--- /dev/null
+From 45ba5bb2bdc9462fe5998aeb75e2c7e33b56c9fb Mon Sep 17 00:00:00 2001
+From: Zhao Qiang <qiang.zhao@nxp.com>
+Date: Mon, 7 Nov 2016 10:23:52 +0800
+Subject: [PATCH 227/238] ls2088a/dts: add ls2088a dts
+
+Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
+---
+ arch/arm64/boot/dts/freescale/Makefile | 2 +
+ arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts | 241 ++++++
+ arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts | 207 +++++
+ arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi | 854 +++++++++++++++++++++
+ 4 files changed, 1304 insertions(+)
+ create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts
+ create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
+ create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
+
+diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
+index b599645..e6c2a9f 100644
+--- a/arch/arm64/boot/dts/freescale/Makefile
++++ b/arch/arm64/boot/dts/freescale/Makefile
+@@ -6,6 +6,8 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb
+ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb
+ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb
+ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-rdb.dtb
++dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb
++dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb
+
+ always := $(dtb-y)
+ subdir-y := $(dts-dirs)
+diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts
+new file mode 100644
+index 0000000..04d3726
+--- /dev/null
++++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts
+@@ -0,0 +1,241 @@
++/*
++ * Device Tree file for Freescale LS2080a QDS Board
++ *
++ * Copyright (C) 2016, Freescale Semiconductor
++ *
++ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
++ *
++ * This file is licensed under the terms of the GNU General Public
++ * License version 2. This program is licensed "as is" without any
++ * warranty of any kind, whether express or implied.
++ */
++
++/dts-v1/;
++
++#include "fsl-ls2088a.dtsi"
++
++/ {
++ model = "Freescale Layerscape 2088a QDS Board";
++ compatible = "fsl,ls2088a-qds", "fsl,ls2088a";
++};
++
++&esdhc {
++ status = "okay";
++};
++
++&ifc {
++ status = "okay";
++ #address-cells = <2>;
++ #size-cells = <1>;
++ ranges = <0x0 0x0 0x5 0x80000000 0x08000000
++ 0x2 0x0 0x5 0x30000000 0x00010000
++ 0x3 0x0 0x5 0x20000000 0x00010000>;
++
++ nor@0,0 {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ compatible = "cfi-flash";
++ reg = <0x0 0x0 0x8000000>;
++ bank-width = <2>;
++ device-width = <1>;
++ };
++
++ nand@2,0 {
++ compatible = "fsl,ifc-nand";
++ reg = <0x2 0x0 0x10000>;
++ };
++
++ cpld@3,0 {
++ reg = <0x3 0x0 0x10000>;
++ compatible = "fsl,ls2088a-qds-qixis", "fsl,ls2080a-qds-qixis",
++ "fsl,fpga-qixis";
++ };
++};
++
++&ftm0 {
++ status = "okay";
++};
++
++&i2c0 {
++ status = "okay";
++ pca9547@77 {
++ compatible = "nxp,pca9547";
++ reg = <0x77>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++ i2c@0 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0x00>;
++ rtc@68 {
++ compatible = "dallas,ds3232";
++ reg = <0x68>;
++ };
++ };
++
++ i2c@2 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0x02>;
++
++ ina220@40 {
++ compatible = "ti,ina220";
++ reg = <0x40>;
++ shunt-resistor = <500>;
++ };
++ ina220@41 {
++ compatible = "ti,ina220";
++ reg = <0x41>;
++ shunt-resistor = <1000>;
++ };
++ };
++
++ i2c@3 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0x3>;
++
++ adt7481@4c {
++ compatible = "adi,adt7461";
++ reg = <0x4c>;
++ };
++ };
++ };
++};
++
++&i2c1 {
++ status = "disabled";
++};
++
++&i2c2 {
++ status = "disabled";
++};
++
++&i2c3 {
++ status = "disabled";
++};
++
++&dspi {
++ status = "okay";
++ dflash0: n25q128a {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ compatible = "st,m25p80";
++ spi-max-frequency = <3000000>;
++ reg = <0>;
++ };
++ dflash1: sst25wf040b {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ compatible = "st,m25p80";
++ spi-max-frequency = <3000000>;
++ reg = <1>;
++ };
++ dflash2: en25s64 {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ compatible = "st,m25p80";
++ spi-max-frequency = <3000000>;
++ reg = <2>;
++ };
++};
++
++&qspi {
++ status = "okay";
++ qflash0: s25fs256s1@0 {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ compatible = "st,m25p80";
++ spi-max-frequency = <20000000>;
++ m25p,fast-read;
++ reg = <0>;
++ };
++
++ qflash2: s25fs256s1@2 {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ compatible = "st,m25p80";
++ spi-max-frequency = <20000000>;
++ m25p,fast-read;
++ reg = <2>;
++ };
++};
++
++&sata0 {
++ status = "okay";
++};
++
++&sata1 {
++ status = "okay";
++};
++
++&usb0 {
++ status = "okay";
++};
++
++&usb1 {
++ status = "okay";
++};
++
++&ifc {
++ boardctrl: board-control@3,0 {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ compatible = "fsl,tetra-fpga", "fsl,fpga-qixis", "simple-bus";
++ reg = <3 0 0x300>; /* TODO check address */
++ ranges = <0 3 0 0x300>;
++
++ mdio_mux_emi1 {
++ compatible = "mdio-mux-mmioreg", "mdio-mux";
++ mdio-parent-bus = <&emdio1>;
++ reg = <0x54 1>; /* BRDCFG4 */
++ mux-mask = <0xe0>; /* EMI1_MDIO */
++
++ #address-cells=<1>;
++ #size-cells = <0>;
++
++ /* Child MDIO buses, one for each riser card:
++ reg = 0x0, 0x20, 0x40, 0x60, 0x80, 0xa0.
