mediatek: bump to v4.4

[openwrt/svn-archive/archive.git] / target / linux / mediatek / patches / 0029-dt-bindings-Add-I2C-bindings-for-mt65xx-mt81xx.patch

diff --git a/target/linux/mediatek/patches/0029-dt-bindings-Add-I2C-bindings-for-mt65xx-mt81xx.patch b/target/linux/mediatek/patches/0029-dt-bindings-Add-I2C-bindings-for-mt65xx-mt81xx.patch
deleted file mode 100644 (file)
index 776942c..0000000
--- a/target/linux/mediatek/patches/0029-dt-bindings-Add-I2C-bindings-for-mt65xx-mt81xx.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From d1447a6815913823ef5e75d70efc6f08f288ee40 Mon Sep 17 00:00:00 2001
-From: Xudong Chen <xudong.chen@mediatek.com>
-Date: Wed, 6 May 2015 16:37:05 +0800
-Subject: [PATCH 29/76] dt-bindings: Add I2C bindings for mt65xx/mt81xx.
-
-Add devicetree bindings for Mediatek Soc I2C driver.
-
-Signed-off-by: Xudong Chen <xudong.chen@mediatek.com>
-Signed-off-by: Eddie Huang <eddie.huang@mediatek.com>
----
- .../devicetree/bindings/i2c/i2c-mt6577.txt         |   41 ++++++++++++++++++++
- 1 file changed, 41 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/i2c/i2c-mt6577.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt
-@@ -0,0 +1,41 @@
-+* Mediatek's I2C controller
-+
-+The Mediatek's I2C controller is used to interface with I2C devices.
-+
-+Required properties:
-+  - compatible: value should be either of the following.
-+      (a) "mediatek,mt6577-i2c", for i2c compatible with mt6577 i2c.
-+      (b) "mediatek,mt6589-i2c", for i2c compatible with mt6589 i2c.
-+      (c) "mediatek,mt8127-i2c", for i2c compatible with mt8127 i2c.
-+      (d) "mediatek,mt8135-i2c", for i2c compatible with mt8135 i2c.
-+      (e) "mediatek,mt8173-i2c", for i2c compatible with mt8173 i2c.
-+  - reg: physical base address of the controller and dma base, length of memory
-+    mapped region.
-+  - interrupts: interrupt number to the cpu.
-+  - clock-div: the fixed value for frequency divider of clock source in i2c
-+    module. Each IC may be different.
-+  - clocks: clock name from clock manager
-+  - clock-names: Must include "main" and "dma", if enable have-pmic need include
-+    "pmic" extra.
-+
-+Optional properties:
-+  - clock-frequency: Frequency in Hz of the bus when transfer, the default value
-+    is 100000.
-+  - mediatek,have-pmic: platform can control i2c form special pmic side.
-+    Only mt6589 and mt8135 support this feature.
-+  - mediatek,use-push-pull: IO config use push-pull mode.
-+
-+Example:
-+
-+      i2c0: i2c@1100d000 {
-+                      compatible = "mediatek,mt6577-i2c";
-+                      reg = <0x1100d000 0x70>,
-+                            <0x11000300 0x80>;
-+                      interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
-+                      clock-frequency = <400000>;
-+                      mediatek,have-pmic;
-+                      clock-div = <16>;
-+                      clocks = <&i2c0_ck>, <&ap_dma_ck>;
-+                      clock-names = "main", "dma";
-+      };
-+