000, E-MDIO1: 0x1_6000 */
++ compatible = "fsl,fman-memac-mdio";
++ reg = <0x0 0x8B96000 0x0 0x1000>;
++ device_type = "mdio";
++ little-endian; /* force the driver in LE mode */
++
++ /* Not necessary on the QDS, but needed on the RDB */
++ #address-cells = <1>;
++ #size-cells = <0>;
++ };
++
++ emdio2: mdio@0x8B97000 { /* WRIOP0: 0x8B8_0000, E-MDIO2: 0x1_7000 */
++ compatible = "fsl,fman-memac-mdio";
++ reg = <0x0 0x8B97000 0x0 0x1000>;
++ device_type = "mdio";
++ little-endian; /* force the driver in LE mode */
++
++ #address-cells = <1>;
++ #size-cells = <0>;
++ };
++
++ ifc: ifc@2240000 {
++ compatible = "fsl,ifc", "simple-bus";
++ reg = <0x0 0x2240000 0x0 0x20000>;
++ interrupts = <0 21 0x4>; /* Level high type */
++ little-endian;
++ #address-cells = <2>;
++ #size-cells = <1>;
++
++ ranges = <0 0 0x5 0x80000000 0x08000000
++ 2 0 0x5 0x30000000 0x00010000
++ 3 0 0x5 0x20000000 0x00010000>;
++ };
++
++ esdhc: esdhc@2140000 {
++ compatible = "fsl,ls2080a-esdhc", "fsl,ls1088a-esdhc", "fsl,esdhc";
++ reg = <0x0 0x2140000 0x0 0x10000>;
++ interrupts = <0 28 0x4>; /* Level high type */
++ clock-frequency = <0>;
++ voltage-ranges = <1800 1800 3300 3300>;
++ sdhci,auto-cmd12;
++ little-endian;
++ bus-width = <4>;
++ };
++
++ ftm0: ftm0@2800000 {
++ compatible = "fsl,ftm-alarm";
++ reg = <0x0 0x2800000 0x0 0x10000>;
++ interrupts = <0 44 4>;
++ };
++
++ reset: reset@1E60000 {
++ compatible = "fsl,ls-reset";
++ reg = <0x0 0x1E60000 0x0 0x10000>;
++ };
++
++ dspi: dspi@2100000 {
++ compatible = "fsl,ls2085a-dspi", "fsl,ls1088a-dspi";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0x0 0x2100000 0x0 0x10000>;
++ interrupts = <0 26 0x4>; /* Level high type */
++ clocks = <&clockgen 4 3>;
++ clock-names = "dspi";
++ spi-num-chipselects = <5>;
++ bus-num = <0>;
++ };
++
++ i2c0: i2c@2000000 {
++ compatible = "fsl,vf610-i2c";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0x0 0x2000000 0x0 0x10000>;
++ interrupts = <0 34 0x4>; /* Level high type */
++ clock-names = "i2c";
++ clocks = <&clockgen 4 3>;
++ };
++
++ i2c1: i2c@2010000 {
++ compatible = "fsl,vf610-i2c";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0x0 0x2010000 0x0 0x10000>;
++ interrupts = <0 34 0x4>; /* Level high type */
++ clock-names = "i2c";
++ clocks = <&clockgen 4 3>;
++ };
++
++ i2c2: i2c@2020000 {
++ compatible = "fsl,vf610-i2c";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0x0 0x2020000 0x0 0x10000>;
++ interrupts = <0 35 0x4>; /* Level high type */
++ clock-names = "i2c";
++ clocks = <&clockgen 4 3>;
++ };
++
++ i2c3: i2c@2030000 {
++ compatible = "fsl,vf610-i2c";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0x0 0x2030000 0x0 0x10000>;
++ interrupts = <0 35 0x4>; /* Level high type */
++ clock-names = "i2c";
++ clocks = <&clockgen 4 3>;
++ };
++
++ qspi: quadspi@20c0000 {
++ compatible = "fsl,ls2080a-qspi", "fsl,ls1088a-qspi";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0x0 0x20c0000 0x0 0x10000>,
++ <0x0 0x20000000 0x0 0x10000000>;
++ reg-names = "QuadSPI", "QuadSPI-memory";
++ interrupts = <0 25 0x4>; /* Level high type */
++ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
++ clock-names = "qspi_en", "qspi";
++ };
++
++ pcie@3400000 {
