--- /dev/null
+diff -urN linux.old/drivers/net/b44.c linux.dev/drivers/net/b44.c
+--- linux.old/drivers/net/b44.c 2006-02-12 13:49:59.000000000 +0100
++++ linux.dev/drivers/net/b44.c 2006-03-06 22:37:14.000000000 +0100
+@@ -1,7 +1,9 @@
+ /* b44.c: Broadcom 4400 device driver.
+ *
+ * Copyright (C) 2002 David S. Miller (davem@redhat.com)
+- * Fixed by Pekka Pietikainen (pp@ee.oulu.fi)
++ * Copyright (C) 2004 Pekka Pietikainen (pp@ee.oulu.fi)
++ * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
++ * Copyright (C) 2006 Felix Fietkau (nbd@openwrt.org)
+ *
+ * Distribute under GPL.
+ */
+@@ -25,6 +27,41 @@
+
+ #include "b44.h"
+
++#include <typedefs.h>
++#include <bcmdevs.h>
++#include <bcmutils.h>
++#include <osl.h>
++#include <bcmutils.h>
++#include <bcmnvram.h>
++#include <sbconfig.h>
++#include <sbchipc.h>
++#include <sflash.h>
++
++#ifdef CONFIG_BCM947XX
++#define atoi(str) simple_strtoul(((str != NULL) ? str : ""), NULL, 0)
++
++static inline void e_aton(char *str, char *dest)
++{
++ int i = 0;
++ u16 *d = (u16 *) dest;
++
++ if (str == NULL) {
++ memset(dest, 0, 6);
++ return;
++ }
++
++ for (;;) {
++ dest[i++] = (char) simple_strtoul(str, NULL, 16);
++ str += 2;
++ if (!*str++ || i == 6)
++ break;
++ }
++}
++
++static int instance = 0;
++#endif
++
++
+ #define DRV_MODULE_NAME "b44"
+ #define PFX DRV_MODULE_NAME ": "
+ #define DRV_MODULE_VERSION "0.93"
+@@ -75,7 +112,7 @@
+ DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
+
+ MODULE_AUTHOR("David S. Miller (davem@redhat.com)");
+-MODULE_DESCRIPTION("Broadcom 4400 10/100 PCI ethernet driver");
++MODULE_DESCRIPTION("Broadcom 4400/47xx 10/100 PCI ethernet driver");
+ MODULE_LICENSE("GPL");
+ MODULE_PARM(b44_debug, "i");
+ MODULE_PARM_DESC(b44_debug, "B44 bitmapped debugging message enable value");
+@@ -89,6 +126,8 @@
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
+ { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BCM4401B1,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
++ { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BCM4713,
++ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
+ { } /* terminate list with empty entry */
+ };
+
+@@ -113,11 +152,13 @@
+ udelay(10);
+ }
+ if (i == timeout) {
++#ifdef DEBUG
+ printk(KERN_ERR PFX "%s: BUG! Timeout waiting for bit %08x of register "
+ "%lx to %s.\n",
+ bp->dev->name,
+ bit, reg,
+ (clear ? "clear" : "set"));
++#endif
+ return -ENODEV;
+ }
+ return 0;
+@@ -236,6 +277,8 @@
+ udelay(1);
+ }
+
++static int b44_4713_instance;
++
+ static int ssb_core_unit(struct b44 *bp)
+ {
+ #if 0
+@@ -258,6 +301,9 @@
+ break;
+ };
+ #endif