++
++ VSC8234 PHYs on the riser cards.
++ */
++
++ mdio_mux3: mdio@60 {
++ reg = <0x60>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ mdio0_phy12: mdio_phy0@1c {
++ reg = <0x1c>;
++ phy-connection-type = "sgmii";
++ };
++ mdio0_phy13: mdio_phy1@1d {
++ reg = <0x1d>;
++ phy-connection-type = "sgmii";
++ };
++ mdio0_phy14: mdio_phy2@1e {
++ reg = <0x1e>;
++ phy-connection-type = "sgmii";
++ };
++ mdio0_phy15: mdio_phy3@1f {
++ reg = <0x1f>;
++ phy-connection-type = "sgmii";
++ };
++ };
++ };
++ };
++};
++
++/* Update DPMAC connections to external PHYs, under SerDes 0x2a_0x49. */
++&dpmac9 {
++ phy-handle = <&mdio0_phy12>;
++};
++&dpmac10 {
++ phy-handle = <&mdio0_phy13>;
++};
++&dpmac11 {
++ phy-handle = <&mdio0_phy14>;
++};
++&dpmac12 {
++ phy-handle = <&mdio0_phy15>;
++};
+diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
+new file mode 100644
+index 0000000..ce553fb
+--- /dev/null
++++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
+@@ -0,0 +1,207 @@
++/*
++ * Device Tree file for Freescale LS2080a RDB board
++ *
++ * Copyright (C) 2015, Freescale Semiconductor
++ *
++ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
++ *
++ * This file is licensed under the terms of the GNU General Public
++ * License version 2. This program is licensed "as is" without any
++ * warranty of any kind, whether express or implied.
++ */
++
++/dts-v1/;
++
++#include "fsl-ls2088a.dtsi"
++
++/ {
++ model = "Freescale Layerscape 2088a RDB Board";
++ compatible = "fsl,ls2088a-rdb", "fsl,ls2088a";
++};
++
++&esdhc {
++ status = "okay";
++};
++
++&ifc {
++ status = "okay";
++ #address-cells = <2>;
++ #size-cells = <1>;
++ ranges = <0x0 0x0 0x5 0x80000000 0x08000000
++ 0x2 0x0 0x5 0x30000000 0x00010000
++ 0x3 0x0 0x5 0x20000000 0x00010000>;
++
++ nor@0,0 {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ compatible = "cfi-flash";
++ reg = <0x0 0x0 0x8000000>;
++ bank-width = <2>;
++ device-width = <1>;
++ };
++
++ nand@2,0 {
++ compatible = "fsl,ifc-nand";
++ reg = <0x2 0x0 0x10000>;
++ };
++
++ cpld@3,0 {
++ reg = <0x3 0x0 0x10000>;
++ compatible = "fsl,ls2088a-qds-qixis", "fsl,ls2080a-qds-qixis",
++ "fsl,fpga-qixis";
++ };
++};
++
++&ftm0 {
++ status = "okay";
++};
++
++&i2c0 {
++ status = "okay";
++ pca9547@75 {
++ compatible = "nxp,pca9547";
++ reg = <0x75>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++ i2c-mux-never-disable;
++ i2c@1 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0x01>;
++ rtc@68 {
++ compatible = "dallas,ds3232";
++ reg = <0x68>;
++ };
++ };
++
++ i2c@3 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0x3>;
++
++ adt7481@4c {
++ compatible = "adi,adt7461";
++ reg = <0x4c>;
++ };
++ };
++ };
++};
++
++&i2c1 {
++ status = "disabled";
++};
++
++&i2c2 {
++ status = "disabled";
++};
++
++&i2c3 {
++ status = "disabled";
++};
++
++&dspi {
++ status = "okay";
++ dflash0: n25q512a {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ compatible = "st,m25p80";
++ spi-max-frequency = <3000000>;
++ reg = <0>;
++ };
++};
++
++&qspi {
++ status = "disabled";
++};
++
++&sata0 {
++ status = "okay";
++};
++
++&sata1 {
++ status = "okay";
++};
++
++&usb0 {
++ status = "okay";
++};
++
++&usb1 {
++ status = "okay";
++};
++
++&emdio1 {
++ /* CS4340 PHYs */
++ mdio1_phy1: emdio1_phy@1 {
++ reg = <0x10>;
++ phy-connection-type = "xfi";
++ };
++ mdio1_phy2: emdio1_phy@2 {
++ reg = <0x11>;
++ phy-connection-type = "xfi";
++ };
++ mdio1_phy3: emdio1_phy@3 {
++ reg = <0x12>;
++ phy-connection-type = "xfi";
++ };
++ mdio1_phy4: emdio1_phy@4 {
++ reg = <0x13>;
++ phy-connection-type = "xfi";
++ };
++};
++
++&emdio2 {
++ /* AQR405 PHYs */
++ mdio2_phy1: emdio2_phy@1 {
++ compatible = "ethernet-phy-ieee802.3-c45";
++ interrupts = <0 1 0x4>; /* Level high type */
++ reg = <0x0>;
++ phy-connection-type = "xfi";
++ };
++ mdio2_phy2: emdio2_phy@2 {
++ compatible = "ethernet-phy-ieee802.3-c45";
++ interrupts = <0 2 0x4>; /* Level high type */
++ reg = <0x1>;
++ phy-connection-type = "xfi";
++ };
++ mdio2_phy3: emdio2_phy@3 {
++ compatible = "ethernet-phy-ieee802.3-c45";
++ interrupts = <0 4 0x4>; /* Level high type */
++ reg = <0x2>;
++ phy-connection-type = "xfi";
++ };
++ mdio2_phy4: emdio2_phy@4 {
++ compatible = "ethernet-phy-ieee802.3-c45";
++ interrupts = <0 5 0x4>; /* Level high type */
++ reg = <0x3>;
++ phy-connection-type = "xfi";
++ };
++};
++
++/* Update DPMAC connections to external PHYs, under the assumption of
++ * SerDes 0x2a_0x41. This is currently the only SerDes supported on the board.
