mvebu: move files to files-6.1
[openwrt/openwrt.git] / target / linux / mvebu / files / arch / arm / boot / dts / armada-385-fortinet-fg-30e.dts
diff --git a/target/linux/mvebu/files/arch/arm/boot/dts/armada-385-fortinet-fg-30e.dts b/target/linux/mvebu/files/arch/arm/boot/dts/armada-385-fortinet-fg-30e.dts
deleted file mode 100644 (file)
index c0900d7..0000000
+++ /dev/null
@@ -1,97 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "armada-385-fortinet-fg-x0e.dtsi"
-
-/ {
-       model = "Fortinet FortiGate 30E";
-       compatible = "fortinet,fg-30e", "marvell,armada385", "marvell,armada380";
-
-       memory@0 {
-               device_type = "memory";
-               reg = <0x00000000 0x40000000>; /* 1GB */
-       };
-};
-
-&gpio_leds {
-       led-14 {
-               gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
-               color = <LED_COLOR_ID_AMBER>;
-               linux,default-trigger = "mv88e6xxx-1:00:100Mbps";
-       };
-
-       led-15 {
-               gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
-               color = <LED_COLOR_ID_GREEN>;
-               linux,default-trigger = "mv88e6xxx-1:00:1Gbps";
-       };
-};
-
-&pinctrl {
-       pmx_switch_pins: switch-pins {
-               marvell,pins = "mpp19";
-               marvell,function = "gpio";
-       };
-};
-
-&mdio {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mdio_pins>, <&pmx_switch_pins>;
-
-       /* Marvell 88E6176 */
-       switch@2 {
-               compatible = "marvell,mv88e6085";
-               reg = <0x2>;
-               reset-gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
-
-               ports {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-
-                       port@0 {
-                               reg = <0>;
-                               label = "wan";
-                               nvmem-cells = <&macaddr_bdinfo_d880 1>;
-                               nvmem-cell-names = "mac-address";
-                       };
-
-                       port@1 {
-                               reg = <1>;
-                               label = "lan4";
-                               nvmem-cells = <&macaddr_bdinfo_d880 5>;
-                               nvmem-cell-names = "mac-address";
-                       };
-
-                       port@2 {
-                               reg = <2>;
-                               label = "lan3";
-                               nvmem-cells = <&macaddr_bdinfo_d880 4>;
-                               nvmem-cell-names = "mac-address";
-                       };
-
-                       port@3 {
-                               reg = <3>;
-                               label = "lan2";
-                               nvmem-cells = <&macaddr_bdinfo_d880 3>;
-                               nvmem-cell-names = "mac-address";
-                       };
-
-                       port@4 {
-                               reg = <4>;
-                               label = "lan1";
-                               nvmem-cells = <&macaddr_bdinfo_d880 2>;
-                               nvmem-cell-names = "mac-address";
-                       };
-
-                       port@6 {
-                               reg = <6>;
-                               ethernet = <&eth0>;
-                               phy-connection-type = "rgmii-id";
-
-                               fixed-link {
-                                       speed = <1000>;
-                                       full-duplex;
-                               };
-                       };
-               };
-       };
-};