mediatek: add v5.4 support

[openwrt/staging/blogic.git] / target / linux / mediatek / patches-5.4 / 0005-dts-mt7622-add-gsw.patch

diff --git a/target/linux/mediatek/patches-5.4/0005-dts-mt7622-add-gsw.patch b/target/linux/mediatek/patches-5.4/0005-dts-mt7622-add-gsw.patch
new file mode 100755 (executable)
index 0000000..26c17f2
--- /dev/null
+++ b/target/linux/mediatek/patches-5.4/0005-dts-mt7622-add-gsw.patch
@@ -0,0 +1,257 @@
+diff -urN a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+--- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts 2019-12-02 14:33:30.126586402 +0800
++++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts 2019-12-02 14:35:02.304005081 +0800
+@@ -53,6 +53,13 @@
+               };
+       };
+ 
++      gsw: gsw@0 {
++              compatible = "mediatek,mt753x";
++              mediatek,ethsys = <&ethsys>;
++              #address-cells = <1>;
++              #size-cells = <0>;
++      };
++
+       leds {
+               compatible = "gpio-leds";
+ 
+@@ -146,6 +153,36 @@
+       };
+ };
+ 
++&gsw {
++        mediatek,mdio = <&mdio>;
++        mediatek,portmap = "wllll";
++        mediatek,mdio_master_pinmux = <0>;
++        reset-gpios = <&pio 54 0>;
++        interrupt-parent = <&pio>;
++        interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
++        status = "okay";
++
++        port5: port@5 {
++                compatible = "mediatek,mt753x-port";
++                reg = <5>;
++                phy-mode = "rgmii";
++                fixed-link {
++                        speed = <1000>;
++                        full-duplex;
++                };
++        };
++
++        port6: port@6 {
++                compatible = "mediatek,mt753x-port";
++                reg = <6>;
++                phy-mode = "sgmii";
++                fixed-link {
++                        speed = <2500>;
++                        full-duplex;
++                };
++        };
++};
++
+ &i2c1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&i2c1_pins>;
+--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts     2020-01-12 19:21:53.000000000 +0800
++++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts     2020-01-15 15:36:50.987901563 +0800
+@@ -1,7 +1,6 @@
+ /*
+- * Copyright (c) 2017 MediaTek Inc.
+- * Author: Ming Huang <ming.huang@mediatek.com>
+- *       Sean Wang <sean.wang@mediatek.com>
++ * Copyright (c) 2018 MediaTek Inc.
++ * Author: Ryder Lee <ryder.lee@mediatek.com>
+  *
+  * SPDX-License-Identifier: (GPL-2.0 OR MIT)
+  */
+@@ -14,8 +13,8 @@
+ #include "mt6380.dtsi"
+ 
+ / {
+-      model = "MediaTek MT7622 RFB1 board";
+-      compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622";
++      model = "MT7622_MT7531 RFB";
++      compatible = "bananapi,bpi-r64", "mediatek,mt7622";
+ 
+       aliases {
+               serial0 = &uart0;
+@@ -23,7 +22,7 @@
+ 
+       chosen {
+               stdout-path = "serial0:115200n8";
+-              bootargs = "earlycon=uart8250,mmio32,0x11002000 swiotlb=512";
++              bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n1 swiotlb=512";
+       };
+ 
+       cpus {
+@@ -40,23 +39,45 @@
+ 
+       gpio-keys {
+               compatible = "gpio-keys";
+-              poll-interval = <100>;
+ 
+               factory {
+                       label = "factory";
+                       linux,code = <BTN_0>;
+-                      gpios = <&pio 0 0>;
++                      gpios = <&pio 0 GPIO_ACTIVE_HIGH>;
+               };
+ 
+               wps {
+                       label = "wps";
+                       linux,code = <KEY_WPS_BUTTON>;
+-                      gpios = <&pio 102 0>;
++                      gpios = <&pio 102 GPIO_ACTIVE_HIGH>;
++              };
++      };
++
++      gsw: gsw@0 {