++ */
++&dpmac1 {
++ phy-handle = <&mdio1_phy1>;
++};
++&dpmac2 {
++ phy-handle = <&mdio1_phy2>;
++};
++&dpmac3 {
++ phy-handle = <&mdio1_phy3>;
++};
++&dpmac4 {
++ phy-handle = <&mdio1_phy4>;
++};
++&dpmac5 {
++ phy-handle = <&mdio2_phy1>;
++};
++&dpmac6 {
++ phy-handle = <&mdio2_phy2>;
++};
++&dpmac7 {
++ phy-handle = <&mdio2_phy3>;
++};
++&dpmac8 {
++ phy-handle = <&mdio2_phy4>;
++};
+diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
+new file mode 100644
+index 0000000..bd69942
+--- /dev/null
++++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
+@@ -0,0 +1,854 @@
++/*
++ * Device Tree Include file for Freescale Layerscape-2088A family SoC.
++ *
++ * Copyright (C) 2016, Freescale Semiconductor
++ *
++ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPLv2 or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ * a) This library is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of the
++ * License, or (at your option) any later version.
++ *
++ * This library is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Or, alternatively,
++ *
++ * b) Permission is hereby granted, free of charge, to any person
++ * obtaining a copy of this software and associated documentation
++ * files (the "Software"), to deal in the Software without
++ * restriction, including without limitation the rights to use,
++ * copy, modify, merge, publish, distribute, sublicense, and/or
++ * sell copies of the Software, and to permit persons to whom the
++ * Software is furnished to do so, subject to the following
++ * conditions:
++ *
++ * The above copyright notice and this permission notice shall be
++ * included in all copies or substantial portions of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ * OTHER DEALINGS IN THE SOFTWARE.
++ */
++
++#include <dt-bindings/thermal/thermal.h>
++
++/memreserve/ 0x80000000 0x00010000;
++
++/ {
++ compatible = "fsl,ls2088a";
++ interrupt-parent = <&gic>;
++ #address-cells = <2>;
++ #size-cells = <2>;
++
++ cpus {
++ #address-cells = <2>;
++ #size-cells = <0>;
++
++ cpu0: cpu@0 {
++ device_type = "cpu";
++ compatible = "arm,cortex-a72";
++ reg = <0x0 0x0>;
++ clocks = <&clockgen 1 0>;
++ #cooling-cells = <2>;
++ cpu-idle-states = <&CPU_PW20>;
++ };
++
++ cpu1: cpu@1 {
++ device_type = "cpu";
++ compatible = "arm,cortex-a72";
++ reg = <0x0 0x1>;
++ clocks = <&clockgen 1 0>;
++ cpu-idle-states = <&CPU_PW20>;
++ };
++
++ cpu2: cpu@100 {
++ device_type = "cpu";
++ compatible = "arm,cortex-a72";
++ reg = <0x0 0x100>;
++ clocks = <&clockgen 1 1>;
++ #cooling-cells = <2>;
++ cpu-idle-states = <&CPU_PW20>;
++ };
++
++ cpu3: cpu@101 {
++ device_type = "cpu";
++ compatible = "arm,cortex-a72";
++ reg = <0x0 0x101>;
++ clocks = <&clockgen 1 1>;
++ cpu-idle-states = <&CPU_PW20>;
++ };
++
++ cpu4: cpu@200 {
++ device_type = "cpu";
++ compatible = "arm,cortex-a72";
++ reg = <0x0 0x200>;
++ clocks = <&clockgen 1 2>;
++ #cooling-cells = <2>;
++ cpu-idle-states = <&CPU_PW20>;
++ };
++
++ cpu5: cpu@201 {
++ device_type = "cpu";
++ compatible = "arm,cortex-a72";
++ reg = <0x0 0x201>;
++ clocks = <&clockgen 1 2>;
++ cpu-idle-states = <&CPU_PW20>;
++ };
++
++ cpu6: cpu@300 {
++ device_type = "cpu";
++ compatible = "arm,cortex-a72";
++ reg = <0x0 0x300>;
++ clocks = <&clockgen 1 3>;
++ #cooling-cells = <2>;
++ cpu-idle-states = <&CPU_PW20>;
++ };
++
++ cpu7: cpu@301 {
++ device_type = "cpu";
++ compatible = "arm,cortex-a72";
++ reg = <0x0 0x301>;
++ clocks = <&clockgen 1 3>;
++ cpu-idle-states = <&CPU_PW20>;
++ };
++ };
++
++ pmu {
++ compatible = "arm,armv8-pmuv3";
++ interrupts = <1 7 0x8>; /* PMU PPI, Level low type */
++ };
++
++ idle-states {
++ entry-method = "arm,psci";
++
++ CPU_PW20: cpu-pw20 {
++ compatible = "arm,idle-state";
