mvebu: switch to kernel 6.6

[openwrt/staging/pepe2k.git] / target / linux / mvebu / patches-6.1 / 320-arm-dts-armada-370-synology-ds213j-mtd-parts.patch

diff --git a/target/linux/mvebu/patches-6.1/320-arm-dts-armada-370-synology-ds213j-mtd-parts.patch b/target/linux/mvebu/patches-6.1/320-arm-dts-armada-370-synology-ds213j-mtd-parts.patch
deleted file mode 100644 (file)
index 280fc59..0000000
--- a/target/linux/mvebu/patches-6.1/320-arm-dts-armada-370-synology-ds213j-mtd-parts.patch
+++ /dev/null
@@ -1,134 +0,0 @@
---- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts
-+++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts
-@@ -31,6 +31,7 @@
- 
-       chosen {
-               stdout-path = "serial0:115200n8";
-+              append-rootblock = "nullparameter="; /* override the bootloader args */
-       };
- 
-       memory@0 {
-@@ -94,6 +95,8 @@
-                              status = "okay";
-                              phy = <&phy1>;
-                              phy-mode = "sgmii";
-+                             nvmem-cells = <&macaddr_vendor_0>;
-+                             nvmem-cell-names = "mac-address";
-                       };
- 
-                       sata@a0000 {
-@@ -175,6 +178,24 @@
-                       gpio = <&gpio1 30 GPIO_ACTIVE_HIGH>;
-               };
-       };
-+
-+      virtual_flash {
-+              compatible = "mtd-concat";
-+
-+              devices = <&mtd_kernel &mtd_gap &mtd_gap2>;
-+
-+              partitions {
-+                      compatible = "fixed-partitions";
-+                      #address-cells = <1>;
-+                      #size-cells = <1>;
-+
-+                      partition@0 {
-+                              compatible = "openwrt,uimage", "denx,uimage";
-+                              label = "firmware";
-+                              reg = <0x0 0x0>;
-+                      };
-+              };
-+      };
- };
- 
- &mdio {
-@@ -265,48 +286,52 @@
-               reg = <0>; /* Chip select 0 */
-               spi-max-frequency = <20000000>;
- 
--              /*
--               * Warning!
--               *
--               * Synology u-boot uses its compiled-in environment
--               * and it seems Synology did not care to change u-boot
--               * default configuration in order to allow saving a
--               * modified environment at a sensible location. So,
--               * if you do a 'saveenv' under u-boot, your modified
--               * environment will be saved at 1MB after the start
--               * of the flash, i.e. in the middle of the uImage.
--               * For that reason, it is strongly advised not to
--               * change the default environment, unless you know
--               * what you are doing.
--               */
--              partition@0 { /* u-boot */
--                      label = "RedBoot";
--                      reg = <0x00000000 0x000c0000>; /* 768KB */
--              };
-+              partitions {
-+                      compatible = "fixed-partitions";
- 
--              partition@c0000 { /* uImage */
--                      label = "zImage";
--                      reg = <0x000c0000 0x002d0000>; /* 2880KB */
--              };
-+                      partition@0 { /* u-boot */
-+                              label = "u-boot";
-+                              reg = <0x00000000 0x000c0000>; /* 768KB */
-+                              read-only;
-+                      };
- 
--              partition@390000 { /* uInitramfs */
--                      label = "rd.gz";
--                      reg = <0x00390000 0x00440000>; /* 4250KB */
--              };
-+                      mtd_gap: partition@c0000 { /* gap */
-+                              label = "gap";
-+                              reg = <0x000c0000 0x00040000>; /* 256KB */
-+                      };
- 
--              partition@7d0000 { /* MAC address and serial number */
--                      label = "vendor";
--                      reg = <0x007d0000 0x00010000>; /* 64KB */
--              };
-+                      partition@100000 { /* u-boot-env */
-+                              label = "u-boot-env";
-+                              reg = <0x00100000 0x00010000>; /* 64KB */
-+                      };
- 
--              partition@7e0000 {
--                      label = "RedBoot config";
--                      reg = <0x007e0000 0x00010000>; /* 64KB */
--              };
-+                      mtd_kernel: partition@110000 {
-+                              label = "kernel";
-+                              reg = <0x00110000 0x006c0000>; /* 6912KB */
-+                      };
- 
--              partition@7f0000 {
--                      label = "FIS directory";
--                      reg = <0x007f0000 0x00010000>; /* 64KB */
-+                      partition@7d0000 { /* MAC address and serial number */
-+                              reg = <0x007d0000 0x00010000>; /* 64KB */
-+                              label = "vendor";
-+                              read-only;
-+
-+                              compatible = "nvmem-cells";
-+
-+                              nvmem-layout {
-+                                      compatible = "fixed-layout";
-+                                      #address-cells = <1>;
-+                                      #size-cells = <1>;
-+
-+                                      macaddr_vendor_0: macaddr@0 {
-+                                              reg = <0x0 0x6>;
-+                                      };
-+                              };
-+                      };
-+
-+                      mtd_gap2: partition@7e0000 {
-+                              label = "gap2";
-+                              reg = <0x007e0000 0x00020000>; /* 128KB */
-+                      };
-               };
-       };
- };