board=$(board_name)
case "$board" in
- asus,tuf-ax4200)
+ acer,predator-w6)
+ key_path="/var/qcidata/data"
+ [ "$PHYNBR" = "0" ] && cat $key_path/2gMAC > /sys${DEVPATH}/macaddress
+ [ "$PHYNBR" = "1" ] && cat $key_path/6gMAC > /sys${DEVPATH}/macaddress
+ [ "$PHYNBR" = "2" ] && cat $key_path/5gMAC > /sys${DEVPATH}/macaddress
+ ;;
+ asus,rt-ax59u)
+ CI_UBIPART="UBI_DEV"
+ addr=$(mtd_get_mac_binary_ubi "Factory" 0x4)
+ # Originally, phy1 is phy0 mac with LA and 28th bits set. However, this would conflict
+ # addresses on multiple VIFs with the other radio when bit 28 is already set.
+ # Set LA and 28 bits and increment mac-address instead.
+ [ "$PHYNBR" = "1" ] && \
+ macaddr_setbit_la $(macaddr_setbit $(macaddr_add $addr 1) 28) > \
+ /sys${DEVPATH}/macaddress
+ ;;
+ asus,tuf-ax4200|\
+ asus,tuf-ax6000)
CI_UBIPART="UBI_DEV"
addr=$(mtd_get_mac_binary_ubi "Factory" 0x4)
# Originally, phy0 is phy1 mac with LA bit set. However, this would conflict
[ "$PHYNBR" = "1" ] && echo "$addr" > /sys${DEVPATH}/macaddress
;;
bananapi,bpi-r3)
- addr=$(macaddr_add $(cat /sys/class/net/eth0/address) 2)
- [ "$PHYNBR" = "0" ] && macaddr_unsetbit $addr 6 > /sys${DEVPATH}/macaddress
- [ "$PHYNBR" = "1" ] && macaddr_setbit $addr 6 > /sys${DEVPATH}/macaddress
+ addr=$(cat /sys/class/net/eth0/address)
+ [ "$PHYNBR" = "0" ] && macaddr_add $addr 2 > /sys${DEVPATH}/macaddress
+ [ "$PHYNBR" = "1" ] && macaddr_add $addr 3 > /sys${DEVPATH}/macaddress
+ ;;
+ cetron,ct3003)
+ addr=$(mtd_get_mac_binary "art" 0)
+ [ "$PHYNBR" = "0" ] && macaddr_add $addr 1 > /sys${DEVPATH}/macaddress
+ [ "$PHYNBR" = "1" ] && macaddr_setbit_la $(macaddr_add $addr 2) > /sys${DEVPATH}/macaddress
+ ;;
+ cmcc,rax3000m)
+ case "$(cmdline_get_var root)" in
+ /dev/mmc*)
+ addr=$(mmc_get_mac_binary factory 0xa)
+ ;;
+ *)
+ addr=$(mtd_get_mac_binary factory 0xa)
+ ;;
+ esac
+ [ "$PHYNBR" = "1" ] && echo "$addr" > /sys${DEVPATH}/macaddress
+ ;;
+ comfast,cf-e393ax)
+ addr=$(mtd_get_mac_binary "Factory" 0x8000)
+ [ "$PHYNBR" = "1" ] && macaddr_add $addr 1 > /sys${DEVPATH}/macaddress
+ ;;
+ cudy,re3000-v1)
+ addr=$(mtd_get_mac_binary bdinfo 0xde00)
+ [ "$PHYNBR" = "0" ] && echo "$addr" > /sys${DEVPATH}/macaddress
+ [ "$PHYNBR" = "1" ] && macaddr_setbit_la $(macaddr_add $addr 1) > /sys${DEVPATH}/macaddress
;;
cudy,wr3000-v1)
addr=$(mtd_get_mac_binary bdinfo 0xde00)
[ "$PHYNBR" = "0" ] && echo "$addr" > /sys${DEVPATH}/macaddress
[ "$PHYNBR" = "1" ] && macaddr_setbit_la $(macaddr_add $addr 1) > /sys${DEVPATH}/macaddress
;;
+ dlink,aquila-pro-ai-m30-a1)
+ addr=$(mtd_get_mac_binary "Odm" 0x81)
+ [ "$PHYNBR" = "1" ] && macaddr_add $addr 3 > /sys${DEVPATH}/macaddress
+ ;;
+ glinet,gl-mt6000|\
+ glinet,gl-x3000|\
+ glinet,gl-xe3000)
+ addr=$(mmc_get_mac_binary factory 0x04)
+ [ "$PHYNBR" = "0" ] && echo "$addr" > /sys${DEVPATH}/macaddress
+ [ "$PHYNBR" = "1" ] && macaddr_add $addr 1 > /sys${DEVPATH}/macaddress
+ ;;
+ h3c,magic-nx30-pro)
+ addr=$(mtd_get_mac_ascii pdt_data_1 ethaddr)
+ [ "$PHYNBR" = "0" ] && macaddr_add $addr 2 > /sys${DEVPATH}/macaddress
+ [ "$PHYNBR" = "1" ] && macaddr_add $addr 3 > /sys${DEVPATH}/macaddress
+ ;;
+ jcg,q30-pro|\
+ netcore,n60)
+ # Originally, phy1 is phy0 mac with LA bit set. However, this would conflict
+ # addresses on multiple VIFs with the other radio. Use label mac to set LA bit.
