+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Device Tree file for Globalscale MOCHAbin
- * Copyright (C) 2019 Globalscale technologies, Inc.
- * Copyright (C) 2021 Sartura Ltd.
- *
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-7040.dtsi"
-
-/ {
- model = "Globalscale MOCHAbin";
- compatible = "globalscale,mochabin", "marvell,armada7040",
- "marvell,armada-ap806-quad", "marvell,armada-ap806";
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- aliases {
- ethernet0 = &cp0_eth0;
- ethernet1 = &cp0_eth1;
- ethernet2 = &cp0_eth2;
- ethernet3 = &swport1;
- ethernet4 = &swport2;
- ethernet5 = &swport3;
- ethernet6 = &swport4;
- };
-
- /* SFP+ 10G */
- sfp_eth0: sfp-eth0 {
- compatible = "sff,sfp";
- i2c-bus = <&cp0_i2c1>;
- los-gpio = <&sfp_gpio 3 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&sfp_gpio 2 GPIO_ACTIVE_LOW>;
- tx-disable-gpio = <&sfp_gpio 1 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&sfp_gpio 0 GPIO_ACTIVE_HIGH>;
- };
-
- /* SFP 1G */
- sfp_eth2: sfp-eth2 {
- compatible = "sff,sfp";
- i2c-bus = <&cp0_i2c0>;
- los-gpio = <&sfp_gpio 7 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&sfp_gpio 6 GPIO_ACTIVE_LOW>;
- tx-disable-gpio = <&sfp_gpio 5 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&sfp_gpio 4 GPIO_ACTIVE_HIGH>;
- };
-};
-
-/* microUSB UART console */
-&uart0 {
- status = "okay";
-
- pinctrl-0 = <&uart0_pins>;
- pinctrl-names = "default";
-};
-
-/* eMMC */
-&ap_sdhci0 {
- status = "okay";
-
- bus-width = <4>;
- non-removable;
- /delete-property/ marvell,xenon-phy-slow-mode;
- no-1-8-v;
-};
-
-&cp0_pinctrl {
- cp0_uart0_pins: cp0-uart0-pins {
- marvell,pins = "mpp6", "mpp7";
- marvell,function = "uart0";
- };
-
- cp0_spi0_pins: cp0-spi0-pins {
- marvell,pins = "mpp56", "mpp57", "mpp58", "mpp59";
- marvell,function = "spi0";
- };
-
- cp0_spi1_pins: cp0-spi1-pins {
- marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
- marvell,function = "spi1";
- };
-
- cp0_i2c0_pins: cp0-i2c0-pins {
- marvell,pins = "mpp37", "mpp38";
- marvell,function = "i2c0";
- };
-
- cp0_i2c1_pins: cp0-i2c1-pins {
- marvell,pins = "mpp2", "mpp3";
- marvell,function = "i2c1";
- };
-
- pca9554_int_pins: pca9554-int-pins {
- marvell,pins = "mpp27";
- marvell,function = "gpio";
- };
-
- cp0_rgmii1_pins: cp0-rgmii1-pins {
- marvell,pins = "mpp44", "mpp45", "mpp46", "mpp47", "mpp48", "mpp49",
- "mpp50", "mpp51", "mpp52", "mpp53", "mpp54", "mpp55";
- marvell,function = "ge1";
- };
-
- is31_sdb_pins: is31-sdb-pins {
- marvell,pins = "mpp30";
- marvell,function = "gpio";
- };
-
- cp0_pcie_reset_pins: cp0-pcie-reset-pins {
- marvell,pins = "mpp9";
- marvell,function = "gpio";
- };
-
- cp0_switch_pins: cp0-switch-pins {
- marvell,pins = "mpp0", "mpp1";
- marvell,function = "gpio";
- };
-
- cp0_phy_pins: cp0-phy-pins {
- marvell,pins = "mpp12";
- marvell,function = "gpio";
- };
-};
-
-/* mikroBUS UART */
-&cp0_uart0 {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_uart0_pins>;
-};
-
-/* mikroBUS SPI */
-&cp0_spi0 {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_spi0_pins>;
-};
-
-/* SPI-NOR */
-&cp0_spi1{
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_spi1_pins>;
-
- spi-flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <20000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x3e0000>;
- read-only;
- };
-
- partition@3e0000 {
- label = "hw-info";
- reg = <0x3e0000 0x10000>;
- read-only;
- };
-
- partition@3f0000 {
- label = "u-boot-env";
- reg = <0x3f0000 0x10000>;
- };
- };
- };
-};
-
-/* mikroBUS, 1G SFP and GPIO expander */
-&cp0_i2c0 {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_i2c0_pins>;
- clock-frequency = <100000>;
-
- sfp_gpio: pca9554@39 {
- compatible = "nxp,pca9554";
- pinctrl-names = "default";
- pinctrl-0 = <&pca9554_int_pins>;
- reg = <0x39>;
-
- interrupt-parent = <&cp0_gpio1>;
- interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
