+++ /dev/null
-Instead of defining an enumeration with the FW specific values for the
-different clock rates, use the actual frequency instead. Also add a
-boolean to specify whether the clock is XTAL or not.
-
-Change all board files to reflect this.
-
-Additionally, this reverts commit 26f45c (ARM: OMAP2+: Legacy support
-for wl12xx when booted with devicetree), since this is not be needed
-anymore, now that DT support for WiLink is implemented.
-
-Cc: Tony Lindgren <tony@atomide.com>
-Cc: Sekhar Nori <nsekhar@ti.com>
-Signed-off-by: Luciano Coelho <coelho@ti.com>
-Reviewed-by: Felipe Balbi <balbi@ti.com>
-
----
- arch/arm/mach-davinci/board-da850-evm.c | 3 +-
- arch/arm/mach-omap2/board-omap3evm.c | 3 +-
- arch/arm/mach-omap2/board-zoom-peripherals.c | 3 +-
- arch/arm/mach-omap2/devices.c | 39 -------------------
- drivers/net/wireless/ti/wl12xx/main.c | 58 +++++++++++++++++++++++++++-
- drivers/net/wireless/ti/wl12xx/wl12xx.h | 28 ++++++++++++++
- include/linux/wl12xx.h | 27 ++-----------
- 7 files changed, 93 insertions(+), 68 deletions(-)
-
---- a/arch/arm/mach-davinci/board-da850-evm.c
-+++ b/arch/arm/mach-davinci/board-da850-evm.c
-@@ -1370,7 +1370,8 @@ static const short da850_wl12xx_pins[] _
-
- static struct wl12xx_platform_data da850_wl12xx_wlan_data __initdata = {
- .irq = -1,
-- .board_ref_clock = WL12XX_REFCLOCK_38,
-+ .ref_clock_freq = 38400000,
-+ .ref_clock_xtal = false,
- };
-
- static __init int da850_wl12xx_init(void)
---- a/arch/arm/mach-omap2/board-omap3evm.c
-+++ b/arch/arm/mach-omap2/board-omap3evm.c
-@@ -473,7 +473,8 @@ static struct platform_device omap3evm_w
- };
-
- struct wl12xx_platform_data omap3evm_wlan_data __initdata = {
-- .board_ref_clock = WL12XX_REFCLOCK_38, /* 38.4 MHz */
-+ .ref_clock_freq = 38400000,
-+ .ref_clock_xtal = false,
- };
- #endif
-
---- a/arch/arm/mach-omap2/board-zoom-peripherals.c
-+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
-@@ -244,7 +244,8 @@ static struct platform_device *zoom_devi
- };
-
- static struct wl12xx_platform_data omap_zoom_wlan_data __initdata = {
-- .board_ref_clock = WL12XX_REFCLOCK_26, /* 26 MHz */
-+ .ref_clock_freq = 26000000,
-+ .ref_clock_xtal = false,
- };
-
- static struct omap2_hsmmc_info mmc[] = {
---- a/arch/arm/mach-omap2/devices.c
-+++ b/arch/arm/mach-omap2/devices.c
-@@ -8,7 +8,6 @@
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
--#include <linux/gpio.h>
- #include <linux/kernel.h>
- #include <linux/init.h>
- #include <linux/platform_device.h>
-@@ -19,7 +18,6 @@
- #include <linux/of.h>
- #include <linux/pinctrl/machine.h>
- #include <linux/platform_data/omap4-keypad.h>
--#include <linux/wl12xx.h>
- #include <linux/platform_data/mailbox-omap.h>
-
- #include <asm/mach-types.h>
-@@ -475,40 +473,6 @@ static void omap_init_vout(void)
- static inline void omap_init_vout(void) {}
- #endif
-
--#if IS_ENABLED(CONFIG_WL12XX)
--
--static struct wl12xx_platform_data wl12xx __initdata;