++ compatible = "fsl,ls1088a-pcie", "snps,dw-pcie";
++ reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
++ 0x20 0x00000000 0x0 0x00002000>; /* configuration space */
++ reg-names = "regs", "config";
++ interrupts = <0 108 0x4>; /* aer interrupt */
++ interrupt-names = "aer";
++ #address-cells = <3>;
++ #size-cells = <2>;
++ device_type = "pci";
++ dma-coherent;
++ num-lanes = <4>;
++ bus-range = <0x0 0xff>;
++ ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000 /* downstream I/O */
++ 0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
++ msi-parent = <&its>;
++ #interrupt-cells = <1>;
++ interrupt-map-mask = <0 0 0 7>;
++ interrupt-map = <0000 0 0 1 &gic 0 0 0 109 4>,
++ <0000 0 0 2 &gic 0 0 0 110 4>,
++ <0000 0 0 3 &gic 0 0 0 111 4>,
++ <0000 0 0 4 &gic 0 0 0 112 4>;
++ };
++ pcie@3500000 {
++ compatible = "fsl,ls1088a-pcie", "snps,dw-pcie";
++ reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
++ 0x28 0x00000000 0x0 0x00002000>; /* configuration space */
++ reg-names = "regs", "config";
++ interrupts = <0 113 0x4>; /* aer interrupt */
++ interrupt-names = "aer";
++ #address-cells = <3>;
++ #size-cells = <2>;
++ device_type = "pci";
++ dma-coherent;
++ num-lanes = <4>;
++ bus-range = <0x0 0xff>;
++ ranges = <0x81000000 0x0 0x00000000 0x28 0x00010000 0x0 0x00010000 /* downstream I/O */
++ 0x82000000 0x0 0x40000000 0x28 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
++ msi-parent = <&its>;
++ #interrupt-cells = <1>;
++ interrupt-map-mask = <0 0 0 7>;
++ interrupt-map = <0000 0 0 1 &gic 0 0 0 114 4>,
++ <0000 0 0 2 &gic 0 0 0 115 4>,
++ <0000 0 0 3 &gic 0 0 0 116 4>,
++ <0000 0 0 4 &gic 0 0 0 117 4>;
++ };
++
++ pcie@3600000 {
++ compatible = "fsl,ls1088a-pcie", "snps,dw-pcie";
++ reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
++ 0x30 0x00000000 0x0 0x00002000>; /* configuration space */
++ reg-names = "regs", "config";
++ interrupts = <0 118 0x4>; /* aer interrupt */
++ interrupt-names = "aer";
++ #address-cells = <3>;
++ #size-cells = <2>;
++ device_type = "pci";
++ dma-coherent;
++ num-lanes = <8>;
++ bus-range = <0x0 0xff>;
++ ranges = <0x81000000 0x0 0x00000000 0x30 0x00010000 0x0 0x00010000 /* downstream I/O */
++ 0x82000000 0x0 0x40000000 0x30 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
++ msi-parent = <&its>;
++ #interrupt-cells = <1>;
++ interrupt-map-mask = <0 0 0 7>;
++ interrupt-map = <0000 0 0 1 &gic 0 0 0 119 4>,
++ <0000 0 0 2 &gic 0 0 0 120 4>,
++ <0000 0 0 3 &gic 0 0 0 121 4>,
++ <0000 0 0 4 &gic 0 0 0 122 4>;
++ };
++
++ sata0: sata@3200000 {
++ compatible = "fsl,ls1088a-ahci", "fsl,ls1043a-ahci";
++ reg = <0x0 0x3200000 0x0 0x10000>;
++ interrupts = <0 133 0x4>; /* Level high type */
++ clocks = <&clockgen 4 3>;
++ };
++
++ usb0: usb3@3100000 {
++ compatible = "snps,dwc3";
++ reg = <0x0 0x3100000 0x0 0x10000>;
++ interrupts = <0 80 0x4>; /* Level high type */
++ dr_mode = "host";
++ configure-gfladj;
++ snps,dis_rxdet_inp3_quirk;
++ };
++
++ usb1: usb3@3110000 {
++ compatible = "snps,dwc3";
++ reg = <0x0 0x3110000 0x0 0x10000>;
++ interrupts = <0 81 0x4>; /* Level high type */
++ dr_mode = "host";
++ configure-gfladj;
++ snps,dis_rxdet_inp3_quirk;
++ };
++
++ smmu: iommu@5000000 {
++ compatible = "arm,mmu-500";
