mvebu: switch to kernel 6.6

[openwrt/openwrt.git] / target / linux / mvebu / files-6.1 / arch / arm64 / boot / dts / marvell / armada-3720-gl-mv1000.dts

diff --git a/target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts b/target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
deleted file mode 100644 (file)
index 07400fc..0000000
--- a/target/linux/mvebu/files-6.1/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
+++ /dev/null
@@ -1,250 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include "armada-372x.dtsi"
-
-/ {
-       model = "GL.iNet GL-MV1000";
-       compatible = "glinet,gl-mv1000", "marvell,armada3720";
-
-       aliases {
-               led-boot = &led_power;
-               led-failsafe = &led_power;
-               led-running = &led_power;
-               led-upgrade = &led_power;
-       };
-
-       chosen {
-               stdout-path = "serial0:115200n8";
-       };
-
-       memory@0 {
-               device_type = "memory";
-               reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
-       };
-
-       vcc_sd_reg1: regulator {
-               compatible = "regulator-gpio";
-               regulator-name = "vcc_sd1";
-               regulator-min-microvolt = <1800000>;
-               regulator-max-microvolt = <3300000>;
-               regulator-boot-on;
-
-               gpios-states = <0>;
-               states = <1800000 0x1
-                       3300000 0x0>;
-               enable-active-high;
-       };
-
-       keys {
-               compatible = "gpio-keys";
-
-               reset {
-                       label = "reset";
-                       linux,code = <KEY_RESTART>;
-                       gpios = <&gpionb 14 GPIO_ACTIVE_LOW>;
-               };
-
-               switch {
-                       label = "switch";
-                       linux,code = <BTN_0>;
-                       gpios = <&gpiosb 22 GPIO_ACTIVE_LOW>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               vpn {
-                       label = "green:vpn";
-                       gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;
-               };
-
-               wan {
-                       function = LED_FUNCTION_WAN;
-                       color = <LED_COLOR_ID_GREEN>;
-                       gpios = <&gpionb 12 GPIO_ACTIVE_LOW>;
-               };
-
-               led_power: power {
-                       function = LED_FUNCTION_POWER;
-                       color = <LED_COLOR_ID_GREEN>;
-                       gpios = <&gpionb 13 GPIO_ACTIVE_LOW>;
-                       default-state = "on";
-               };
-       };
-};
-
-&spi0 {
-       status = "okay";
-
-       flash@0 {
-               reg = <0>;
-               compatible = "jedec,spi-nor";
-               spi-max-frequency = <104000000>;
-               m25p,fast-read;
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "u-boot";
-                               reg = <0 0xf0000>;
-                               read-only;
-                       };
-
-                       partition@f0000 {
-                               label = "u-boot-env";
-                               reg = <0xf0000 0x8000>;
-                               read-only;
-                       };
-
-                       factory: partition@f8000 {
-                               label = "factory";
-                               reg = <0xf8000 0x8000>;
-                               read-only;
-
-                               nvmem-layout {
-                                       compatible = "fixed-layout";
-                                       #address-cells = <1>;
-                                       #size-cells = <1>;
-
-                                       macaddr_factory_0: macaddr@0 {
-                                               reg = <0x0 0x6>;
-                                       };
-
-                                       macaddr_factory_6: macaddr@6 {
-                                               reg = <0x6 0x6>;
-                                       };
-                               };
-                       };
-
-                       partition@100000 {
-                               label = "gl-firmware-dtb";
-                               reg = <0x100000 0x10000>;
-                               read-only;
-                       };
-
-                       partition@110000 {
-                               label = "gl-firmware";
-                               reg = <0x110000 0xef0000>;
-                               read-only;
-                       };
-
-                       partition@ef0000 {
-                               label = "gl-firmware-jffs2";
-                               reg = <0xef0000 0x110000>;
-                               read-only;
-                       };
-               };
-       };
-};
-
-&sdhci1 {
-       wp-inverted;
-       bus-width = <4>;
-       cd-gpios = <&gpionb 17 GPIO_ACTIVE_LOW>;
-       marvell,pad-type = "sd";
-       no-1-8-v;
-       vqmmc-supply = <&vcc_sd_reg1>;
-       status = "okay";
-};
-
-&sdhci0 {
-       bus-width = <8>;
-       mmc-ddr-1_8v;
-       mmc-hs400-1_8v;
-       non-removable;
-       no-sd;
-       no-sdio;
-       marvell,pad-type = "fixed-1-8v";
-       status = "okay";
-};
-
-&usb3 {
-       status = "okay";
-};
-
-&usb2 {
-       status = "okay";
-};
-
-&uart0 {
-       status = "okay";
-};
-
-&mdio {
-       switch0: switch0@1 {
-               compatible = "marvell,mv88e6085";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               reg = <1>;
-
-               dsa,member = <0 0>;
-
-               ports: ports {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-
-                       port@0 {
-                               reg = <0>;
-                               ethernet = <&eth0>;
-                       };
-
-                       port@1 {
-                               reg = <1>;
-                               label = "wan";
-                               phy-handle = <&switch0phy0>;
-                       };
-
-                       port@2 {
-                               reg = <2>;
-                               label = "lan0";
-                               phy-handle = <&switch0phy1>;
-
-                               nvmem-cells = <&macaddr_factory_6>;
-                               nvmem-cell-names = "mac-address";
-                       };
-
-                       port@3 {
-                               reg = <3>;
-                               label = "lan1";
-                               phy-handle = <&switch0phy2>;
-
-                               nvmem-cells = <&macaddr_factory_6>;
-                               nvmem-cell-names = "mac-address";
-                       };
-               };
-
-               mdio {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-
-                       switch0phy0: switch0phy0@11 {
-                               reg = <0x11>;
-                       };
-                       switch0phy1: switch0phy1@12 {
-                               reg = <0x12>;
-                       };
-                       switch0phy2: switch0phy2@13 {
-                               reg = <0x13>;
-                       };
-               };
-       };
-};
-
-&eth0 {
-       nvmem-cells = <&macaddr_factory_0>;
-       nvmem-cell-names = "mac-address";
-       phy-mode = "rgmii-id";
-       status = "okay";
-
-       fixed-link {
-               speed = <1000>;
-               full-duplex;
-       };
-};