--
--void __init omap_init_wl12xx_of(void)
--{
-- int ret;
--
-- if (!of_have_populated_dt())
-- return;
--
-- if (of_machine_is_compatible("ti,omap4-sdp")) {
-- wl12xx.board_ref_clock = WL12XX_REFCLOCK_26;
-- wl12xx.board_tcxo_clock = WL12XX_TCXOCLOCK_26;
-- wl12xx.irq = gpio_to_irq(53);
-- } else if (of_machine_is_compatible("ti,omap4-panda")) {
-- wl12xx.board_ref_clock = WL12XX_REFCLOCK_38;
-- wl12xx.irq = gpio_to_irq(53);
-- } else {
-- return;
-- }
--
-- ret = wl12xx_set_platform_data(&wl12xx);
-- if (ret) {
-- pr_err("error setting wl12xx data: %d\n", ret);
-- return;
-- }
--}
--#else
--static inline void omap_init_wl12xx_of(void)
--{
--}
--#endif
--
- /*-------------------------------------------------------------------------*/
-
- static int __init omap2_init_devices(void)
-@@ -531,9 +495,6 @@ static int __init omap2_init_devices(voi
- omap_init_sham();
- omap_init_aes();
- omap_init_rng();
-- } else {
-- /* These can be removed when bindings are done */
-- omap_init_wl12xx_of();
- }
- omap_init_sti();
- omap_init_vout();
---- a/drivers/net/wireless/ti/wl12xx/main.c
-+++ b/drivers/net/wireless/ti/wl12xx/main.c
-@@ -1701,6 +1701,43 @@ static struct ieee80211_sta_ht_cap wl12x
- },
- };
-
-+static const struct wl12xx_clock wl12xx_refclock_table[] = {
-+ { 19200000, false, WL12XX_REFCLOCK_19 },
-+ { 26000000, false, WL12XX_REFCLOCK_26 },
-+ { 26000000, true, WL12XX_REFCLOCK_26_XTAL },
-+ { 38400000, false, WL12XX_REFCLOCK_38 },
-+ { 38400000, true, WL12XX_REFCLOCK_38_XTAL },
-+ { 52000000, false, WL12XX_REFCLOCK_52 },
-+ { 0, false, 0 }
-+};
-+
-+static const struct wl12xx_clock wl12xx_tcxoclock_table[] = {
-+ { 16368000, true, WL12XX_TCXOCLOCK_16_368 },
-+ { 16800000, true, WL12XX_TCXOCLOCK_16_8 },
-+ { 19200000, true, WL12XX_TCXOCLOCK_19_2 },
-+ { 26000000, true, WL12XX_TCXOCLOCK_26 },
-+ { 32736000, true, WL12XX_TCXOCLOCK_32_736 },
-+ { 33600000, true, WL12XX_TCXOCLOCK_33_6 },
-+ { 38400000, true, WL12XX_TCXOCLOCK_38_4 },
-+ { 52000000, true, WL12XX_TCXOCLOCK_52 },
-+ { 0, false, 0 }
-+};
-+
-+static int wl12xx_get_clock_idx(const struct wl12xx_clock *table,
-+ u32 freq, bool xtal)
-+{
-+ int i = 0;
-+
-+ while(table[i].freq != 0) {
-+ if ((table[i].freq == freq) &&
-+ (table[i].xtal == xtal))
-+ return table[i].hw_idx;
-+ i++;
-+ };
-+
-+ return -EINVAL;
-+}
-+
- static int wl12xx_setup(struct wl1271 *wl)
- {
- struct wl12xx_priv *priv = wl->priv;
-@@ -1722,7 +1759,16 @@ static int wl12xx_setup(struct wl1271 *w
- wl12xx_conf_init(wl);
-
- if (!fref_param) {
-- priv->ref_clock = pdata->board_ref_clock;
-+ priv->ref_clock = wl12xx_get_clock_idx(wl12xx_refclock_table,
-+ pdata->ref_clock_freq,
-+ pdata->ref_clock_xtal);
-+ if (priv->ref_clock < 0) {
-+ wl1271_error("Invalid ref_clock frequency (%d Hz, %s)",
-+ pdata->ref_clock_freq,
-+ pdata->ref_clock_xtal ? "XTAL" : "not XTAL");
-+
-+ return priv->ref_clock;
-+ }
- } else {
- if (!strcmp(fref_param, "19.2"))
