layerscape: drop linux 4.4 support
[openwrt/staging/stintel.git] / target / linux / layerscape / patches-4.4 / 9070-Revert-arm64-use-fixmap-region-for-permanent-FDT-map.patch
diff --git a/target/linux/layerscape/patches-4.4/9070-Revert-arm64-use-fixmap-region-for-permanent-FDT-map.patch b/target/linux/layerscape/patches-4.4/9070-Revert-arm64-use-fixmap-region-for-permanent-FDT-map.patch
deleted file mode 100644 (file)
index c247db4..0000000
+++ /dev/null
@@ -1,304 +0,0 @@
-From 6f7a129e59721f6d97a0f06f7078d06f19ade69e Mon Sep 17 00:00:00 2001
-From: Yutang Jiang <yutang.jiang@nxp.com>
-Date: Thu, 21 Jul 2016 19:37:42 +0800
-Subject: [PATCH 70/70] Revert "arm64: use fixmap region for permanent FDT
- mapping"
-
-Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
----
- Documentation/arm64/booting.txt |   10 +++----
- arch/arm64/include/asm/boot.h   |   14 ----------
- arch/arm64/include/asm/fixmap.h |   15 -----------
- arch/arm64/include/asm/mmu.h    |    1 -
- arch/arm64/kernel/head.S        |   39 ++++++++++++++++++++++++++-
- arch/arm64/kernel/setup.c       |   29 +++++++++++++-------
- arch/arm64/mm/init.c            |    1 +
- arch/arm64/mm/mmu.c             |   57 ---------------------------------------
- 8 files changed, 62 insertions(+), 104 deletions(-)
- delete mode 100644 arch/arm64/include/asm/boot.h
-
---- a/Documentation/arm64/booting.txt
-+++ b/Documentation/arm64/booting.txt
-@@ -45,13 +45,11 @@ sees fit.)
- Requirement: MANDATORY
--The device tree blob (dtb) must be placed on an 8-byte boundary and must
--not exceed 2 megabytes in size. Since the dtb will be mapped cacheable
--using blocks of up to 2 megabytes in size, it must not be placed within
--any 2M region which must be mapped with any specific attributes.
-+The device tree blob (dtb) must be placed on an 8-byte boundary within
-+the first 512 megabytes from the start of the kernel image and must not
-+cross a 2-megabyte boundary. This is to allow the kernel to map the
-+blob using a single section mapping in the initial page tables.
--NOTE: versions prior to v4.2 also require that the DTB be placed within
--the 512 MB region starting at text_offset bytes below the kernel Image.
- 3. Decompress the kernel image
- ------------------------------
---- a/arch/arm64/include/asm/boot.h
-+++ /dev/null
-@@ -1,14 +0,0 @@
--
--#ifndef __ASM_BOOT_H
--#define __ASM_BOOT_H
--
--#include <asm/sizes.h>
--
--/*
-- * arm64 requires the DTB to be 8 byte aligned and
-- * not exceed 2MB in size.
-- */
--#define MIN_FDT_ALIGN         8
--#define MAX_FDT_SIZE          SZ_2M
--
--#endif
---- a/arch/arm64/include/asm/fixmap.h
-+++ b/arch/arm64/include/asm/fixmap.h
-@@ -18,7 +18,6 @@
- #ifndef __ASSEMBLY__
- #include <linux/kernel.h>
- #include <linux/sizes.h>
--#include <asm/boot.h>
- #include <asm/page.h>
- /*
-@@ -34,20 +33,6 @@
-  */
- enum fixed_addresses {
-       FIX_HOLE,
--
--      /*
--       * Reserve a virtual window for the FDT that is 2 MB larger than the
--       * maximum supported size, and put it at the top of the fixmap region.
--       * The additional space ensures that any FDT that does not exceed
--       * MAX_FDT_SIZE can be mapped regardless of whether it crosses any
--       * 2 MB alignment boundaries.
--       *
--       * Keep this at the top so it remains 2 MB aligned.