++ idle-state-name = "PW20";
++ arm,psci-suspend-param = <0x00010000>;
++ entry-latency-us = <2000>;
++ exit-latency-us = <2000>;
++ min-residency-us = <6000>;
++ };
++ };
++
++ gic: interrupt-controller@6000000 {
++ compatible = "arm,gic-v3";
++ reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
++ <0x0 0x06100000 0 0x100000>, /* GICR (RD_base + SGI_base) */
++ <0x0 0x0c0c0000 0 0x2000>, /* GICC */
++ <0x0 0x0c0d0000 0 0x1000>, /* GICH */
++ <0x0 0x0c0e0000 0 0x20000>; /* GICV */
++ #interrupt-cells = <3>;
++ #address-cells = <2>;
++ #size-cells = <2>;
++ ranges;
++ interrupt-controller;
++ interrupts = <1 9 0x4>;
++
++ its: gic-its@6020000 {
++ compatible = "arm,gic-v3-its";
++ msi-controller;
++ reg = <0x0 0x6020000 0 0x20000>;
++ };
++ };
++
++ sysclk: sysclk {
++ compatible = "fixed-clock";
++ #clock-cells = <0>;
++ clock-frequency = <100000000>;
++ clock-output-names = "sysclk";
++ };
++
++ clockgen: clocking@1300000 {
++ compatible = "fsl,ls2088a-clockgen";
++ reg = <0 0x1300000 0 0xa0000>;
++ #clock-cells = <2>;
++ clocks = <&sysclk>;
++ };
++
++ tmu: tmu@1f80000 {
++ compatible = "fsl,qoriq-tmu", "fsl,ls2080a-tmu", "fsl,ls2088a-tmu";
++ reg = <0x0 0x1f80000 0x0 0x10000>;
++ interrupts = <0 23 0x4>;
++ fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
++ fsl,tmu-calibration = <0x00000000 0x00000026
++ 0x00000001 0x0000002d
++ 0x00000002 0x00000032
++ 0x00000003 0x00000039
++ 0x00000004 0x0000003f
++ 0x00000005 0x00000046
++ 0x00000006 0x0000004d
++ 0x00000007 0x00000054
++ 0x00000008 0x0000005a
++ 0x00000009 0x00000061
++ 0x0000000a 0x0000006a
++ 0x0000000b 0x00000071
++
++ 0x00010000 0x00000025
++ 0x00010001 0x0000002c
++ 0x00010002 0x00000035
++ 0x00010003 0x0000003d
++ 0x00010004 0x00000045
++ 0x00010005 0x0000004e
++ 0x00010006 0x00000057
++ 0x00010007 0x00000061
++ 0x00010008 0x0000006b
++ 0x00010009 0x00000076
++
++ 0x00020000 0x00000029
++ 0x00020001 0x00000033
++ 0x00020002 0x0000003d
++ 0x00020003 0x00000049
++ 0x00020004 0x00000056
++ 0x00020005 0x00000061
++ 0x00020006 0x0000006d
++
++ 0x00030000 0x00000021
++ 0x00030001 0x0000002a
++ 0x00030002 0x0000003c
++ 0x00030003 0x0000004e>;
++ little-endian;
++ #thermal-sensor-cells = <1>;
++ };
++
++ thermal-zones {
++ cpu_thermal: cpu-thermal {
++ polling-delay-passive = <1000>;
++ polling-delay = <5000>;
++
++ thermal-sensors = <&tmu 4>;
++
++ trips {
++ cpu_alert: cpu-alert {
++ temperature = <75000>;
++ hysteresis = <2000>;
++ type = "passive";
++ };
++ cpu_crit: cpu-crit {
++ temperature = <85000>;
++ hysteresis = <2000>;
++ type = "critical";
++ };
++ };
++
++ cooling-maps {
++ map0 {
++ trip = <&cpu_alert>;
++ cooling-device =
++ <&cpu0 THERMAL_NO_LIMIT
++ THERMAL_NO_LIMIT>;
++ };
++ map1 {
++ trip = <&cpu_alert>;
++ cooling-device =
++ <&cpu2 THERMAL_NO_LIMIT
++ THERMAL_NO_LIMIT>;
++ };
++ map2 {
++ trip = <&cpu_alert>;
++ cooling-device =
++ <&cpu4 THERMAL_NO_LIMIT
++ THERMAL_NO_LIMIT>;
++ };
++ map3 {
++ trip = <&cpu_alert>;
++ cooling-device =
++ <&cpu6 THERMAL_NO_LIMIT
++ THERMAL_NO_LIMIT>;
++ };
++ };
++ };
++ };
++
++ serial0: serial@21c0500 {
++ device_type = "serial";
++ compatible = "fsl,ns16550", "ns16550a";
++ reg = <0x0 0x21c0500 0x0 0x100>;
++ clocks = <&clockgen 4 3>;
++ interrupts = <0 32 0x4>; /* Level high type */
++ };
++
++ serial1: serial@21c0600 {
++ device_type = "serial";
++ compatible = "fsl,ns16550", "ns16550a";
++ reg = <0x0 0x21c0600 0x0 0x100>;
++ clocks = <&clockgen 4 3>;
++ interrupts = <0 32 0x4>; /* Level high type */
++ };
++ cluster1_core0_watchdog: wdt@c000000 {
++ compatible = "arm,sp805-wdt", "arm,primecell";
++ reg = <0x0 0xc000000 0x0 0x1000>;
++ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
++ clock-names = "apb_pclk", "wdog_clk";
++ };
