kernel: delete Linux 5.4 config and patches

[openwrt/staging/chunkeey.git] / target / linux / layerscape / patches-5.4 / 701-net-0304-staging-fsl_ppfe-eth-handle-ls1012a-errata_a010897.patch

diff --git a/target/linux/layerscape/patches-5.4/701-net-0304-staging-fsl_ppfe-eth-handle-ls1012a-errata_a010897.patch b/target/linux/layerscape/patches-5.4/701-net-0304-staging-fsl_ppfe-eth-handle-ls1012a-errata_a010897.patch
deleted file mode 100644 (file)
index d7ee96a..0000000
--- a/target/linux/layerscape/patches-5.4/701-net-0304-staging-fsl_ppfe-eth-handle-ls1012a-errata_a010897.patch
+++ /dev/null
@@ -1,107 +0,0 @@
-From a563dccef2871e37efcfcb2f3faee7c9f9381f6c Mon Sep 17 00:00:00 2001
-From: Calvin Johnson <calvin.johnson@nxp.com>
-Date: Wed, 20 Jun 2018 10:23:41 +0530
-Subject: [PATCH] staging: fsl_ppfe/eth: handle ls1012a errata_a010897
-
-On LS1012A rev 1.0, Jumbo frames are not supported as it causes
-the PFE controller to hang. A reset of the entire chip is required
-to resume normal operation.
-
-To handle this errata, frames with length > 1900 are truncated for
-rev 1.0 of LS1012A.
-
-Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
----
- drivers/staging/fsl_ppfe/pfe_eth.c | 20 +++++++++++++++++++-
- drivers/staging/fsl_ppfe/pfe_eth.h |  3 ++-
- drivers/staging/fsl_ppfe/pfe_hal.c | 10 +++++++++-
- 3 files changed, 30 insertions(+), 3 deletions(-)
-
---- a/drivers/staging/fsl_ppfe/pfe_eth.c
-+++ b/drivers/staging/fsl_ppfe/pfe_eth.c
-@@ -44,6 +44,7 @@
- #include <linux/delay.h>
- #include <linux/regmap.h>
- #include <linux/i2c.h>
-+#include <linux/fsl/guts.h>
- 
- #if defined(CONFIG_NF_CONNTRACK_MARK)
- #include <net/netfilter/nf_conntrack.h>
-@@ -52,6 +53,10 @@
- #include "pfe_mod.h"
- #include "pfe_eth.h"
- 
-+#define LS1012A_REV_1_0               0x87040010
-+
-+bool pfe_errata_a010897;
-+
- static void *cbus_emac_base[3];
- static void *cbus_gpi_base[3];
- 
-@@ -2362,7 +2367,15 @@ static int pfe_eth_init_one(struct pfe *
- 
-       /* Set MTU limits */
-       ndev->min_mtu = ETH_MIN_MTU;
--      ndev->max_mtu = JUMBO_FRAME_SIZE;
-+
-+/*
-+ * Jumbo frames are not supported on LS1012A rev-1.0.
-+ * So max mtu should be restricted to supported frame length.
-+ */
-+      if (pfe_errata_a010897)
-+              ndev->max_mtu = JUMBO_FRAME_SIZE_V1 - ETH_HLEN - ETH_FCS_LEN;
-+      else
-+              ndev->max_mtu = JUMBO_FRAME_SIZE_V2 - ETH_HLEN - ETH_FCS_LEN;
- 
-       /* supported features */
-       ndev->hw_features = NETIF_F_SG;
-@@ -2453,6 +2466,11 @@ int pfe_eth_init(struct pfe *pfe)
-       cbus_gpi_base[0] = EGPI1_BASE_ADDR;
-       cbus_gpi_base[1] = EGPI2_BASE_ADDR;
- 
-+      if (fsl_guts_get_svr() == LS1012A_REV_1_0)
-+              pfe_errata_a010897 = true;
-+      else
-+              pfe_errata_a010897 = false;
-+
-       for (ii = 0; ii < NUM_GEMAC_SUPPORT; ii++) {
-               err = pfe_eth_init_one(pfe, ii);
-               if (err)
---- a/drivers/staging/fsl_ppfe/pfe_eth.h
-+++ b/drivers/staging/fsl_ppfe/pfe_eth.h
-@@ -85,7 +85,8 @@ struct ls1012a_pfe_platform_data {
- #define EMAC_TXQ_CNT  16
- #define EMAC_TXQ_DEPTH        (HIF_TX_DESC_NT)
- 
--#define JUMBO_FRAME_SIZE      10258
-+#define JUMBO_FRAME_SIZE_V1   1900
-+#define JUMBO_FRAME_SIZE_V2   10258
- /*
-  * Client Tx queue threshold, for txQ flush condition.
-  * It must be smaller than the queue size (in case we ever change it in the
---- a/drivers/staging/fsl_ppfe/pfe_hal.c
-+++ b/drivers/staging/fsl_ppfe/pfe_hal.c
-@@ -19,6 +19,9 @@
- #include "pfe_mod.h"
- #include "pfe/pfe.h"
- 
-+/* A-010897: Jumbo frame is not supported */
-+extern bool pfe_errata_a010897;
-+
- #define PFE_RCR_MAX_FL_MASK   0xC000FFFF
- 
- void *cbus_base_addr;
-@@ -1102,7 +1105,12 @@ void gemac_set_config(void *base, struct
-       /*GEMAC config taken from VLSI */
-       writel(0x00000004, base + EMAC_TFWR_STR_FWD);
-       writel(0x00000005, base + EMAC_RX_SECTION_FULL);
--      writel(0x00003fff, base + EMAC_TRUNC_FL);
-+
-+      if (pfe_errata_a010897)
-+              writel(0x0000076c, base + EMAC_TRUNC_FL);
-+      else
-+              writel(0x00003fff, base + EMAC_TRUNC_FL);
-+
-       writel(0x00000030, base + EMAC_TX_SECTION_EMPTY);
-       writel(0x00000000, base + EMAC_MIB_CTRL_STS_REG);
-