++ reg = <0 0x5000000 0 0x800000>;
++ #global-interrupts = <12>;
++ interrupts = <0 13 4>, /* global secure fault */
++ <0 14 4>, /* combined secure interrupt */
++ <0 15 4>, /* global non-secure fault */
++ <0 16 4>, /* combined non-secure interrupt */
++ /* performance counter interrupts 0-7 */
++ <0 211 4>,
++ <0 212 4>,
++ <0 213 4>,
++ <0 214 4>,
++ <0 215 4>,
++ <0 216 4>,
++ <0 217 4>,
++ <0 218 4>,
++ /* per context interrupt, 64 interrupts */
++ <0 146 4>,
++ <0 147 4>,
++ <0 148 4>,
++ <0 149 4>,
++ <0 150 4>,
++ <0 151 4>,
++ <0 152 4>,
++ <0 153 4>,
++ <0 154 4>,
++ <0 155 4>,
++ <0 156 4>,
++ <0 157 4>,
++ <0 158 4>,
++ <0 159 4>,
++ <0 160 4>,
++ <0 161 4>,
++ <0 162 4>,
++ <0 163 4>,
++ <0 164 4>,
++ <0 165 4>,
++ <0 166 4>,
++ <0 167 4>,
++ <0 168 4>,
++ <0 169 4>,
++ <0 170 4>,
++ <0 171 4>,
++ <0 172 4>,
++ <0 173 4>,
++ <0 174 4>,
++ <0 175 4>,
++ <0 176 4>,
++ <0 177 4>,
++ <0 178 4>,
++ <0 179 4>,
++ <0 180 4>,
++ <0 181 4>,
++ <0 182 4>,
++ <0 183 4>,
++ <0 184 4>,
++ <0 185 4>,
++ <0 186 4>,
++ <0 187 4>,
++ <0 188 4>,
++ <0 189 4>,
++ <0 190 4>,
++ <0 191 4>,
++ <0 192 4>,
++ <0 193 4>,
++ <0 194 4>,
++ <0 195 4>,
++ <0 196 4>,
++ <0 197 4>,
++ <0 198 4>,
++ <0 199 4>,
++ <0 200 4>,
++ <0 201 4>,
++ <0 202 4>,
++ <0 203 4>,
++ <0 204 4>,
++ <0 205 4>,
++ <0 206 4>,
++ <0 207 4>,
++ <0 208 4>,
++ <0 209 4>;
++ mmu-masters = <&fsl_mc 0x300 0>;
++ };
++
++ timer {
++ compatible = "arm,armv8-timer";
++ interrupts = <1 13 0x1>,/*Phy Secure PPI, edge triggered*/
++ <1 14 0x1>, /*Phy Non-Secure PPI, edge triggered*/
++ <1 11 0x1>, /*Virtual PPI, edge triggered */
++ <1 10 0x1>; /*Hypervisor PPI, edge triggered */
++ };
++
++ fsl_mc: fsl-mc@80c000000 {
++ compatible = "fsl,qoriq-mc";
++ #stream-id-cells = <2>;
++ reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */
++ <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
++ msi-parent = <&its>;
++ #address-cells = <3>;
++ #size-cells = <1>;
++
++ /*
++ * Region type 0x0 - MC portals
++ * Region type 0x1 - QBMAN portals
++ */
++ ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000
++ 0x1 0x0 0x0 0x8 0x18000000 0x8000000>;
++
++ dpmacs {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ dpmac1: dpmac@1 {
++ compatible = "fsl,qoriq-mc-dpmac";
++ reg = <1>;
++ };
++ dpmac2: dpmac@2 {
++ compatible = "fsl,qoriq-mc-dpmac";
++ reg = <2>;
++ };
++ dpmac3: dpmac@3 {
++ compatible = "fsl,qoriq-mc-dpmac";
++ reg = <3>;
++ };
++ dpmac4: dpmac@4 {
++ compatible = "fsl,qoriq-mc-dpmac";
++ reg = <4>;
++ };
++ dpmac5: dpmac@5 {
++ compatible = "fsl,qoriq-mc-dpmac";
++ reg = <5>;
++ };
++ dpmac6: dpmac@6 {
++ compatible = "fsl,qoriq-mc-dpmac";
++ reg = <6>;
++ };
++ dpmac7: dpmac@7 {
++ compatible = "fsl,qoriq-mc-dpmac";
++ reg = <7>;
++ };
++ dpmac8: dpmac@8 {
++ compatible = "fsl,qoriq-mc-dpmac";
++ reg = <8>;
++ };
++ dpmac9: dpmac@9 {
++ compatible = "fsl,qoriq-mc-dpmac";
++ reg = <9>;
++ };
++ dpmac10: dpmac@10 {
++ compatible = "fsl,qoriq-mc-dpmac";
++ reg = <0xa>;
++ };
++ };
++ };
++
++
++ memory@80000000 {
++ device_type = "memory";
++ reg = <0x00000000 0x80000000 0 0x80000000>;
++ /* DRAM space 1 - 2 GB DRAM */
++ };
++};
projects / openwrt / staging / yousong.git / blobdiff