++
++ cluster1_core1_watchdog: wdt@c010000 {
++ compatible = "arm,sp805-wdt", "arm,primecell";
++ reg = <0x0 0xc010000 0x0 0x1000>;
++ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
++ clock-names = "apb_pclk", "wdog_clk";
++ };
++
++ cluster2_core0_watchdog: wdt@c100000 {
++ compatible = "arm,sp805-wdt", "arm,primecell";
++ reg = <0x0 0xc100000 0x0 0x1000>;
++ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
++ clock-names = "apb_pclk", "wdog_clk";
++ };
++
++ cluster2_core1_watchdog: wdt@c110000 {
++ compatible = "arm,sp805-wdt", "arm,primecell";
++ reg = <0x0 0xc110000 0x0 0x1000>;
++ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
++ clock-names = "apb_pclk", "wdog_clk";
++ };
++
++ cluster3_core0_watchdog: wdt@c200000 {
++ compatible = "arm,sp805-wdt", "arm,primecell";
++ reg = <0x0 0xc200000 0x0 0x1000>;
++ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
++ clock-names = "apb_pclk", "wdog_clk";
++ };
++
++ cluster3_core1_watchdog: wdt@c210000 {
++ compatible = "arm,sp805-wdt", "arm,primecell";
++ reg = <0x0 0xc210000 0x0 0x1000>;
++ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
++ clock-names = "apb_pclk", "wdog_clk";
++ };
++
++ cluster4_core0_watchdog: wdt@c300000 {
++ compatible = "arm,sp805-wdt", "arm,primecell";
++ reg = <0x0 0xc300000 0x0 0x1000>;
++ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
++ clock-names = "apb_pclk", "wdog_clk";
++ };
++
++ cluster4_core1_watchdog: wdt@c310000 {
++ compatible = "arm,sp805-wdt", "arm,primecell";
++ reg = <0x0 0xc310000 0x0 0x1000>;
++ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
++ clock-names = "apb_pclk", "wdog_clk";
++ };
++
++ gpio0: gpio@2300000 {
++ compatible = "fsl,qoriq-gpio";
++ reg = <0x0 0x2300000 0x0 0x10000>;
++ interrupts = <0 36 0x4>; /* Level high type */
++ gpio-controller;
++ little-endian;
++ #gpio-cells = <2>;
++ interrupt-controller;
++ #interrupt-cells = <2>;
++ };
++
++ gpio1: gpio@2310000 {
++ compatible = "fsl,qoriq-gpio";
++ reg = <0x0 0x2310000 0x0 0x10000>;
++ interrupts = <0 36 0x4>; /* Level high type */
++ gpio-controller;
++ little-endian;
++ #gpio-cells = <2>;
++ interrupt-controller;
++ #interrupt-cells = <2>;
++ };
++
++ gpio2: gpio@2320000 {
++ compatible = "fsl,qoriq-gpio";
++ reg = <0x0 0x2320000 0x0 0x10000>;
++ interrupts = <0 37 0x4>; /* Level high type */
++ gpio-controller;
++ little-endian;
++ #gpio-cells = <2>;
++ interrupt-controller;
++ #interrupt-cells = <2>;
++ };
++
++ gpio3: gpio@2330000 {
++ compatible = "fsl,qoriq-gpio";
++ reg = <0x0 0x2330000 0x0 0x10000>;
++ interrupts = <0 37 0x4>; /* Level high type */
++ gpio-controller;
++ little-endian;
++ #gpio-cells = <2>;
++ interrupt-controller;
++ #interrupt-cells = <2>;
++ };
++
++ /* TODO: WRIOP (CCSR?) */
++ emdio1: mdio@0x8B96000 { /* WRIOP0: 0x8B8_0000, E-MDIO1: 0x1_6000 */
++ compatible = "fsl,fman-memac-mdio";
++ reg = <0x0 0x8B96000 0x0 0x1000>;
++ device_type = "mdio"; /* TODO: is this necessary? */
++ little-endian; /* force the driver in LE mode */
++
++ /* Not necessary on the QDS, but needed on the RDB */
++ #address-cells = <1>;
++ #size-cells = <0>;
++ };
++
++ emdio2: mdio@0x8B97000 { /* WRIOP0: 0x8B8_0000, E-MDIO2: 0x1_7000 */
++ compatible = "fsl,fman-memac-mdio";
++ reg = <0x0 0x8B97000 0x0 0x1000>;
++ device_type = "mdio"; /* TODO: is this necessary? */
++ little-endian; /* force the driver in LE mode */
++
++ #address-cells = <1>;
++ #size-cells = <0>;
++ };
++
++ ifc: ifc@2240000 {
++ compatible = "fsl,ifc", "simple-bus";
++ reg = <0x0 0x2240000 0x0 0x20000>;
++ interrupts = <0 21 0x4>; /* Level high type */
++ little-endian;
++ #address-cells = <2>;
++ #size-cells = <1>;
++
++ ranges = <0 0 0x5 0x80000000 0x08000000
++ 2 0 0x5 0x30000000 0x00010000
