Revert "mediatek/filogic: add OpenWrt One support"
[openwrt/staging/pepe2k.git] / target / linux / mediatek / dts / mt7981b-openwrt-one.dts
diff --git a/target/linux/mediatek/dts/mt7981b-openwrt-one.dts b/target/linux/mediatek/dts/mt7981b-openwrt-one.dts
deleted file mode 100644 (file)
index b2223f8..0000000
+++ /dev/null
@@ -1,457 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-
-/dts-v1/;
-#include "mt7981.dtsi"
-
-/ {
-       model = "OpenWrt One";
-       compatible = "openwrt,one", "mediatek,mt7981";
-
-       aliases {
-               ethernet0 = &gmac0;
-               ethernet1 = &gmac1;
-               serial0 = &uart0;
-               led-boot = &led_status_white;
-               led-failsafe = &led_status_red;
-               led-running = &led_status_green;
-               led-upgrade = &led_status_green;
-       };
-
-       chosen {
-               stdout-path = "serial0:115200n8";
-               rootdisk = <&ubi_fit_volume>;
-       };
-
-       memory {
-               reg = <0 0x40000000 0 0x40000000>;
-       };
-
-       reg_3p3v: regulator-3p3v {
-               compatible = "regulator-fixed";
-               regulator-name = "fixed-3.3V";
-               regulator-min-microvolt = <3300000>;
-               regulator-max-microvolt = <3300000>;
-               regulator-boot-on;
-               regulator-always-on;
-       };
-
-       reg_5v: regulator-5v {
-               compatible = "regulator-fixed";
-               regulator-name = "fixed-5V";
-               regulator-min-microvolt = <5000000>;
-               regulator-max-microvolt = <5000000>;
-               regulator-boot-on;
-               regulator-always-on;
-       };
-
-       gpio-keys {
-               compatible = "gpio-keys";
-
-               user {
-                       label = "user";
-                       linux,code = <BTN_0>;
-                       gpios = <&pio 0 GPIO_ACTIVE_HIGH>;
-               };
-
-               reset {
-                       label = "reset";
-                       linux,code = <KEY_RESTART>;
-                       gpios = <&pio 1 GPIO_ACTIVE_LOW>;
-               };
-       };
-
-       pwm-leds {
-               compatible = "pwm-leds";
-
-               led_status_white: led-0 {
-                       color = <LED_COLOR_ID_WHITE>;
-                       function = LED_FUNCTION_STATUS;
-                       pwms = <&pwm 0 10000>;
-                       linux,default-trigger = "pattern";
-                       led-pattern = <0 500 25 500>;
-               };
-
-               led_status_green: led-1 {
-                       color = <LED_COLOR_ID_GREEN>;
-                       function = LED_FUNCTION_STATUS;
-                       pwms = <&pwm 1 10000>;
-               };
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-
-               led_status_red: led-0 {
-                       color = <LED_COLOR_ID_RED>;
-                       function = LED_FUNCTION_STATUS;
-                       gpios = <&pio 9 GPIO_ACTIVE_HIGH>;
-               };
-
-               led-1 {
-                       function = LED_FUNCTION_LAN;
-                       color = <LED_COLOR_ID_AMBER>;
-                       gpios = <&pio 34 GPIO_ACTIVE_LOW>;
-               };
-
-               led-2 {
-                       function = LED_FUNCTION_LAN;
-                       color = <LED_COLOR_ID_GREEN>;
-                       gpios = <&pio 35 GPIO_ACTIVE_LOW>;
-               };
-       };
-
-       gpio-export {
-               compatible = "gpio-export";
-
-                gpio-0 {
-                       gpio-export,name = "mikrobus-reset";
-                       gpio-export,output = <1>;
-                       gpios = <&pio 2 GPIO_ACTIVE_HIGH>;
-               };
-
-               gpio-1 {
-                       gpio-export,name = "watchdog-enable";
-                       gpio-export,output = <1>;
-                       gpios = <&pio 11 GPIO_ACTIVE_HIGH>;
-               };
-
-               gpio-2 {
-                       gpio-export,name = "usb-enable";
-                       gpio-export,output = <1>;
-                       gpios = <&pio 14 GPIO_ACTIVE_HIGH>;
-               };
-       };
-
-       gpio-watchdog {
-               compatible = "linux,wdt-gpio";
-               gpios = <&pio 8 GPIO_ACTIVE_LOW>;
-               hw_algo = "toggle";
-               hw_margin_ms = <25000>;
-               always-running;
-       };
-};
-
-&eth {
-       status = "okay";
-