++ if (bp->pdev->device == PCI_DEVICE_ID_BCM4713)
++ return b44_4713_instance++;
++ else
+ return 0;
+ }
+
+@@ -267,6 +313,28 @@
+ == SBTMSLOW_CLOCK);
+ }
+
++static inline void __b44_cam_read(struct b44 *bp, unsigned char *data, int index)
++{
++ u32 val;
++
++ bw32(B44_CAM_CTRL, (CAM_CTRL_READ |
++ (index << CAM_CTRL_INDEX_SHIFT)));
++
++ b44_wait_bit(bp, B44_CAM_CTRL, CAM_CTRL_BUSY, 100, 1);
++
++ val = br32(B44_CAM_DATA_LO);
++
++ data[2] = (val >> 24) & 0xFF;
++ data[3] = (val >> 16) & 0xFF;
++ data[4] = (val >> 8) & 0xFF;
++ data[5] = (val >> 0) & 0xFF;
++
++ val = br32(B44_CAM_DATA_HI);
++
++ data[0] = (val >> 8) & 0xFF;
++ data[1] = (val >> 0) & 0xFF;
++}
++
+ static void __b44_cam_write(struct b44 *bp, unsigned char *data, int index)
+ {
+ u32 val;
+@@ -287,7 +355,7 @@
+
+ static inline void __b44_disable_ints(struct b44 *bp)
+ {
+- bw32(B44_IMASK, 0);
++ bw32(B44_IMASK, ISTAT_TO); /* leave the timeout interrupt active */
+ }
+
+ static void b44_disable_ints(struct b44 *bp)
+@@ -303,14 +371,14 @@
+ bw32(B44_IMASK, bp->imask);
+ }
+
+-static int b44_readphy(struct b44 *bp, int reg, u32 *val)
++static int __b44_readphy(struct b44 *bp, int phy_addr, int reg, u32 *val)
+ {
+ int err;
+
+ bw32(B44_EMAC_ISTAT, EMAC_INT_MII);
+ bw32(B44_MDIO_DATA, (MDIO_DATA_SB_START |
+ (MDIO_OP_READ << MDIO_DATA_OP_SHIFT) |
+- (bp->phy_addr << MDIO_DATA_PMD_SHIFT) |
++ (phy_addr << MDIO_DATA_PMD_SHIFT) |
+ (reg << MDIO_DATA_RA_SHIFT) |
+ (MDIO_TA_VALID << MDIO_DATA_TA_SHIFT)));
+ err = b44_wait_bit(bp, B44_EMAC_ISTAT, EMAC_INT_MII, 100, 0);
+@@ -319,23 +387,42 @@
+ return err;
+ }
+
+-static int b44_writephy(struct b44 *bp, int reg, u32 val)
++static int b44_readphy(struct b44 *bp, int reg, u32 *val)
++{
++ if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
++ return 0;
++
++ return __b44_readphy(bp, bp->phy_addr, reg, val);
++}
++
++static int __b44_writephy(struct b44 *bp, int phy_addr, int reg, u32 val)
+ {
+ bw32(B44_EMAC_ISTAT, EMAC_INT_MII);
+ bw32(B44_MDIO_DATA, (MDIO_DATA_SB_START |
+ (MDIO_OP_WRITE << MDIO_DATA_OP_SHIFT) |
+- (bp->phy_addr << MDIO_DATA_PMD_SHIFT) |
++ (phy_addr << MDIO_DATA_PMD_SHIFT) |
+ (reg << MDIO_DATA_RA_SHIFT) |
+ (MDIO_TA_VALID << MDIO_DATA_TA_SHIFT) |
+ (val & MDIO_DATA_DATA)));
+ return b44_wait_bit(bp, B44_EMAC_ISTAT, EMAC_INT_MII, 100, 0);
+ }
+
++static int b44_writephy(struct b44 *bp, int reg, u32 val)
++{
++ if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
++ return 0;
++
++ return __b44_writephy(bp, bp->phy_addr, reg, val);
++}
++
+ static int b44_phy_reset(struct b44 *bp)
+ {
+ u32 val;
+ int err;
+