++ 3 0 0x5 0x20000000 0x00010000>;
++ };
++
++ esdhc: esdhc@2140000 {
++ compatible = "fsl,ls2088a-esdhc", "fsl,ls2080a-esdhc",
++ "fsl,esdhc";
++ reg = <0x0 0x2140000 0x0 0x10000>;
++ interrupts = <0 28 0x4>; /* Level high type */
++ clock-frequency = <0>;
++ voltage-ranges = <1800 1800 3300 3300>;
++ sdhci,auto-cmd12;
++ little-endian;
++ bus-width = <4>;
++ };
++
++ ftm0: ftm0@2800000 {
++ compatible = "fsl,ftm-alarm";
++ reg = <0x0 0x2800000 0x0 0x10000>;
++ interrupts = <0 44 4>;
++ };
++
++ reset: reset@1E60000 {
++ compatible = "fsl,ls-reset";
++ reg = <0x0 0x1E60000 0x0 0x10000>;
++ };
++
++ dspi: dspi@2100000 {
++ compatible = "fsl,ls2088a-dspi", "fsl,ls2085a-dspi",
++ "fsl,ls2080a-dspi";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0x0 0x2100000 0x0 0x10000>;
++ interrupts = <0 26 0x4>; /* Level high type */
++ clocks = <&clockgen 4 3>;
++ clock-names = "dspi";
++ spi-num-chipselects = <5>;
++ bus-num = <0>;
++ };
++
++ i2c0: i2c@2000000 {
++ compatible = "fsl,vf610-i2c";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0x0 0x2000000 0x0 0x10000>;
++ interrupts = <0 34 0x4>; /* Level high type */
++ clock-names = "i2c";
++ clocks = <&clockgen 4 3>;
++ };
++
++ i2c1: i2c@2010000 {
++ compatible = "fsl,vf610-i2c";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0x0 0x2010000 0x0 0x10000>;
++ interrupts = <0 34 0x4>; /* Level high type */
++ clock-names = "i2c";
++ clocks = <&clockgen 4 3>;
++ };
++
++ i2c2: i2c@2020000 {
++ compatible = "fsl,vf610-i2c";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0x0 0x2020000 0x0 0x10000>;
++ interrupts = <0 35 0x4>; /* Level high type */
++ clock-names = "i2c";
++ clocks = <&clockgen 4 3>;
++ };
++
++ i2c3: i2c@2030000 {
++ compatible = "fsl,vf610-i2c";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0x0 0x2030000 0x0 0x10000>;
++ interrupts = <0 35 0x4>; /* Level high type */
++ clock-names = "i2c";
++ clocks = <&clockgen 4 3>;
++ };
++
++ qspi: quadspi@20c0000 {
++ compatible = "fsl,ls2088a-qspi", "fsl,ls2080a-qspi";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0x0 0x20c0000 0x0 0x10000>,
++ <0x0 0x20000000 0x0 0x10000000>;
++ reg-names = "QuadSPI", "QuadSPI-memory";
++ interrupts = <0 25 0x4>; /* Level high type */
++ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
++ clock-names = "qspi_en", "qspi";
++ };
++
++ pcie1: pcie@3400000 {
++ compatible = "fsl,ls2088a-pcie", "fsl,ls2080a-pcie",
++ "fsl,ls2085a-pcie", "snps,dw-pcie";
++ reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
++ 0x20 0x00000000 0x0 0x00002000>; /* configuration space */
++ reg-names = "regs", "config";
++ interrupts = <0 108 0x4>; /* Level high type */
++ interrupt-names = "aer";
++ #address-cells = <3>;
++ #size-cells = <2>;
++ device_type = "pci";
++ dma-coherent;
++ fsl,lut_diff;
++ num-lanes = <4>;
++ bus-range = <0x0 0xff>;
++ ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000 /* downstream I/O */
++ 0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
++ msi-parent = <&its>;
++ #interrupt-cells = <1>;
++ interrupt-map-mask = <0 0 0 7>;
++ interrupt-map = <0000 0 0 1 &gic 0 0 0 109 4>,
++ <0000 0 0 2 &gic 0 0 0 110 4>,
++ <0000 0 0 3 &gic 0 0 0 111 4>,
++ <0000 0 0 4 &gic 0 0 0 112 4>;
++ };
++
++ pcie2: pcie@3500000 {
++ compatible = "fsl,ls2080a-pcie", "fsl,ls2080a-pcie",
++ "fsl,ls2085a-pcie", "snps,dw-pcie";
++ reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
++ 0x28 0x00000000 0x0 0x00002000>; /* configuration space */
++ reg-names = "regs", "config";
++ interrupts = <0 113 0x4>; /* Level high type */
++ interrupt-names = "aer";
++ #address-cells = <3>;
++ #size-cells = <2>;
++ device_type = "pci";
++ dma-coherent;
++ fsl,lut_diff;
++ num-lanes = <4>;
++ bus-range = <0x0 0xff>;
