kernel: delete Linux 5.4 config and patches

[openwrt/staging/chunkeey.git] / target / linux / layerscape / patches-5.4 / 701-net-0384-net-mscc-ocelot-make-phy_mode-a-member-of-the-common.patch

diff --git a/target/linux/layerscape/patches-5.4/701-net-0384-net-mscc-ocelot-make-phy_mode-a-member-of-the-common.patch b/target/linux/layerscape/patches-5.4/701-net-0384-net-mscc-ocelot-make-phy_mode-a-member-of-the-common.patch
deleted file mode 100644 (file)
index 662ad10..0000000
--- a/target/linux/layerscape/patches-5.4/701-net-0384-net-mscc-ocelot-make-phy_mode-a-member-of-the-common.patch
+++ /dev/null
@@ -1,85 +0,0 @@
-From 1737de8045838dcf3c7713c940eb1582810a319f Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Mon, 16 Dec 2019 15:07:20 +0200
-Subject: [PATCH] net: mscc: ocelot: make phy_mode a member of the common
- struct ocelot_port
-
-The Ocelot switchdev driver and the Felix DSA one need it for different
-reasons. Felix (or at least the VSC9959 instantiation in NXP LS1028A) is
-integrated with the traditional NXP Layerscape PCS design which does not
-support runtime configuration of SerDes protocol. So it needs to
-pre-validate the phy-mode from the device tree and prevent PHYLINK from
-attempting to change it. For this, it needs to cache it in a private
-variable.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
----
- drivers/net/ethernet/mscc/ocelot.c       | 7 ++++---
- drivers/net/ethernet/mscc/ocelot.h       | 1 -
- drivers/net/ethernet/mscc/ocelot_board.c | 4 ++--
- include/soc/mscc/ocelot.h                | 2 ++
- 4 files changed, 8 insertions(+), 6 deletions(-)
-
---- a/drivers/net/ethernet/mscc/ocelot.c
-+++ b/drivers/net/ethernet/mscc/ocelot.c
-@@ -500,13 +500,14 @@ EXPORT_SYMBOL(ocelot_port_enable);
- static int ocelot_port_open(struct net_device *dev)
- {
-       struct ocelot_port_private *priv = netdev_priv(dev);
--      struct ocelot *ocelot = priv->port.ocelot;
-+      struct ocelot_port *ocelot_port = &priv->port;
-+      struct ocelot *ocelot = ocelot_port->ocelot;
-       int port = priv->chip_port;
-       int err;
- 
-       if (priv->serdes) {
-               err = phy_set_mode_ext(priv->serdes, PHY_MODE_ETHERNET,
--                                     priv->phy_mode);
-+                                     ocelot_port->phy_mode);
-               if (err) {
-                       netdev_err(dev, "Could not set mode of SerDes\n");
-                       return err;
-@@ -514,7 +515,7 @@ static int ocelot_port_open(struct net_d
-       }
- 
-       err = phy_connect_direct(dev, priv->phy, &ocelot_port_adjust_link,
--                               priv->phy_mode);
-+                               ocelot_port->phy_mode);
-       if (err) {
-               netdev_err(dev, "Could not attach to PHY\n");
-               return err;
---- a/drivers/net/ethernet/mscc/ocelot.h
-+++ b/drivers/net/ethernet/mscc/ocelot.h
-@@ -70,7 +70,6 @@ struct ocelot_port_private {
- 
-       u8 vlan_aware;
- 
--      phy_interface_t phy_mode;
-       struct phy *serdes;
- 
-       struct ocelot_port_tc tc;
---- a/drivers/net/ethernet/mscc/ocelot_board.c
-+++ b/drivers/net/ethernet/mscc/ocelot_board.c
-@@ -412,9 +412,9 @@ static int mscc_ocelot_probe(struct plat
-               if (phy_mode < 0)
-                       phy_mode = PHY_INTERFACE_MODE_NA;
- 
--              priv->phy_mode = phy_mode;
-+              ocelot_port->phy_mode = phy_mode;
- 
--              switch (priv->phy_mode) {
-+              switch (ocelot_port->phy_mode) {
-               case PHY_INTERFACE_MODE_NA:
-                       continue;
-               case PHY_INTERFACE_MODE_SGMII:
---- a/include/soc/mscc/ocelot.h
-+++ b/include/soc/mscc/ocelot.h
-@@ -425,6 +425,8 @@ struct ocelot_port {
-       u8                              ptp_cmd;
-       struct sk_buff_head             tx_skbs;
-       u8                              ts_id;
-+
-+      phy_interface_t                 phy_mode;
- };
- 
- struct ocelot {