--       */
--#define FIX_FDT_SIZE          (MAX_FDT_SIZE + SZ_2M)
--      FIX_FDT_END,
--      FIX_FDT = FIX_FDT_END + FIX_FDT_SIZE / PAGE_SIZE - 1,
--
-       FIX_EARLYCON_MEM_BASE,
-       FIX_TEXT_POKE0,
-       __end_of_permanent_fixed_addresses,
---- a/arch/arm64/include/asm/mmu.h
-+++ b/arch/arm64/include/asm/mmu.h
-@@ -34,6 +34,5 @@ extern void init_mem_pgprot(void);
- extern void create_pgd_mapping(struct mm_struct *mm, phys_addr_t phys,
-                              unsigned long virt, phys_addr_t size,
-                              pgprot_t prot);
--extern void *fixmap_remap_fdt(phys_addr_t dt_phys);
- #endif
---- a/arch/arm64/kernel/head.S
-+++ b/arch/arm64/kernel/head.S
-@@ -212,6 +212,8 @@ ENTRY(stext)
-       bl      el2_setup                       // Drop to EL1, w20=cpu_boot_mode
-       adrp    x24, __PHYS_OFFSET
-       bl      set_cpu_boot_mode_flag
-+
-+      bl      __vet_fdt
-       bl      __create_page_tables            // x25=TTBR0, x26=TTBR1
-       /*
-        * The following calls CPU setup code, see arch/arm64/mm/proc.S for
-@@ -243,6 +245,24 @@ preserve_boot_args:
- ENDPROC(preserve_boot_args)
- /*
-+ * Determine validity of the x21 FDT pointer.
-+ * The dtb must be 8-byte aligned and live in the first 512M of memory.
-+ */
-+__vet_fdt:
-+      tst     x21, #0x7
-+      b.ne    1f
-+      cmp     x21, x24
-+      b.lt    1f
-+      mov     x0, #(1 << 29)
-+      add     x0, x0, x24
-+      cmp     x21, x0
-+      b.ge    1f
-+      ret
-+1:
-+      mov     x21, #0
-+      ret
-+ENDPROC(__vet_fdt)
-+/*
-  * Macro to create a table entry to the next page.
-  *
-  *    tbl:    page table address
-@@ -306,7 +326,8 @@ ENDPROC(preserve_boot_args)
-  * required to get the kernel running. The following sections are required:
-  *   - identity mapping to enable the MMU (low address, TTBR0)
-  *   - first few MB of the kernel linear mapping to jump to once the MMU has
-- *     been enabled
-+ *     been enabled, including the FDT blob (TTBR1)
-+ *   - pgd entry for fixed mappings (TTBR1)
-  */
- __create_page_tables:
-       adrp    x25, idmap_pg_dir
-@@ -396,6 +417,22 @@ __create_page_tables:
-       create_block_map x0, x7, x3, x5, x6
-       /*
-+       * Map the FDT blob (maximum 2MB; must be within 512MB of
-+       * PHYS_OFFSET).
-+       */
-+      mov     x3, x21                         // FDT phys address
-+      and     x3, x3, #~((1 << 21) - 1)       // 2MB aligned
-+      mov     x6, #PAGE_OFFSET
-+      sub     x5, x3, x24                     // subtract PHYS_OFFSET
-+      tst     x5, #~((1 << 29) - 1)           // within 512MB?
-+      csel    x21, xzr, x21, ne               // zero the FDT pointer
-+      b.ne    1f
-+      add     x5, x5, x6                      // __va(FDT blob)
-+      add     x6, x5, #1 << 21                // 2MB for the FDT blob
-+      sub     x6, x6, #1                      // inclusive range
-+      create_block_map x0, x7, x3, x5, x6
-+1:
-+      /*
-        * Since the page tables have been populated with non-cacheable
-        * accesses (MMU disabled), invalidate the idmap and swapper page
-        * tables again to remove any speculatively loaded cache lines.
---- a/arch/arm64/kernel/setup.c
-+++ b/arch/arm64/kernel/setup.c
-@@ -87,6 +87,18 @@ static struct resource mem_res[] = {
- #define kernel_code mem_res[0]
- #define kernel_data mem_res[1]
-+void __init early_print(const char *str, ...)
-+{
-+      char buf[256];
-+      va_list ap;
-+
-+      va_start(ap, str);
-+      vsnprintf(buf, sizeof(buf), str, ap);
-+      va_end(ap);
-+
-+      printk("%s", buf);
-+}
-+
- /*
-  * The recorded values of x0 .. x3 upon kernel entry.
