--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later or MIT
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/include/ "fsl/p1010si-pre.dtsi"
+
+/ {
+ model = "Watchguard Firebox T10";
+ compatible = "watchguard,firebox-t10";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ bootargs-override = "console=ttyS0,115200";
+ };
+
+ aliases {
+ spi0 = &spi0;
+ led-boot = &led_mode;
+ led-failsafe = &led_failover;
+ led-running = &led_mode;
+ led-upgrade = &led_attention;
+ };
+
+ memory {
+ device_type = "memory";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_attention: attention_orange {
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ label = "orange:attention";
+ };
+
+ status_red {
+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+ label = "red:status";
+ };
+
+ led_mode: mode_green {
+ gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+ label = "green:mode";
+ };
+
+ led_failover: failover_green {
+ gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+ label = "green:failover";
+ };
+ };
+
+ buttons {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset button";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+
+ soc: soc@ffe00000 {
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
+
+ i2c@3000 {
+ rtc@30 {
+ compatible = "sii,s35390a";
+ reg = <0x30>;
+ };
+ };
+
+ spi0: spi@7000 {
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ reg = <0x0 0x90000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ partition@90000 {
+ reg = <0x90000 0x10000>;
+ label = "u-boot-env";
+ };
+
+ partition@a0000 {
+ reg = <0xa0000 0x20000>;
+ label = "cfgxxx";
+ read-only;
+ };
+
+ partition@c0000 {
+ reg = <0xc0000 0x40000>;
+ label = "device_id";
+ read-only;
+ };
+ };
+ };
+ };
+
+ gpio0: gpio-controller@fc00 {
+ };
+
+ usb@22000 {
+ phy_type = "utmi";
+ dr_mode = "host";
+ };
+
+ mdio@24000 {
+ phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ };
+
+ phy2: ethernet-phy@2 {
+ reg = <0x2>;
+ };
+
+ phy3: ethernet-phy@3 {
+ reg = <0x3>;
+ };
+ };
+
+ mdio@25000 {
+ tbi_phy1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@26000 {
+ tbi_phy2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet0: ethernet@b0000 {
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ enet1: ethernet@b1000 {
+ tbi-handle = <&tbi_phy1>;
+ phy-handle = <&phy2>;
+ phy-connection-type = "sgmii";
+ };
+
+ enet2: ethernet@b2000 {
+ tbi-handle = <&tbi_phy2>;
+ phy-handle = <&phy3>;
+ phy-connection-type = "sgmii";
+ };
+
+ sdhc@2e000 {
+ status = "disabled";
+ };
+
+ serial1: serial@4600 {
+ status = "disabled";
+ };
+
+ can0: can@1c000 {
+ status = "disabled";
+ };
+
+ can1: can@1d000 {
+ status = "disabled";
+ };
+ };
+
+ pci0: pcie@ffe09000 {
+ status = "disabled";
+ };
+
+ pci1: pcie@ffe0a000 {
+ status = "disabled";
+ };
+
+ ifc: ifc@ffe1e000 {
+ reg = <0x0 0xffe1e000 0 0x2000>;
+
+ /* NOR, NAND Flashes and CPLD on board */
+ ranges = <0x0 0x0 0x0 0xee000000 0x02000000
+ 0x1 0x0 0x0 0xff800000 0x00010000
+ 0x3 0x0 0x0 0xffb00000 0x00000020>;
+
+ nand@1,0 {
+ compatible = "fsl,ifc-nand";
+ reg = <0x1 0x0 0x10000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /*
+ * Original partition layout:
+ * 0x000000000000-0x000000020000 : "NAND (RW) WG DTB Image"
+ * 0x000000020000-0x000000520000 : "NAND (RW) WG SYSA Kernel"
+ * 0x000000520000-0x000007f00000 : "NAND (RW) WG SYSA_CODE"
+ * 0x000007f00000-0x000008400000 : "NAND (RW) WG SYSB Kernel"
+ * 0x000008400000-0x000009c00000 : "NAND (RW) WG SYSB_CODE"
+ * 0x000009c00000-0x00000a100000 : "NAND (RW) WG SYSA2 Kernel"
+ * 0x00000a100000-0x000011ae0000 : "NAND (RW) WG SYSA_CODE2"
+ * 0x000011ae0000-0x000020000000 : "NAND (RW) WG SYSA_DATA"
+ */
+
+ partition@0 {
+ reg = <0x0 0x20000>;
+ label = "wg-dtb";
+ read-only;
+ };
+
+ partition@20000 {
+ reg = <0x20000 0x500000>;
+ label = "kernel";
+ };
+
+ partition@520000 {
+ reg = <0x520000 0x79e0000>;
+ label = "wg-sysa-rootfs";
+ read-only;
+ };
+
+ partition@7f00000 {
+ reg = <0x7f00000 0x500000>;
+ label = "wg-sysb-kernel";
+ read-only;
+ };
+
+ partition@8400000 {
+ reg = <0x8400000 0x1800000>;
+ label = "wg-sysb-rootfs";
+ read-only;
+ };
+
+ partition@9c00000 {
+ reg = <0x9c00000 0x500000>;
+ label = "wg-sysa2-kernel";
+ read-only;
+ };
+
+ partition@a100000 {
+ reg = <0xa100000 0x79e0000>;
+ label = "wg-sysa2-rootfs";
+ read-only;
+ };
+
+ partition@11ae0000 {
+ reg = <0x11ae0000 0xe520000>;
+ label = "ubi";
+ };
+ };
+ };
+ };
+};
+
+/include/ "fsl/p1010si-post.dtsi"
projects / openwrt / staging / noltari.git / blobdiff