-       gmac0: mac@0 {
-               compatible = "mediatek,eth-mac";
-               reg = <0>;
-               phy-handle = <&phy15>;
-               phy-mode = "2500base-x";
-               nvmem-cell-names = "mac-address";
-               nvmem-cells = <&macaddr_factory_4>;
-       };
-
-       gmac1: mac@1 {
-               compatible = "mediatek,eth-mac";
-               reg = <1>;
-               phy-mode = "gmii";
-               phy-handle = <&int_gbe_phy>;
-               nvmem-cell-names = "mac-address";
-               nvmem-cells = <&macaddr_factory_a>;
-       };
-};
-
-&mdio_bus {
-       phy15: phy@f {
-               reg = <0xf>;
-
-               airoha,pnswap-rx;
-
-               interrupt-parent = <&pio>;
-               interrupts = <38 IRQ_TYPE_EDGE_FALLING>;
-               reset-gpios = <&pio 39 GPIO_ACTIVE_LOW>;
-               reset-assert-us = <10000>;
-               reset-deassert-us = <20000>;
-
-               phy-mode = "2500base-x";
-               full-duplex;
-               pause;
-
-               leds {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-
-                       led@0 {
-                               reg = <0>;
-                               function = LED_FUNCTION_WAN;
-                               color = <LED_COLOR_ID_AMBER>;
-                       };
-
-                       led@1 {
-                               reg = <1>;
-                               function = LED_FUNCTION_WAN;
-                               color = <LED_COLOR_ID_GREEN>;
-                       };
-               };
-       };
-};
-
-&crypto {
-       status = "okay";
-};
-
-&pio {
-       spi0_flash_pins: spi0-pins {
-               mux {
-                       function = "spi";
-                       groups = "spi0", "spi0_wp_hold";
-               };
-
-               conf-pu {
-                       pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
-                       drive-strength = <MTK_DRIVE_8mA>;
-                       bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
-               };
-
-               conf-pd {
-                       pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
-                       drive-strength = <MTK_DRIVE_8mA>;
-                       bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
-               };
-       };
-
-       spi1_flash_pins: spi1-pins {
-               mux {
-                       function = "spi";
-                       groups = "spi1_1";
-               };
-
-               conf-pu {
-                       pins = "SPI1_CS";
-                       drive-strength = <MTK_DRIVE_8mA>;
-                       bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
-               };
-
-               conf-pd {
-                       pins = "SPI1_CLK", "SPI1_MOSI", "SPI1_MISO";
-                       drive-strength = <MTK_DRIVE_8mA>;
-                       bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
-               };
-       };
-
-       spi2_flash_pins: spi2-pins {
-               mux {
-                       function = "spi";
-                       groups = "spi2";
-               };
-
-               conf-pu {
-                       pins = "SPI2_CS", "SPI2_WP";
-                       drive-strength = <MTK_DRIVE_8mA>;
-                       bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
-               };
-
-               conf-pd {
-                       pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
-                       drive-strength = <MTK_DRIVE_8mA>;
-                       bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
-               };
-       };
-
-       i2c_pins: i2c-pins {
-               mux {
-                       function = "i2c";
-                       groups = "i2c0_0";
-               };
-       };
-
-       uart2_pins: uart2-pins {
-               mux {
-                       function = "uart";
-                       groups = "uart2_0_tx_rx";
-               };
-       };
-
-       pwm_pins: pwm-pins {
-               mux {
-                       function = "pwm";
-                       groups = "pwm0_0", "pwm1_1";
-               };
-       };
-
-       pcie_pins: pcie-pins {
-               mux {
-                       function = "pcie";
-                       groups = "pcie_pereset";
-               };
-       };
-};
-
-&pwm {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pwm_pins>;