-  */
-@@ -180,14 +192,12 @@ static void __init smp_build_mpidr_hash(
- static void __init setup_machine_fdt(phys_addr_t dt_phys)
- {
--      void *dt_virt = fixmap_remap_fdt(dt_phys);
--
--      if (!dt_virt || !early_init_dt_scan(dt_virt)) {
--              pr_crit("\n"
--                      "Error: invalid device tree blob at physical address %pa (virtual address 0x%p)\n"
--                      "The dtb must be 8-byte aligned and must not exceed 2 MB in size\n"
--                      "\nPlease check your bootloader.",
--                      &dt_phys, dt_virt);
-+      if (!dt_phys || !early_init_dt_scan(phys_to_virt(dt_phys))) {
-+              early_print("\n"
-+                      "Error: invalid device tree blob at physical address 0x%p (virtual address 0x%p)\n"
-+                      "The dtb must be 8-byte aligned and passed in the first 512MB of memory\n"
-+                      "\nPlease check your bootloader.\n",
-+                      dt_phys, phys_to_virt(dt_phys));
-               while (true)
-                       cpu_relax();
-@@ -294,6 +304,7 @@ void __init setup_arch(char **cmdline_p)
-       pr_info("Boot CPU: AArch64 Processor [%08x]\n", read_cpuid_id());
-       sprintf(init_utsname()->machine, ELF_PLATFORM);
-+      setup_machine_fdt(__fdt_pointer);
-       init_mm.start_code = (unsigned long) _text;
-       init_mm.end_code   = (unsigned long) _etext;
-       init_mm.end_data   = (unsigned long) _edata;
-@@ -304,8 +315,6 @@ void __init setup_arch(char **cmdline_p)
-       early_fixmap_init();
-       early_ioremap_init();
--      setup_machine_fdt(__fdt_pointer);
--
-       parse_early_param();
-       /*
---- a/arch/arm64/mm/init.c
-+++ b/arch/arm64/mm/init.c
-@@ -171,6 +171,7 @@ void __init arm64_memblock_init(void)
-               memblock_reserve(__virt_to_phys(initrd_start), initrd_end - initrd_start);
- #endif
-+      early_init_fdt_reserve_self();
-       early_init_fdt_scan_reserved_mem();
-       /* 4GB maximum for 32-bit only capable devices */
---- a/arch/arm64/mm/mmu.c
-+++ b/arch/arm64/mm/mmu.c
-@@ -21,7 +21,6 @@
- #include <linux/kernel.h>
- #include <linux/errno.h>
- #include <linux/init.h>
--#include <linux/libfdt.h>
- #include <linux/mman.h>
- #include <linux/nodemask.h>
- #include <linux/memblock.h>
-@@ -641,59 +640,3 @@ void __set_fixmap(enum fixed_addresses i
-               flush_tlb_kernel_range(addr, addr+PAGE_SIZE);
-       }
- }
--
--void *__init fixmap_remap_fdt(phys_addr_t dt_phys)
--{
--      const u64 dt_virt_base = __fix_to_virt(FIX_FDT);
--      pgprot_t prot = PAGE_KERNEL_RO;
--      int size, offset;
--      void *dt_virt;
--
--      /*
--       * Check whether the physical FDT address is set and meets the minimum
--       * alignment requirement. Since we are relying on MIN_FDT_ALIGN to be
--       * at least 8 bytes so that we can always access the magic and size
--       * fields of the FDT header after mapping the first chunk, double check
--       * here if that is indeed the case.
--       */
--      BUILD_BUG_ON(MIN_FDT_ALIGN < 8);
--      if (!dt_phys || dt_phys % MIN_FDT_ALIGN)
--              return NULL;
--
--      /*
--       * Make sure that the FDT region can be mapped without the need to
--       * allocate additional translation table pages, so that it is safe
--       * to call create_mapping() this early.
--       *
--       * On 64k pages, the FDT will be mapped using PTEs, so we need to
--       * be in the same PMD as the rest of the fixmap.
--       * On 4k pages, we'll use section mappings for the FDT so we only
--       * have to be in the same PUD.
--       */
--      BUILD_BUG_ON(dt_virt_base % SZ_2M);
--
--      BUILD_BUG_ON(__fix_to_virt(FIX_FDT_END) >> SWAPPER_TABLE_SHIFT !=
--                   __fix_to_virt(FIX_BTMAP_BEGIN) >> SWAPPER_TABLE_SHIFT);
--
--      offset = dt_phys % SWAPPER_BLOCK_SIZE;
--      dt_virt = (void *)dt_virt_base + offset;
--
--      /* map the first chunk so we can read the size from the header */
--      create_mapping(round_down(dt_phys, SWAPPER_BLOCK_SIZE), dt_virt_base,
--                     SWAPPER_BLOCK_SIZE, prot);
--
--      if (fdt_magic(dt_virt) != FDT_MAGIC)
--              return NULL;
--
--      size = fdt_totalsize(dt_virt);
--      if (size > MAX_FDT_SIZE)
--              return NULL;
--
--      if (offset + size > SWAPPER_BLOCK_SIZE)
--              create_mapping(round_down(dt_phys, SWAPPER_BLOCK_SIZE), dt_virt_base,
--                             round_up(offset + size, SWAPPER_BLOCK_SIZE), prot);
--
--      memblock_reserve(dt_phys, size);
--
--      return dt_virt;
--}