++ if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
++ return 0;
++
+ err = b44_writephy(bp, MII_BMCR, BMCR_RESET);
+ if (err)
+ return err;
+@@ -406,6 +493,23 @@
+ u32 val;
+ int err;
+
++
++ /*
++ * workaround for bad hardware design in Linksys WAP54G v1.0
++ * see https://dev.openwrt.org/ticket/146
++ * check and reset bit "isolate"
++ */
++ if ((bp->pdev->device == PCI_DEVICE_ID_BCM4713) &&
++ (atoi(nvram_get("boardnum")) == 2) &&
++ (__b44_readphy(bp, 0, MII_BMCR, &val) == 0) &&
++ (val & BMCR_ISOLATE) &&
++ (__b44_writephy(bp, 0, MII_BMCR, val & ~BMCR_ISOLATE) != 0)) {
++ printk(KERN_WARNING PFX "PHY: cannot reset MII transceiver isolate bit.\n");
++ }
++
++ if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
++ return 0;
++
+ if ((err = b44_readphy(bp, B44_MII_ALEDCTRL, &val)) != 0)
+ goto out;
+ if ((err = b44_writephy(bp, B44_MII_ALEDCTRL,
+@@ -498,6 +602,19 @@
+ {
+ u32 bmsr, aux;
+
++ if (bp->phy_addr == B44_PHY_ADDR_NO_PHY) {
++ bp->flags |= B44_FLAG_100_BASE_T;
++ bp->flags |= B44_FLAG_FULL_DUPLEX;
++ if (!netif_carrier_ok(bp->dev)) {
++ u32 val = br32(B44_TX_CTRL);
++ val |= TX_CTRL_DUPLEX;
++ bw32(B44_TX_CTRL, val);
++ netif_carrier_on(bp->dev);
++ b44_link_report(bp);
++ }
++ return;
++ }
++
+ if (!b44_readphy(bp, MII_BMSR, &bmsr) &&
+ !b44_readphy(bp, B44_MII_AUXCTRL, &aux) &&
+ (bmsr != 0xffff)) {
+@@ -765,6 +882,25 @@
+ return received;
+ }
+
++
++static inline void __b44_reset(struct b44 *bp)
++{
++ spin_lock_irq(&bp->lock);
++ b44_halt(bp);
++ b44_init_rings(bp);
++ b44_init_hw(bp);
++ spin_unlock_irq(&bp->lock);
++
++ b44_enable_ints(bp);
++ netif_wake_queue(bp->dev);
++}
++
++static inline void __b44_set_timeout(struct b44 *bp, int timeout)
++{
++ /* Set timeout for Rx to two seconds after the last Tx */
++ bw32(B44_GPTIMER, timeout ? 2 * 125000000 : 0);
++}
++
+ static int b44_poll(struct net_device *netdev, int *budget)
+ {
+ struct b44 *bp = netdev->priv;
+@@ -772,13 +908,13 @@
+
+ spin_lock_irq(&bp->lock);
+
+- if (bp->istat & (ISTAT_TX | ISTAT_TO)) {
++ if (bp->istat & ISTAT_TX) {
+ /* spin_lock(&bp->tx_lock); */
+ b44_tx(bp);
+ /* spin_unlock(&bp->tx_lock); */
+ }
+ spin_unlock_irq(&bp->lock);
+-
++
+ done = 1;
+ if (bp->istat & ISTAT_RX) {
+ int orig_budget = *budget;
+@@ -796,24 +932,18 @@
+ done = 0;
+ }
+
+- if (bp->istat & ISTAT_ERRORS) {
+- spin_lock_irq(&bp->lock);
+- b44_halt(bp);
+- b44_init_rings(bp);
+- b44_init_hw(bp);
+- netif_wake_queue(bp->dev);
+- spin_unlock_irq(&bp->lock);
+- done = 1;
+- }
+-
+ if (done) {
+ netif_rx_complete(netdev);
+ b44_enable_ints(bp);
+ }
+
++ if ((bp->core_unit == 1) && (bp->istat & (ISTAT_TX | ISTAT_RX)))