- interrupt-controller;
- #interrupt-cells = <2>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- /*
- * IO0_0: SFP+_TX_FAULT
- * IO0_1: SFP+_TX_DISABLE
- * IO0_2: SFP+_PRSNT
- * IO0_3: SFP+_LOSS
- * IO0_4: SFP_TX_FAULT
- * IO0_5: SFP_TX_DISABLE
- * IO0_6: SFP_PRSNT
- * IO0_7: SFP_LOSS
- */
- };
-};
-
-/* IS31FL3199, mini-PCIe and 10G SFP+ */
-&cp0_i2c1 {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_i2c1_pins>;
- clock-frequency = <100000>;
-
- leds@64 {
- compatible = "issi,is31fl3199";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&is31_sdb_pins>;
- shutdown-gpios = <&cp0_gpio1 30 GPIO_ACTIVE_HIGH>;
- reg = <0x64>;
-
- led1_red: led@1 {
- label = "red:led1";
- reg = <1>;
- led-max-microamp = <20000>;
- };
-
- led1_green: led@2 {
- label = "green:led1";
- reg = <2>;
- };
-
- led1_blue: led@3 {
- label = "blue:led1";
- reg = <3>;
- };
-
- led2_red: led@4 {
- label = "red:led2";
- reg = <4>;
- };
-
- led2_green: led@5 {
- label = "green:led2";
- reg = <5>;
- };
-
- led2_blue: led@6 {
- label = "blue:led2";
- reg = <6>;
- };
-
- led3_red: led@7 {
- label = "red:led3";
- reg = <7>;
- };
-
- led3_green: led@8 {
- label = "green:led3";
- reg = <8>;
- };
-
- led3_blue: led@9 {
- label = "blue:led3";
- reg = <9>;
- };
- };
-};
-
-&cp0_mdio {
- status = "okay";
-
- /* 88E1512 PHY */
- eth2phy: ethernet-phy@1 {
- reg = <1>;
- sfp = <&sfp_eth2>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_phy_pins>;
- reset-gpios = <&cp0_gpio1 12 GPIO_ACTIVE_LOW>;
- };
-
- /* 88E6141 Topaz switch */
- switch: switch@3 {
- compatible = "marvell,mv88e6085";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_switch_pins>;
- reset-gpios = <&cp0_gpio1 0 GPIO_ACTIVE_LOW>;
-
- interrupt-parent = <&cp0_gpio1>;
- interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- swport1: port@1 {
- reg = <1>;
- label = "lan0";
- phy-handle = <&swphy1>;
- };
-
- swport2: port@2 {
- reg = <2>;
- label = "lan1";
- phy-handle = <&swphy2>;
- };
-
- swport3: port@3 {
- reg = <3>;
- label = "lan2";
- phy-handle = <&swphy3>;
- };
-
- swport4: port@4 {
- reg = <4>;
- label = "lan3";
- phy-handle = <&swphy4>;
- };
-
- port@5 {
- reg = <5>;
- ethernet = <&cp0_eth1>;
- phy-mode = "2500base-x";
- managed = "in-band-status";
- };
- };
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- swphy1: swphy1@17 {
- reg = <17>;
- };
-
- swphy2: swphy2@18 {
- reg = <18>;
- };
-
- swphy3: swphy3@19 {
- reg = <19>;
- };
-
- swphy4: swphy4@20 {
- reg = <20>;
- };
- };
- };
-};
-
-&cp0_ethernet {
- status = "okay";
-};
-
-/* 10G SFP+ */
-&cp0_eth0 {
- status = "okay";
-
- phy-mode = "10gbase-r";
- phys = <&cp0_comphy4 0>;
- managed = "in-band-status";
- sfp = <&sfp_eth0>;
-};
-
-/* Topaz switch uplink */
-&cp0_eth1 {
- status = "okay";
-
- phy-mode = "2500base-x";
- phys = <&cp0_comphy0 1>;
-
- fixed-link {
- speed = <2500>;
- full-duplex;
- };
-};
-
-/* 1G SFP or 1G RJ45 */
-&cp0_eth2 {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_rgmii1_pins>;
-
- phy = <ð2phy>;
- phy-mode = "rgmii-id";
-};
-
-/* SMSC USB5434B hub */
-&cp0_usb3_0 {
- status = "okay";
-
- phys = <&cp0_comphy1 0>;
- phy-names = "cp0-usb3h0-comphy";
-};
-
-/* miniPCI-E USB */
-&cp0_usb3_1 {
- status = "okay";
-};
-
-&cp0_sata0 {
- status = "okay";
-
- /* 7 + 12 SATA connector (J24) */
- sata-port@0 {
- phys = <&cp0_comphy2 0>;
- phy-names = "cp0-sata0-0-phy";
- };
-
- /* M.2-2250 B-key (J39) */
- sata-port@1 {
- phys = <&cp0_comphy3 1>;
- phy-names = "cp0-sata0-1-phy";
- };
-};
-
-/* miniPCI-E (J5) */
-&cp0_pcie2 {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_pcie_reset_pins>;
- phys = <&cp0_comphy5 2>;
- phy-names = "cp0-pcie2-x1-phy";
- reset-gpio = <&cp0_gpio1 9 GPIO_ACTIVE_LOW>;
- ranges = <0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x8000000>;
-};
projects / openwrt / staging / pepe2k.git / blobdiff