++ ranges = <0x81000000 0x0 0x00000000 0x28 0x00010000 0x0 0x00010000 /* downstream I/O */
++ 0x82000000 0x0 0x40000000 0x28 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
++ msi-parent = <&its>;
++ #interrupt-cells = <1>;
++ interrupt-map-mask = <0 0 0 7>;
++ interrupt-map = <0000 0 0 1 &gic 0 0 0 114 4>,
++ <0000 0 0 2 &gic 0 0 0 115 4>,
++ <0000 0 0 3 &gic 0 0 0 116 4>,
++ <0000 0 0 4 &gic 0 0 0 117 4>;
++ };
++
++ pcie3: pcie@3600000 {
++ compatible = "fsl,ls2088a-pcie", "fsl,ls2080a-pcie",
++ "fsl,ls2085a-pcie", "snps,dw-pcie";
++ reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
++ 0x30 0x00000000 0x0 0x00002000>; /* configuration space */
++ reg-names = "regs", "config";
++ interrupts = <0 118 0x4>; /* Level high type */
++ interrupt-names = "aer";
++ #address-cells = <3>;
++ #size-cells = <2>;
++ device_type = "pci";
++ dma-coherent;
++ fsl,lut_diff;
++ num-lanes = <8>;
++ bus-range = <0x0 0xff>;
++ ranges = <0x81000000 0x0 0x00000000 0x30 0x00010000 0x0 0x00010000 /* downstream I/O */
++ 0x82000000 0x0 0x40000000 0x30 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
++ msi-parent = <&its>;
++ #interrupt-cells = <1>;
++ interrupt-map-mask = <0 0 0 7>;
++ interrupt-map = <0000 0 0 1 &gic 0 0 0 119 4>,
++ <0000 0 0 2 &gic 0 0 0 120 4>,
++ <0000 0 0 3 &gic 0 0 0 121 4>,
++ <0000 0 0 4 &gic 0 0 0 122 4>;
++ };
++
++ pcie4: pcie@3700000 {
++ compatible = "fsl,ls2080a-pcie", "fsl,ls2080a-pcie",
++ "fsl,ls2085a-pcie", "snps,dw-pcie";
++ reg = <0x00 0x03700000 0x0 0x00100000 /* controller registers */
++ 0x38 0x00000000 0x0 0x00002000>; /* configuration space */
++ reg-names = "regs", "config";
++ interrupts = <0 123 0x4>; /* Level high type */
++ interrupt-names = "aer";
++ #address-cells = <3>;
++ #size-cells = <2>;
++ device_type = "pci";
++ dma-coherent;
++ fsl,lut_diff;
++ num-lanes = <4>;
++ bus-range = <0x0 0xff>;
++ ranges = <0x81000000 0x0 0x00000000 0x38 0x00010000 0x0 0x00010000 /* downstream I/O */
++ 0x82000000 0x0 0x40000000 0x38 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
++ msi-parent = <&its>;
++ #interrupt-cells = <1>;
++ interrupt-map-mask = <0 0 0 7>;
++ interrupt-map = <0000 0 0 1 &gic 0 0 0 124 4>,
++ <0000 0 0 2 &gic 0 0 0 125 4>,
++ <0000 0 0 3 &gic 0 0 0 126 4>,
++ <0000 0 0 4 &gic 0 0 0 127 4>;
++ };
++
++ sata0: sata@3200000 {
++ status = "disabled";
++ compatible = "fsl,ls2088a-ahci", "fsl,ls2080a-ahci";
++ reg = <0x0 0x3200000 0x0 0x10000>;
++ interrupts = <0 133 0x4>; /* Level high type */
++ clocks = <&clockgen 4 3>;
++ };
++
++ sata1: sata@3210000 {
++ status = "disabled";
++ compatible = "fsl,ls2088a-ahci", "fsl,ls2080a-ahci";
++ reg = <0x0 0x3210000 0x0 0x10000>;
++ interrupts = <0 136 0x4>; /* Level high type */
++ clocks = <&clockgen 4 3>;
++ };
++
++ usb0: usb3@3100000 {
++ status = "disabled";
++ compatible = "snps,dwc3";
++ reg = <0x0 0x3100000 0x0 0x10000>;
++ interrupts = <0 80 0x4>; /* Level high type */
++ dr_mode = "host";
++ configure-gfladj;
++ snps,dis_rxdet_inp3_quirk;
++ };
++
++ usb1: usb3@3110000 {
++ status = "disabled";
++ compatible = "snps,dwc3";
++ reg = <0x0 0x3110000 0x0 0x10000>;
++ interrupts = <0 81 0x4>; /* Level high type */
++ dr_mode = "host";
++ configure-gfladj;
++ snps,dis_rxdet_inp3_quirk;
++ };
++
++ smmu: iommu@5000000 {
++ compatible = "arm,mmu-500";
++ reg = <0 0x5000000 0 0x800000>;
++ #global-interrupts = <12>;
++ interrupts = <0 13 4>, /* global secure fault */
++ <0 14 4>, /* combined secure interrupt */
++ <0 15 4>, /* global non-secure fault */
++ <0 16 4>, /* combined non-secure interrupt */
++ /* performance counter interrupts 0-7 */
++ <0 211 4>,
++ <0 212 4>,
++ <0 213 4>,
++ <0 214 4>,
++ <0 215 4>,
++ <0 216 4>,
++ <0 217 4>,