++ __b44_set_timeout(bp, (bp->istat & ISTAT_TX) ? 1 : 0);
++
+ return (done ? 0 : 1);
+ }
+
++
+ static irqreturn_t b44_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+ {
+ struct net_device *dev = dev_id;
+@@ -832,6 +962,18 @@
+ */
+ istat &= imask;
+ if (istat) {
++ /* Workaround for the WL-500g WAN port hang */
++ if (istat & (ISTAT_TO | ISTAT_ERRORS)) {
++ /*
++ * no rx before the watchdog timeout
++ * reset the interface
++ */
++ __b44_reset(bp);
++ }
++
++ if ((bp->core_unit == 1) && (bp->istat & (ISTAT_TX | ISTAT_RX)))
++ __b44_set_timeout(bp, (bp->istat & ISTAT_TX) ? 1 : 0);
++
+ handled = 1;
+ if (netif_rx_schedule_prep(dev)) {
+ /* NOTE: These writes are posted by the readback of
+@@ -848,6 +990,7 @@
+ bw32(B44_ISTAT, istat);
+ br32(B44_ISTAT);
+ }
++
+ spin_unlock_irqrestore(&bp->lock, flags);
+ return IRQ_RETVAL(handled);
+ }
+@@ -859,16 +1002,7 @@
+ printk(KERN_ERR PFX "%s: transmit timed out, resetting\n",
+ dev->name);
+
+- spin_lock_irq(&bp->lock);
+-
+- b44_halt(bp);
+- b44_init_rings(bp);
+- b44_init_hw(bp);
+-
+- spin_unlock_irq(&bp->lock);
+-
+- b44_enable_ints(bp);
+-
++ __b44_reset(bp);
+ netif_wake_queue(dev);
+ }
+
+@@ -1092,6 +1226,8 @@
+ /* bp->lock is held. */
+ static void b44_chip_reset(struct b44 *bp)
+ {
++ unsigned int sb_clock;
++
+ if (ssb_is_core_up(bp)) {
+ bw32(B44_RCV_LAZY, 0);
+ bw32(B44_ENET_CTRL, ENET_CTRL_DISABLE);
+@@ -1105,9 +1241,10 @@
+ bw32(B44_DMARX_CTRL, 0);
+ bp->rx_prod = bp->rx_cons = 0;
+ } else {
+- ssb_pci_setup(bp, (bp->core_unit == 0 ?
+- SBINTVEC_ENET0 :
+- SBINTVEC_ENET1));
++ /*if (bp->pdev->device != PCI_DEVICE_ID_BCM4713)*/
++ ssb_pci_setup(bp, (bp->core_unit == 0 ?
++ SBINTVEC_ENET0 :
++ SBINTVEC_ENET1));
+ }
+
+ ssb_core_reset(bp);
+@@ -1115,6 +1252,11 @@
+ b44_clear_stats(bp);
+
+ /* Make PHY accessible. */
++ if (bp->pdev->device == PCI_DEVICE_ID_BCM4713)
++ sb_clock = 100000000; /* 100 MHz */
++ else
++ sb_clock = 62500000; /* 62.5 MHz */
++
+ bw32(B44_MDIO_CTRL, (MDIO_CTRL_PREAMBLE |
+ (0x0d & MDIO_CTRL_MAXF_MASK)));
+ br32(B44_MDIO_CTRL);
+@@ -1215,11 +1357,13 @@
+ struct b44 *bp = dev->priv;
+ int err;
+
++ netif_carrier_off(dev);
++
+ err = b44_alloc_consistent(bp);
+ if (err)
+ return err;
+
+- err = request_irq(dev->irq, b44_interrupt, SA_SHIRQ, dev->name, dev);
++ err = request_irq(dev->irq, b44_interrupt, SA_SHIRQ|SA_NET_RANDOM, dev->name, dev);
+ if (err)
+ goto err_out_free;
+
+@@ -1235,9 +1379,10 @@
+ bp->timer.expires = jiffies + HZ;
+ bp->timer.data = (unsigned long) bp;
+ bp->timer.function = b44_timer;
+- add_timer(&bp->timer);
++ b44_timer((unsigned long) bp);
