mediatek: add support for the GL.iNet GL-MT3000

[openwrt/staging/hauke.git] / target / linux / mediatek / dts / mt7981b-glinet-gl-mt3000.dts

diff --git a/target/linux/mediatek/dts/mt7981b-glinet-gl-mt3000.dts b/target/linux/mediatek/dts/mt7981b-glinet-gl-mt3000.dts
new file mode 100644 (file)
index 0000000..d916ee4
--- /dev/null
+++ b/target/linux/mediatek/dts/mt7981b-glinet-gl-mt3000.dts
@@ -0,0 +1,240 @@
+/dts-v1/;
+
+#include "mt7981.dtsi"
+
+/ {
+       model = "GL.iNet GL-MT3000";
+       compatible = "glinet,gl-mt3000", "mediatek,mt7981";
+
+       aliases {
+               led-boot = &led_lightblue;
+               led-failsafe = &led_lightblue;
+               led-running = &led_white;
+               led-upgrade = &led_lightblue;
+               serial0 = &uart0;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
+       gpio-keys {
+               compatible = "gpio-keys";
+
+               reset {
+                       label = "reset";
+                       linux,code = <KEY_RESTART>;
+                       gpios = <&pio 1 GPIO_ACTIVE_LOW>;
+               };
+
+               mode {
+                       label = "mode";
+                       linux,input-type = <EV_SW>;
+                       linux,code = <BTN_0>;
+                       gpios = <&pio 0 GPIO_ACTIVE_HIGH>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               led_lightblue: led@0 {
+                       label = "blue:run";
+                       gpios = <&pio 31 GPIO_ACTIVE_LOW>;
+               };
+
+               led_white: led@1 {
+                       label = "white:system";
+                       gpios = <&pio 30 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       fan_5v: regulator-fan-5v {
+               compatible = "regulator-fixed";
+               regulator-name = "fan";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               gpio = <&pio 28 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+               regulator-boot-on;
+       };
+
+       usb_vbus: regulator-usb-vbus {
+               compatible = "regulator-fixed";
+               regulator-name = "usb_vbus";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               gpio = <&pio 12 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+               regulator-boot-on;
+       };
+};
+
+&uart0 {
+       status = "okay";
+};
+
+&watchdog {
+       status = "okay";
+};
+
+&eth {
+       pinctrl-names = "default";
+       pinctrl-0 = <&mdio_pins>;
+
+       status = "okay";
+
+       gmac0: mac@0 {
+               compatible = "mediatek,eth-mac";
+               reg = <0>;
+               phy-mode = "2500base-x";
+               phy-handle = <&phy0>;
+               nvmem-cells = <&macaddr>;
+               nvmem-cell-names = "mac-address";
+       };
+
+       gmac1: mac@1 {
+               compatible = "mediatek,eth-mac";
+               reg = <1>;
+               phy-mode = "gmii";
+               phy-handle = <&int_gbe_phy>;
+               nvmem-cells = <&macaddr>;
+               nvmem-cell-names = "mac-address";
+               mac-address-increment = <1>;
+       };
+};
+
+&mdio_bus {
+       reset-gpios = <&pio 14 GPIO_ACTIVE_LOW>;
+       reset-delay-us = <600>;
+       reset-post-delay-us = <20000>;
+
+       phy0: ethernet-phy@5 {
+               reg = <5>;
+               compatible = "ethernet-phy-ieee802.3-c45";
+               phy-mode = "2500base-x";
+       };
+};
+
+&pwm {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pwm_pins>;
+
+       status = "okay";
+};
+
+&fan {
+       pwms = <&pwm 0 40000 0>;
+       fan-supply = <&fan_5v>;
+       interrupt-parent = <&pio>;
+       interrupts = <29 IRQ_TYPE_EDGE_RISING>;
+       status = "okay";
+};
+
+&spi0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&spi0_flash_pins>;
+       status = "okay";
+
+       spi_nand: flash@0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "spi-nand";
+               reg = <0>;
+               spi-max-frequency = <52000000>;
+
+               spi-cal-enable;
+               spi-cal-mode = "read-data";
+               spi-cal-datalen = <7>;
+               spi-cal-data = /bits/ 8 <0x53 0x50 0x49 0x4E 0x41 0x4E 0x44>;
+               spi-cal-addrlen = <5>;
+               spi-cal-addr = /bits/ 32 <0x0 0x0 0x0 0x0 0x0>;
+
+               spi-tx-buswidth = <4>;
+               spi-rx-buswidth = <4>;
+               mediatek,nmbm;
+               mediatek,bmt-max-ratio = <1>;
+               mediatek,bmt-max-reserved-blocks = <64>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "BL2";
+                               reg = <0x00000 0x0100000>;
+                               read-only;
+                       };
+
+                       partition@100000 {
+                               label = "u-boot-env";
+                               reg = <0x0100000 0x0080000>;
+                       };
+
+                       factory: partition@180000 {
+                               label = "Factory";
+                               reg = <0x180000 0x0200000>;
+                               read-only;
+
+                               compatible = "nvmem-cells";
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+
+                               macaddr: macaddr@a {
+                                       reg = <0xa 0x6>;
+                               };
+                       };
+
+                       partition@380000 {
+                               label = "FIP";
+                               reg = <0x380000 0x0200000>;
+                               read-only;
+                       };
+
+                       partition@580000 {
+                               label = "log";
+                               reg = <0x580000 0x0040000>;
+                       };
+
+                       partition@5c0000 {
+                               label = "ubi";
+                               reg = <0x5c0000 0xf640000>;
+                               compatible = "linux,ubi";
+                       };
+               };
+       };
+};
+
+&pio {
+       spi0_flash_pins: spi0-pins {
+               mux {
+                       function = "spi";
+                       groups = "spi0", "spi0_wp_hold";
+               };
+       };
+
+       pwm_pins: pwm0-pins {
+               mux {
+                       function = "pwm";
+                       groups = "pwm0_1";
+               };
+       };
+};
+
+&usb_phy {
+       status = "okay";
+};
+
+&xhci {
+       vbus-supply = <&usb_vbus>;
+
+       status = "okay";
+};
+
+&wifi {
+       mediatek,mtd-eeprom = <&factory 0x0>;
+
+       status = "okay";
+};