mvebu: remove obsolete Kernel 5.4

[openwrt/openwrt.git] / target / linux / mvebu / patches-5.4 / 023-arm64-dts-add-uDPU-i2c-bus-recovery.patch

diff --git a/target/linux/mvebu/patches-5.4/023-arm64-dts-add-uDPU-i2c-bus-recovery.patch b/target/linux/mvebu/patches-5.4/023-arm64-dts-add-uDPU-i2c-bus-recovery.patch
deleted file mode 100644 (file)
index 818fce8..0000000
--- a/target/linux/mvebu/patches-5.4/023-arm64-dts-add-uDPU-i2c-bus-recovery.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From 11b2af36cc874027ce701c5784cb957c99c7de3d Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Wed, 6 May 2020 10:40:37 +0100
-Subject: [PATCH] arm64: dts: add uDPU i2c bus recovery
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
----
- .../boot/dts/marvell/armada-3720-uDPU.dts     | 22 +++++++++++++++++--
- 1 file changed, 20 insertions(+), 2 deletions(-)
-
---- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
-@@ -117,18 +117,36 @@
-       };
- };
- 
-+&pinctrl_nb {
-+      i2c1_recovery_pins: i2c1-recovery-pins {
-+              groups = "i2c1";
-+              function = "gpio";
-+      };
-+
-+      i2c2_recovery_pins: i2c2-recovery-pins {
-+              groups = "i2c2";
-+              function = "gpio";
-+      };
-+};
-+
- &i2c0 {
-       status = "okay";
--      pinctrl-names = "default";
-+      pinctrl-names = "default", "recovery";
-       pinctrl-0 = <&i2c1_pins>;
-+      pinctrl-1 = <&i2c1_recovery_pins>;
-       /delete-property/mrvl,i2c-fast-mode;
-+      scl-gpios = <&gpionb 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-+      sda-gpios = <&gpionb 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- };
- 
- &i2c1 {
-       status = "okay";
--      pinctrl-names = "default";
-+      pinctrl-names = "default", "recovery";
-       pinctrl-0 = <&i2c2_pins>;
-+      pinctrl-1 = <&i2c2_recovery_pins>;
-       /delete-property/mrvl,i2c-fast-mode;
-+      scl-gpios = <&gpionb 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-+      sda-gpios = <&gpionb 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- 
-       lm75@48 {
-               status = "okay";