- priv->ref_clock = WL12XX_REFCLOCK_19;
-@@ -1741,7 +1787,15 @@ static int wl12xx_setup(struct wl1271 *w
- }
-
- if (!tcxo_param) {
-- priv->tcxo_clock = pdata->board_tcxo_clock;
-+ priv->tcxo_clock = wl12xx_get_clock_idx(wl12xx_tcxoclock_table,
-+ pdata->tcxo_clock_freq,
-+ true);
-+ if (priv->tcxo_clock < 0) {
-+ wl1271_error("Invalid tcxo_clock frequency (%d Hz)",
-+ pdata->tcxo_clock_freq);
-+
-+ return priv->tcxo_clock;
-+ }
- } else {
- if (!strcmp(tcxo_param, "19.2"))
- priv->tcxo_clock = WL12XX_TCXOCLOCK_19_2;
---- a/drivers/net/wireless/ti/wl12xx/wl12xx.h
-+++ b/drivers/net/wireless/ti/wl12xx/wl12xx.h
-@@ -79,4 +79,32 @@ struct wl12xx_priv {
- struct wl127x_rx_mem_pool_addr *rx_mem_addr;
- };
-
-+/* Reference clock values */
-+enum {
-+ WL12XX_REFCLOCK_19 = 0, /* 19.2 MHz */
-+ WL12XX_REFCLOCK_26 = 1, /* 26 MHz */
-+ WL12XX_REFCLOCK_38 = 2, /* 38.4 MHz */
-+ WL12XX_REFCLOCK_52 = 3, /* 52 MHz */
-+ WL12XX_REFCLOCK_38_XTAL = 4, /* 38.4 MHz, XTAL */
-+ WL12XX_REFCLOCK_26_XTAL = 5, /* 26 MHz, XTAL */
-+};
-+
-+/* TCXO clock values */
-+enum {
-+ WL12XX_TCXOCLOCK_19_2 = 0, /* 19.2MHz */
-+ WL12XX_TCXOCLOCK_26 = 1, /* 26 MHz */
-+ WL12XX_TCXOCLOCK_38_4 = 2, /* 38.4MHz */
-+ WL12XX_TCXOCLOCK_52 = 3, /* 52 MHz */
-+ WL12XX_TCXOCLOCK_16_368 = 4, /* 16.368 MHz */
-+ WL12XX_TCXOCLOCK_32_736 = 5, /* 32.736 MHz */
-+ WL12XX_TCXOCLOCK_16_8 = 6, /* 16.8 MHz */
-+ WL12XX_TCXOCLOCK_33_6 = 7, /* 33.6 MHz */
-+};
-+
-+struct wl12xx_clock {
-+ u32 freq;
-+ bool xtal;
-+ u8 hw_idx;
-+};
-+
- #endif /* __WL12XX_PRIV_H__ */
---- a/include/linux/wl12xx.h
-+++ b/include/linux/wl12xx.h
-@@ -26,28 +26,6 @@
-
- #include <linux/err.h>
-
--/* Reference clock values */
--enum {
-- WL12XX_REFCLOCK_19 = 0, /* 19.2 MHz */
-- WL12XX_REFCLOCK_26 = 1, /* 26 MHz */
-- WL12XX_REFCLOCK_38 = 2, /* 38.4 MHz */
-- WL12XX_REFCLOCK_52 = 3, /* 52 MHz */
-- WL12XX_REFCLOCK_38_XTAL = 4, /* 38.4 MHz, XTAL */
-- WL12XX_REFCLOCK_26_XTAL = 5, /* 26 MHz, XTAL */
--};
--
--/* TCXO clock values */
--enum {
-- WL12XX_TCXOCLOCK_19_2 = 0, /* 19.2MHz */
-- WL12XX_TCXOCLOCK_26 = 1, /* 26 MHz */
-- WL12XX_TCXOCLOCK_38_4 = 2, /* 38.4MHz */
-- WL12XX_TCXOCLOCK_52 = 3, /* 52 MHz */
-- WL12XX_TCXOCLOCK_16_368 = 4, /* 16.368 MHz */
-- WL12XX_TCXOCLOCK_32_736 = 5, /* 32.736 MHz */
-- WL12XX_TCXOCLOCK_16_8 = 6, /* 16.8 MHz */
-- WL12XX_TCXOCLOCK_33_6 = 7, /* 33.6 MHz */
--};
--
- struct wl1251_platform_data {
- void (*set_power)(bool enable);
- /* SDIO only: IRQ number if WLAN_IRQ line is used, 0 for SDIO IRQs */
-@@ -57,8 +35,9 @@ struct wl1251_platform_data {
-
- struct wl12xx_platform_data {
- int irq;
-- int board_ref_clock;
-- int board_tcxo_clock;
-+ int ref_clock_freq; /* in Hertz */
-+ bool ref_clock_xtal; /* specify whether the clock is XTAL or not */
-+ int tcxo_clock_freq; /* in Hertz, tcxo is always XTAL */
- };
-
- #ifdef CONFIG_WILINK_PLATFORM_DATA
projects / openwrt / openwrt.git / blobdiff