++                compatible = "mediatek,mt753x";
++                mediatek,ethsys = <&ethsys>;
++                #address-cells = <1>;
++                #size-cells = <0>;
++        };
++
++      leds {
++              compatible = "gpio-leds";
++
++              green {
++                      label = "bpi-r64:pio:green";
++                      gpios = <&pio 89 GPIO_ACTIVE_HIGH>;
++                      default-state = "off";
++              };
++
++              red {
++                      label = "bpi-r64:pio:red";
++                      gpios = <&pio 88 GPIO_ACTIVE_HIGH>;
++                      default-state = "off";
+               };
+       };
+ 
+       memory {
+-              reg = <0 0x40000000 0 0x20000000>;
++              reg = <0 0x40000000 0 0x40000000>;
+       };
+ 
+       reg_1p8v: regulator-1p8v {
+@@ -101,27 +122,67 @@
+ };
+ 
+ &eth {
+-      pinctrl-names = "default";
+-      pinctrl-0 = <&eth_pins>;
+       status = "okay";
++      gmac0: mac@0 {
++              compatible = "mediatek,eth-mac";
++              reg = <0>;
++              phy-mode = "2500base-x";
++
++              fixed-link {
++                      speed = <2500>;
++                      full-duplex;
++                      pause;
++              };
++      };
+ 
+       gmac1: mac@1 {
+               compatible = "mediatek,eth-mac";
+               reg = <1>;
+-              phy-handle = <&phy5>;
++              phy-mode = "rgmii";
++
++              fixed-link {
++                      speed = <1000>;
++                      full-duplex;
++                      pause;
++              };
+       };
+ 
+-      mdio-bus {
++      mdio: mdio-bus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+-
+-              phy5: ethernet-phy@5 {
+-                      reg = <5>;
+-                      phy-mode = "sgmii";
+-              };
+       };
+ };
+ 
++&gsw {
++        mediatek,mdio = <&mdio>;
++        mediatek,portmap = "llllw";
++        mediatek,mdio_master_pinmux = <0>;
++        reset-gpios = <&pio 54 0>;
++        interrupt-parent = <&pio>;
++        interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
++        status = "okay";
++
++        port5: port@5 {
++                compatible = "mediatek,mt753x-port";
++                reg = <5>;
++                phy-mode = "rgmii";
++                fixed-link {
++                        speed = <1000>;
++                        full-duplex;
++                };
++        };
++
++        port6: port@6 {
++                compatible = "mediatek,mt753x-port";
++                reg = <6>;
++                phy-mode = "sgmii";
++                fixed-link {
++                        speed = <2500>;
++                        full-duplex;
++                };
++        };
++};    
++
+ &i2c1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&i2c1_pins>;
+@@ -185,15 +246,28 @@
+ 
+ &pcie {
+       pinctrl-names = "default";
+-      pinctrl-0 = <&pcie0_pins>;
++      pinctrl-0 = <&pcie0_pins>, <&pcie1_pins>;
+       status = "okay";
+ 
+       pcie@0,0 {
+               status = "okay";
+       };
++
++      pcie@1,0 {
++              status = "okay";
++      };
+ };
+ 
+ &pio {
++      /* Attention: GPIO 90 is used to switch between PCIe@1,0 and
++       * SATA functions. i.e. output-high: PCIe, output-low: SATA
++       */
++      asm_sel {
++              gpio-hog;
++              gpios = <90 GPIO_ACTIVE_HIGH>;
++              output-high;
++      };
++
+       /* eMMC is shared pin with parallel NAND */
+       emmc_pins_default: emmc-pins-default {
+               mux {
+@@ -460,11 +534,11 @@
+ };
+ 
+ &sata {
+-      status = "okay";
++      status = "disable";
+ };
+ 
+ &sata_phy {
+-      status = "okay";
++      status = "disable";
+ };
+ 
+ &spi0 {