+
+ b44_enable_ints(bp);
++ netif_start_queue(dev);
+
+ return 0;
+
+@@ -1628,7 +1773,7 @@
+ u32 mii_regval;
+
+ spin_lock_irq(&bp->lock);
+- err = b44_readphy(bp, data->reg_num & 0x1f, &mii_regval);
++ err = __b44_readphy(bp, data->phy_id & 0x1f, data->reg_num & 0x1f, &mii_regval);
+ spin_unlock_irq(&bp->lock);
+
+ data->val_out = mii_regval;
+@@ -1641,7 +1786,7 @@
+ return -EPERM;
+
+ spin_lock_irq(&bp->lock);
+- err = b44_writephy(bp, data->reg_num & 0x1f, data->val_in);
++ err = __b44_writephy(bp, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in);
+ spin_unlock_irq(&bp->lock);
+
+ return err;
+@@ -1668,21 +1813,52 @@
+ static int __devinit b44_get_invariants(struct b44 *bp)
+ {
+ u8 eeprom[128];
++ u8 buf[32];
+ int err;
++ unsigned long flags;
+
+- err = b44_read_eeprom(bp, &eeprom[0]);
+- if (err)
+- goto out;
+-
+- bp->dev->dev_addr[0] = eeprom[79];
+- bp->dev->dev_addr[1] = eeprom[78];
+- bp->dev->dev_addr[2] = eeprom[81];
+- bp->dev->dev_addr[3] = eeprom[80];
+- bp->dev->dev_addr[4] = eeprom[83];
+- bp->dev->dev_addr[5] = eeprom[82];
+-
+- bp->phy_addr = eeprom[90] & 0x1f;
+- bp->mdc_port = (eeprom[90] >> 14) & 0x1;
++ if (bp->pdev->device == PCI_DEVICE_ID_BCM4713) {
++#ifdef CONFIG_BCM947XX
++ sprintf(buf, "et%dmacaddr", instance - 1);
++ e_aton(nvram_get(buf), bp->dev->dev_addr);
++
++ sprintf(buf, "et%dphyaddr", instance - 1);
++ bp->phy_addr = B44_PHY_ADDR_NO_PHY;
++#else
++ /*
++ * BCM47xx boards don't have a EEPROM. The MAC is stored in
++ * a NVRAM area somewhere in the flash memory. As we don't
++ * know the location and/or the format of the NVRAM area
++ * here, we simply rely on the bootloader to write the
++ * MAC into the CAM.
++ */
++ spin_lock_irqsave(&bp->lock, flags);
++ __b44_cam_read(bp, bp->dev->dev_addr, 0);
++ spin_unlock_irqrestore(&bp->lock, flags);
++
++ /*
++ * BCM47xx boards don't have a PHY. Usually there is a switch
++ * chip with multiple PHYs connected to the PHY port.
++ */
++ bp->phy_addr = B44_PHY_ADDR_NO_PHY;
++#endif
++ bp->dma_offset = 0;
++ } else {
++ err = b44_read_eeprom(bp, &eeprom[0]);
++ if (err)
++ return err;
++
++ bp->dev->dev_addr[0] = eeprom[79];
++ bp->dev->dev_addr[1] = eeprom[78];
++ bp->dev->dev_addr[2] = eeprom[81];
++ bp->dev->dev_addr[3] = eeprom[80];
++ bp->dev->dev_addr[4] = eeprom[83];
++ bp->dev->dev_addr[5] = eeprom[82];
++
++ bp->phy_addr = eeprom[90] & 0x1f;
++ bp->dma_offset = SB_PCI_DMA;
++ bp->mdc_port = (eeprom[90] >> 14) & 0x1;
++ }
+
+ /* With this, plus the rx_header prepended to the data by the
+ * hardware, we'll land the ethernet header on a 2-byte boundary.
