kernel: delete Linux 5.4 config and patches

[openwrt/staging/chunkeey.git] / target / linux / layerscape / patches-5.4 / 302-dts-0091-arm64-dts-ls1028a-Add-properties-for-HD-Display-cont.patch

diff --git a/target/linux/layerscape/patches-5.4/302-dts-0091-arm64-dts-ls1028a-Add-properties-for-HD-Display-cont.patch b/target/linux/layerscape/patches-5.4/302-dts-0091-arm64-dts-ls1028a-Add-properties-for-HD-Display-cont.patch
deleted file mode 100644 (file)
index 07620e5..0000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0091-arm64-dts-ls1028a-Add-properties-for-HD-Display-cont.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From e0afa16cad94b26e13d673647b781dd336cb30bc Mon Sep 17 00:00:00 2001
-From: Wen He <wen.he_1@nxp.com>
-Date: Mon, 14 Oct 2019 14:25:42 +0800
-Subject: [PATCH] arm64: dts: ls1028a: Add properties for HD Display controller
- node
-
-The HD Display controller includes DP TX CTRL and DPHY, their offers
-multi-protocol support of standards such as DisplayPort and eDP, with
-one of these standards supported at a time.
-
-This patch enables the HD Display controller driver on the LS1028A.
-
-Signed-off-by: Wen He <wen.he_1@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 16 ++++++++++++++++
- 1 file changed, 16 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-@@ -854,7 +854,23 @@
- 
-               port {
-                       dp0_out: endpoint {
-+                              remote-endpoint = <&dp1_out>;
-+                      };
-+              };
-+      };
- 
-+      hdptx0: display@f200000 {
-+              compatible = "cdn,ls1028a-dp";
-+              reg = <0x0 0xf200000 0x0 0xfffff>;
-+              interrupts = <0 221 IRQ_TYPE_LEVEL_HIGH>;
-+              clocks = <&clockgen 2 2>, <&clockgen 2 2>, <&clockgen 2 2>,
-+                       <&clockgen 2 2>, <&clockgen 2 2>, <&dpclk>;
-+              clock-names = "clk_core", "pclk", "sclk",
-+                            "cclk", "clk_vif", "clk_pxl";
-+
-+              port {
-+                      dp1_out: endpoint {
-+                              remote-endpoint = <&dp0_out>;
-                       };
-               };
-       };