mediatek: 6.6: drop backport patches

[openwrt/staging/981213.git] / target / linux / mediatek / patches-6.6 / 115-v6.5-arm64-dts-mt7622-declare-SPI-NAND-present-on-BPI-R64.patch

diff --git a/target/linux/mediatek/patches-6.6/115-v6.5-arm64-dts-mt7622-declare-SPI-NAND-present-on-BPI-R64.patch b/target/linux/mediatek/patches-6.6/115-v6.5-arm64-dts-mt7622-declare-SPI-NAND-present-on-BPI-R64.patch
deleted file mode 100644 (file)
index 5fc5531..0000000
--- a/target/linux/mediatek/patches-6.6/115-v6.5-arm64-dts-mt7622-declare-SPI-NAND-present-on-BPI-R64.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From d278f43f25beedfd0cb784d1dd0a9e7e8c8f123f Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Wed, 19 Apr 2023 20:15:53 +0100
-Subject: [PATCH] arm64: dts: mt7622: declare SPI-NAND present on BPI-R64
-
-The SPI-NOR node in the device tree of the BananaPi R64 has most likely
-been copied from the reference board's device tree even though the R64
-comes with an SPI-NAND chip rather than SPI-NOR.
-
-Setup the Serial NAND Flash Interface (SNFI) controller, enable
-hardware BCH error detection and correction engine and add the SPI-NAND
-chip including basic partitions,
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Link: https://lore.kernel.org/r/ZEA96dmaXqTpk8u8@makrotopia.org
-Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- .../dts/mediatek/mt7622-bananapi-bpi-r64.dts  | 38 ++++++++++++++++---
- 1 file changed, 33 insertions(+), 5 deletions(-)
-
---- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
-@@ -253,14 +253,42 @@
-       status = "disabled";
- };
- 
--&nor_flash {
--      pinctrl-names = "default";
--      pinctrl-0 = <&spi_nor_pins>;
--      status = "disabled";
-+&bch {
-+      status = "okay";
-+};
- 
-+&snfi {
-+      pinctrl-names = "default";
-+      pinctrl-0 = <&serial_nand_pins>;
-+      status = "okay";
-       flash@0 {
--              compatible = "jedec,spi-nor";
-+              compatible = "spi-nand";
-               reg = <0>;
-+              spi-tx-bus-width = <4>;
-+              spi-rx-bus-width = <4>;
-+              nand-ecc-engine = <&snfi>;
-+              partitions {
-+                      compatible = "fixed-partitions";
-+                      #address-cells = <1>;
-+                      #size-cells = <1>;
-+
-+                      partition@0 {
-+                              label = "bl2";
-+                              reg = <0x0 0x80000>;
-+                              read-only;
-+                      };
-+
-+                      partition@80000 {
-+                              label = "fip";
-+                              reg = <0x80000 0x200000>;
-+                              read-only;
-+                      };
-+
-+                      ubi: partition@280000 {
-+                              label = "ubi";
-+                              reg = <0x280000 0x7d80000>;
-+                      };
-+              };
-       };
- };
-