++ <0 218 4>,
++ /* per context interrupt, 64 interrupts */
++ <0 146 4>,
++ <0 147 4>,
++ <0 148 4>,
++ <0 149 4>,
++ <0 150 4>,
++ <0 151 4>,
++ <0 152 4>,
++ <0 153 4>,
++ <0 154 4>,
++ <0 155 4>,
++ <0 156 4>,
++ <0 157 4>,
++ <0 158 4>,
++ <0 159 4>,
++ <0 160 4>,
++ <0 161 4>,
++ <0 162 4>,
++ <0 163 4>,
++ <0 164 4>,
++ <0 165 4>,
++ <0 166 4>,
++ <0 167 4>,
++ <0 168 4>,
++ <0 169 4>,
++ <0 170 4>,
++ <0 171 4>,
++ <0 172 4>,
++ <0 173 4>,
++ <0 174 4>,
++ <0 175 4>,
++ <0 176 4>,
++ <0 177 4>,
++ <0 178 4>,
++ <0 179 4>,
++ <0 180 4>,
++ <0 181 4>,
++ <0 182 4>,
++ <0 183 4>,
++ <0 184 4>,
++ <0 185 4>,
++ <0 186 4>,
++ <0 187 4>,
++ <0 188 4>,
++ <0 189 4>,
++ <0 190 4>,
++ <0 191 4>,
++ <0 192 4>,
++ <0 193 4>,
++ <0 194 4>,
++ <0 195 4>,
++ <0 196 4>,
++ <0 197 4>,
++ <0 198 4>,
++ <0 199 4>,
++ <0 200 4>,
++ <0 201 4>,
++ <0 202 4>,
++ <0 203 4>,
++ <0 204 4>,
++ <0 205 4>,
++ <0 206 4>,
++ <0 207 4>,
++ <0 208 4>,
++ <0 209 4>;
++ mmu-masters = <&fsl_mc 0x300 0>;
++ };
++
++ timer {
++ compatible = "arm,armv8-timer";
++ interrupts = <1 13 0x1>, /* Physical Secure PPI, edge triggered */
++ <1 14 0x1>, /* Physical Non-Secure PPI, edge triggered */
++ <1 11 0x1>, /* Virtual PPI, edge triggered */
++ <1 10 0x1>; /* Hypervisor PPI, edge triggered */
++ arm,reread-timer;
++ fsl,erratum-a008585;
++ };
++
++ fsl_mc: fsl-mc@80c000000 {
++ compatible = "fsl,qoriq-mc";
++ #stream-id-cells = <2>;
++ reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */
++ <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
++ msi-parent = <&its>;
++ #address-cells = <3>;
++ #size-cells = <1>;
++
++ /*
++ * Region type 0x0 - MC portals
++ * Region type 0x1 - QBMAN portals
++ */
++ ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000
++ 0x1 0x0 0x0 0x8 0x18000000 0x8000000>;
++
++ /*
++ * Define the maximum number of MACs present on the SoC.
++ * They won't necessarily be all probed, since the
++ * Data Path Layout file and the MC firmware can put fewer
++ * actual DPMAC objects on the MC bus.
++ */
++ dpmacs {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ dpmac1: dpmac@1 {
++ compatible = "fsl,qoriq-mc-dpmac";
++ reg = <1>;
++ };
++ dpmac2: dpmac@2 {
++ compatible = "fsl,qoriq-mc-dpmac";
++ reg = <2>;
++ };
++ dpmac3: dpmac@3 {
++ compatible = "fsl,qoriq-mc-dpmac";
++ reg = <3>;
++ };
++ dpmac4: dpmac@4 {
++ compatible = "fsl,qoriq-mc-dpmac";
++ reg = <4>;
++ };
++ dpmac5: dpmac@5 {
++ compatible = "fsl,qoriq-mc-dpmac";
++ reg = <5>;
++ };
++ dpmac6: dpmac@6 {
++ compatible = "fsl,qoriq-mc-dpmac";
++ reg = <6>;
++ };
++ dpmac7: dpmac@7 {
++ compatible = "fsl,qoriq-mc-dpmac";
++ reg = <7>;
++ };
++ dpmac8: dpmac@8 {
++ compatible = "fsl,qoriq-mc-dpmac";
++ reg = <8>;
++ };
++ dpmac9: dpmac@9 {
++ compatible = "fsl,qoriq-mc-dpmac";
++ reg = <9>;
++ };
++ dpmac10: dpmac@10 {
++ compatible = "fsl,qoriq-mc-dpmac";
++ reg = <0xa>;
++ };
++ dpmac11: dpmac@11 {
++ compatible = "fsl,qoriq-mc-dpmac";
++ reg = <0xb>;
++ };
++ dpmac12: dpmac@12 {
++ compatible = "fsl,qoriq-mc-dpmac";
++ reg = <0xc>;
++ };
++ dpmac13: dpmac@13 {
++ compatible = "fsl,qoriq-mc-dpmac";
++ reg = <0xd>;
++ };
++ dpmac14: dpmac@14 {
++ compatible = "fsl,qoriq-mc-dpmac";
++ reg = <0xe>;
++ };
++ dpmac15: dpmac@15 {
++ compatible = "fsl,qoriq-mc-dpmac";
++ reg = <0xf>;
++ };
++ dpmac16: dpmac@16 {
++ compatible = "fsl,qoriq-mc-dpmac";
++ reg = <0x10>;
++ };
++ };
++ };
++
++ ccn@4000000 {
++ compatible = "arm,ccn-504";
++ reg = <0x0 0x04000000 0x0 0x01000000>;
++ interrupts = <0 12 4>;
++ };
++
++ memory@80000000 {
++ device_type = "memory";
++ reg = <0x00000000 0x80000000 0 0x80000000>;
++ /* DRAM space 1 - 2 GB DRAM */
++ };
++};
+--
+1.7.9.5
+
projects / openwrt / staging / yousong.git / blobdiff