+ [ "$PHYNBR" = "1" ] && macaddr_setbit_la $(get_mac_label) > /sys${DEVPATH}/macaddress
+ ;;
+ jdcloud,re-cp-03)
+ [ "$PHYNBR" = "1" ] && mmc_get_mac_binary factory 0xa > /sys${DEVPATH}/macaddress
+ ;;
mercusys,mr90x-v1)
addr=$(get_mac_binary "/tmp/tp_data/default-mac" 0)
[ "$PHYNBR" = "0" ] && echo "$addr" > /sys${DEVPATH}/macaddress
[ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
[ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 3 > /sys${DEVPATH}/macaddress
;;
+ openembed,som7981)
+ [ "$PHYNBR" = "1" ] && cat /sys/class/net/eth0/address > /sys${DEVPATH}/macaddress
+ ;;
qihoo,360t7)
addr=$(mtd_get_mac_ascii factory lanMac)
[ "$PHYNBR" = "0" ] && macaddr_add $addr 2 > /sys${DEVPATH}/macaddress
[ "$PHYNBR" = "1" ] && macaddr_add $addr 3 > /sys${DEVPATH}/macaddress
;;
+ smartrg,sdg-8612|\
+ smartrg,sdg-8614|\
+ smartrg,sdg-8622|\
+ smartrg,sdg-8632)
+ addr=$(mmc_get_mac_ascii mfginfo MFG_MAC)
+ [ "$PHYNBR" = "0" ] && macaddr_add $addr 2 > /sys${DEVPATH}/macaddress
+ [ "$PHYNBR" = "1" ] && macaddr_add $addr 3 > /sys${DEVPATH}/macaddress
+ [ "$PHYNBR" = "2" ] && macaddr_add $addr 4 > /sys${DEVPATH}/macaddress
+ ;;
tplink,tl-xdr4288|\
tplink,tl-xdr6086|\
tplink,tl-xdr6088)
[ "$PHYNBR" = "0" ] && get_mac_label > /sys${DEVPATH}/macaddress
;;
- zyxel,ex5601-t0)
+ ubnt,unifi-6-plus)
+ addr=$(mtd_get_mac_binary EEPROM 0x6)
+ [ "$PHYNBR" = "0" ] && echo "$addr" > /sys${DEVPATH}/macaddress
+ [ "$PHYNBR" = "1" ] && macaddr_add $addr 1 > /sys${DEVPATH}/macaddress
+ ;;
+ routerich,ax3000|\
+ zbtlink,zbt-z8102ax|\
+ zbtlink,zbt-z8103ax|\
+ zyxel,ex5601-t0|\
+ zyxel,ex5601-t0-ubootmod)
addr=$(mtd_get_mac_binary "Factory" 0x4)
[ "$PHYNBR" = "1" ] && macaddr_add $addr 1 > /sys${DEVPATH}/macaddress
;;
+ zyxel,nwa50ax-pro)
+ hw_mac_addr="$(mtd_get_mac_binary mrd 0x1fff8)"
+ [ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress
+ [ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
+ ;;
esac