-       status = "okay";
-};
-
-&i2c0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c_pins>;
-       status = "okay";
-
-       rtc@51 {
-               compatible = "nxp,pcf8563";
-               reg = <0x51>;
-       };
-};
-
-&spi0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&spi0_flash_pins>;
-       cs-gpios = <0>, <0>;
-       #address-cells = <1>;
-       #size-cells = <0>;
-       status = "okay";
-
-       flash@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "spi-nand";
-               reg = <1>;
-               spi-max-frequency = <52000000>;
-
-               spi-cal-enable;
-               spi-cal-mode = "read-data";
-               spi-cal-datalen = <7>;
-               spi-cal-data = /bits/ 8 <0x53 0x50 0x49 0x4E 0x41 0x4E 0x44>;
-               spi-cal-addrlen = <5>;
-               spi-cal-addr = /bits/ 32 <0x0 0x0 0x0 0x0 0x0>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "bl2";
-                               reg = <0x0 0x100000>;
-                               read-only;
-                       };
-
-                       partition@580000 {
-                               label = "ubi";
-                               reg = <0x100000 0x7F00000>;
-                               compatible = "linux,ubi";
-
-                               volumes {
-                                       ubi_fit_volume: ubi-volume-fit {
-                                               volname = "fit";
-                                       };
-                               };
-                       };
-               };
-       };
-};
-
-&spi1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&spi1_flash_pins>;
-       status = "okay";
-};
-
-&spi2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&spi2_flash_pins>;
-       status = "okay";
-
-       flash@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-
-               spi-max-frequency = <52000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "bl2-nor";
-                               reg = <0x00000 0x40000>;
-                       };
-
-                       partition@40000 {
-                               label = "factory";
-                               reg = <0x40000 0xc0000>;
-                               read-only;
-
-                               nvmem-layout {
-                                       compatible = "fixed-layout";
-                                       #address-cells = <1>;
-                                       #size-cells = <1>;
-
-                                       eeprom_factory_0: eeprom@0 {
-                                               reg = <0x0 0x1000>;
-                                       };
-
-                                       macaddr_factory_4: macaddr@4 {
-                                               compatible = "mac-base";
-                                               reg = <0x24 0x6>;
-                                               #nvmem-cell-cells = <1>;
-                                       };
-
-                                       macaddr_factory_a: macaddr@a {
-                                               compatible = "mac-base";
-                                               reg = <0x2a 0x6>;
-                                               #nvmem-cell-cells = <1>;
-                                       };
-                               };
-                       };
-
-                       partition@100000 {
-                               label = "fip-nor";
-                               reg = <0x100000 0x80000>;
-                       };
-
-                       partition@180000 {
-                               label = "recovery";
-                               reg = <0x180000 0xc80000>;
-                       };
-               };
-       };
-};
-
-&xhci {
-       phys = <&u2port0 PHY_TYPE_USB2>;
-       vusb33-supply = <&reg_3p3v>;
-       vbus-supply = <&reg_5v>;
-       mediatek,u3p-dis-msk = <0x01>;
-       status = "okay";
-};
-
-&uart0 {
-       status = "okay";
-};
-
-&uart2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart2_pins>;
-       status = "okay";
-};
-
-&usb_phy {
-       status = "okay";
-};
-
-&watchdog {
-       status = "okay";
-};
-
-&wifi {
-       nvmem-cells = <&eeprom_factory_0>;
-       nvmem-cell-names = "eeprom";
-       status = "okay";
-};
-
-&pcie {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pcie_pins>;
-       status = "okay";
-};
-
-&sgmiisys0 {
-       /delete-node/ mediatek,pnswap;
-};