+@@ -1692,13 +1868,12 @@
+ bp->imask = IMASK_DEF;
+
+ bp->core_unit = ssb_core_unit(bp);
+- bp->dma_offset = ssb_get_addr(bp, SBID_PCI_DMA, 0);
+
+ /* XXX - really required?
+ bp->flags |= B44_FLAG_BUGGY_TXPTR;
+ */
+-out:
+- return err;
++
++ return 0;
+ }
+
+ static int __devinit b44_init_one(struct pci_dev *pdev,
+@@ -1710,6 +1885,10 @@
+ struct b44 *bp;
+ int err, i;
+
++#ifdef CONFIG_BCM947XX
++ instance++;
++#endif
++
+ if (b44_version_printed++ == 0)
+ printk(KERN_INFO "%s", version);
+
+@@ -1819,11 +1998,17 @@
+
+ pci_save_state(bp->pdev, bp->pci_cfg_state);
+
+- printk(KERN_INFO "%s: Broadcom 4400 10/100BaseT Ethernet ", dev->name);
++ printk(KERN_INFO "%s: Broadcom %s 10/100BaseT Ethernet ", dev->name,
++ (pdev->device == PCI_DEVICE_ID_BCM4713) ? "47xx" : "4400");
+ for (i = 0; i < 6; i++)
+ printk("%2.2x%c", dev->dev_addr[i],
+ i == 5 ? '\n' : ':');
+
++ /* Initialize phy */
++ spin_lock_irq(&bp->lock);
++ b44_chip_reset(bp);
++ spin_unlock_irq(&bp->lock);
++
+ return 0;
+
+ err_out_iounmap:
+diff -urN linux.old/drivers/net/b44.h linux.dev/drivers/net/b44.h
+--- linux.old/drivers/net/b44.h 2006-02-12 13:49:59.000000000 +0100
++++ linux.dev/drivers/net/b44.h 2006-01-24 20:52:08.000000000 +0100
+@@ -229,8 +229,6 @@
+ #define SBIPSFLAG_IMASK4 0x3f000000 /* Which sbflags --> mips interrupt 4 */
+ #define SBIPSFLAG_ISHIFT4 24
+ #define B44_SBTPSFLAG 0x0F18UL /* SB Target Port OCP Slave Flag */
+-#define SBTPS_NUM0_MASK 0x0000003f
+-#define SBTPS_F0EN0 0x00000040
+ #define B44_SBADMATCH3 0x0F60UL /* SB Address Match 3 */
+ #define B44_SBADMATCH2 0x0F68UL /* SB Address Match 2 */
+ #define B44_SBADMATCH1 0x0F70UL /* SB Address Match 1 */
+@@ -461,6 +459,8 @@
+ };
+
+ #define B44_MCAST_TABLE_SIZE 32
++#define B44_PHY_ADDR_NO_PHY 30
++#define B44_MDC_RATIO 5000000
+
+ /* SW copy of device statistics, kept up to date by periodic timer
+ * which probes HW values. Must have same relative layout as HW
+diff -urN linux.old/include/linux/pci_ids.h linux.dev/include/linux/pci_ids.h
+--- linux.old/include/linux/pci_ids.h 2006-02-12 13:49:59.000000000 +0100
++++ linux.dev/include/linux/pci_ids.h 2006-01-24 20:52:08.000000000 +0100
+@@ -1735,6 +1735,7 @@
+ #define PCI_DEVICE_ID_TIGON3_5901_2 0x170e
+ #define PCI_DEVICE_ID_BCM4401 0x4401
+ #define PCI_DEVICE_ID_BCM4401B0 0x4402
++#define PCI_DEVICE_ID_BCM4713 0x4713
+
+ #define PCI_VENDOR_ID_ENE 0x1524
+ #define PCI_DEVICE_ID_ENE_1211 0x1211
projects / openwrt / svn-archive / openwrt.git / blobdiff