omap: remove 3.12 kernel patches

[openwrt/openwrt.git] / target / linux / omap / patches-3.12 / 301-ARM-dts-AM33XX-Add-AES-data-and-documentation.patch

diff --git a/target/linux/omap/patches-3.12/301-ARM-dts-AM33XX-Add-AES-data-and-documentation.patch b/target/linux/omap/patches-3.12/301-ARM-dts-AM33XX-Add-AES-data-and-documentation.patch
deleted file mode 100644 (file)
index d464d31..0000000
--- a/target/linux/omap/patches-3.12/301-ARM-dts-AM33XX-Add-AES-data-and-documentation.patch
+++ /dev/null
@@ -1,101 +0,0 @@
-Add the generic AM33XX AES module's device tree data and
-enable it for the am335x-evm, am335x-evmsk, and am335x-bone
-platforms.  Also add Documentation file describing the data
-for the AES module.
-
-[joelf@ti.com: Dropped interrupt-parent propert, documentation fixups]
-
-CC: Paul Walmsley <paul@pwsan.com>
-Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
-
----
-.../devicetree/bindings/crypto/omap-aes.txt        | 31 ++++++++++++++++++++++
- arch/arm/boot/dts/am335x-bone.dts                  |  4 +++
- arch/arm/boot/dts/am335x-evm.dts                   |  4 +++
- arch/arm/boot/dts/am335x-evmsk.dts                 |  4 +++
- arch/arm/boot/dts/am33xx.dtsi                      | 10 +++++++
- 5 files changed, 53 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/crypto/omap-aes.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/crypto/omap-aes.txt
-@@ -0,0 +1,31 @@
-+OMAP SoC AES crypto Module
-+
-+Required properties:
-+
-+- compatible : Should contain entries for this and backward compatible
-+  AES versions:
-+  - "ti,omap2-aes" for OMAP2.
-+  - "ti,omap3-aes" for OMAP3.
-+  - "ti,omap4-aes" for OMAP4 and AM33XX.
-+  Note that the OMAP2 and 3 versions are compatible (OMAP3 supports
-+  more algorithms) but they are incompatible with OMAP4.
-+- ti,hwmods: Name of the hwmod associated with the AES module
-+- reg : Offset and length of the register set for the module
-+- interrupts : the interrupt-specifier for the AES module.
-+
-+Optional properties:
-+- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
-+      Documentation/devicetree/bindings/dma/dma.txt
-+- dma-names: DMA request names should include "tx" and "rx" if present.
-+
-+Example:
-+      /* AM335x */
-+      aes: aes@53500000 {
-+              compatible = "ti,omap4-aes";
-+              ti,hwmods = "aes";
-+              reg = <0x53500000 0xa0>;
-+              interrupts = <102>;
-+              dmas = <&edma 6>,
-+                     <&edma 5>;
-+              dma-names = "tx", "rx";
-+      };
---- a/arch/arm/boot/dts/am335x-bone.dts
-+++ b/arch/arm/boot/dts/am335x-bone.dts
-@@ -24,3 +24,7 @@
- &sham {
-       status = "okay";
- };
-+
-+&aes {
-+      status = "okay";
-+};
---- a/arch/arm/boot/dts/am335x-evm.dts
-+++ b/arch/arm/boot/dts/am335x-evm.dts
-@@ -528,3 +528,7 @@
- &sham {
-       status = "okay";
- };
-+
-+&aes {
-+      status = "okay";
-+};
---- a/arch/arm/boot/dts/am335x-evmsk.dts
-+++ b/arch/arm/boot/dts/am335x-evmsk.dts
-@@ -434,3 +434,7 @@
- &sham {
-       status = "okay";
- };
-+
-+&aes {
-+      status = "okay";
-+};
---- a/arch/arm/boot/dts/am33xx.dtsi
-+++ b/arch/arm/boot/dts/am33xx.dtsi
-@@ -716,5 +716,15 @@
-                       dmas = <&edma 36>;
-                       dma-names = "rx";
-               };
-+
-+              aes: aes@53500000 {
-+                      compatible = "ti,omap4-aes";
-+                      ti,hwmods = "aes";
-+                      reg = <0x53500000 0xa0>;
-+                      interrupts = <102>;
-+                      dmas = <&edma 6>,
-+                             <&edma 5>;
-+                      dma-names = "tx", "rx";
-+              };
-       };
- };