+++ /dev/null
---- a/arch/arm/mach-omap2/board-n8x0.c
-+++ b/arch/arm/mach-omap2/board-n8x0.c
-@@ -25,6 +25,8 @@
- #include <linux/usb/musb.h>
- #include <sound/tlv320aic3x.h>
- #include <linux/spi/tsc2005.h>
-+#include <linux/input.h>
-+#include <linux/i2c/lm8323.h>
-
- #include <asm/mach/arch.h>
- #include <asm/mach-types.h>
-@@ -37,6 +39,7 @@
- #include <plat/onenand.h>
- #include <plat/mmc.h>
- #include <plat/serial.h>
-+#include <plat/gpio-switch.h>
-
- #include "mux.h"
-
-@@ -104,6 +107,152 @@ extern struct mipid_platform_data n8x0_m
- extern void n8x0_mipid_init(void);
- extern void n8x0_blizzard_init(void);
-
-+/* We map the FN key as LALT to workaround an X keycode problem.
-+ * The XKB map needs to be adjusted to support this. */
-+#define MAP_FN_AS_LEFTALT
-+
-+static s16 rx44_keymap[LM8323_KEYMAP_SIZE] = {
-+ [0x01] = KEY_Q,
-+ [0x02] = KEY_K,
-+ [0x03] = KEY_O,
-+ [0x04] = KEY_P,
-+ [0x05] = KEY_BACKSPACE,
-+ [0x06] = KEY_A,
-+ [0x07] = KEY_S,
-+ [0x08] = KEY_D,
-+ [0x09] = KEY_F,
-+ [0x0a] = KEY_G,
-+ [0x0b] = KEY_H,
-+ [0x0c] = KEY_J,
-+
-+ [0x11] = KEY_W,
-+ [0x12] = KEY_F4,
-+ [0x13] = KEY_L,
-+ [0x14] = KEY_APOSTROPHE,
-+ [0x16] = KEY_Z,
-+ [0x17] = KEY_X,
-+ [0x18] = KEY_C,
-+ [0x19] = KEY_V,
-+ [0x1a] = KEY_B,
-+ [0x1b] = KEY_N,
-+ [0x1c] = KEY_LEFTSHIFT, /* Actually, this is both shift keys */
-+ [0x1f] = KEY_F7,
-+
-+ [0x21] = KEY_E,
-+ [0x22] = KEY_SEMICOLON,
-+ [0x23] = KEY_MINUS,
-+ [0x24] = KEY_EQUAL,
-+#ifdef MAP_FN_AS_LEFTALT
-+ [0x2b] = KEY_LEFTALT,
-+#else
-+ [0x2b] = KEY_FN,
-+#endif
-+ [0x2c] = KEY_M,
-+ [0x2f] = KEY_F8,
-+
-+ [0x31] = KEY_R,
-+ [0x32] = KEY_RIGHTCTRL,
-+ [0x34] = KEY_SPACE,
-+ [0x35] = KEY_COMMA,
-+ [0x37] = KEY_UP,
-+ [0x3c] = KEY_COMPOSE,
-+ [0x3f] = KEY_F6,
-+
-+ [0x41] = KEY_T,
-+ [0x44] = KEY_DOT,
-+ [0x46] = KEY_RIGHT,
-+ [0x4f] = KEY_F5,
-+ [0x51] = KEY_Y,
-+ [0x53] = KEY_DOWN,
-+ [0x55] = KEY_ENTER,
-+ [0x5f] = KEY_ESC,
-+
-+ [0x61] = KEY_U,
-+ [0x64] = KEY_LEFT,
-+
-+ [0x71] = KEY_I,
-+ [0x75] = KEY_KPENTER,
-+};
-+
-+static struct lm8323_platform_data lm8323_pdata = {
-+ .repeat = 0, /* Repeat is handled in userspace for now. */
-+ .keymap = rx44_keymap,
-+ .size_x = 8,
-+ .size_y = 12,
-+ .debounce_time = 12,
-+ .active_time = 500,
-+
-+ .name = "Internal keyboard",
-+ .pwm_names[0] = "n810::keyboard",
-+ .pwm_names[1] = "n810::cover",
-+};
-+
-+#define OMAP_TAG_NOKIA_BT 0x4e01
-+
-+struct omap_bluetooth_config {
-+ u8 chip_type;
-+ u8 bt_wakeup_gpio;
-+ u8 host_wakeup_gpio;
-+ u8 reset_gpio;
-+ u8 bt_uart;
-+ u8 bd_addr[6];
-+ u8 bt_sysclk;
-+};
-+
-+static struct platform_device n8x0_bt_device = {
-+ .name = "hci_h4p",
-+ .id = -1,
-+ .num_resources = 0,
-+};
-+
-+void __init n8x0_bt_init(void)
-+{
-+ const struct omap_bluetooth_config *bt_config;
-+
-+ bt_config = (void *) omap_get_config(OMAP_TAG_NOKIA_BT,
-+ struct omap_bluetooth_config);
-+ n8x0_bt_device.dev.platform_data = (void *) bt_config;
-+ if (platform_device_register(&n8x0_bt_device) < 0)
-+ BUG();
-+}
-+
-+static struct omap_gpio_switch n8x0_gpio_switches[] __initdata = {
-+ {
-+ .name = "headphone",
-+ .gpio = -1,
-+ .debounce_rising = 200,
-+ .debounce_falling = 200,
-+ }, {
-+ .name = "cam_act",
-+ .gpio = -1,
-+ .debounce_rising = 200,
-+ .debounce_falling = 200,
-+ }, {
-+ .name = "cam_turn",
-+ .gpio = -1,
-+ .debounce_rising = 100,
-+ .debounce_falling = 100,
-+ }, {
-+ .name = "slide",
-+ .gpio = -1,
-+ .debounce_rising = 200,
-+ .debounce_falling = 200,
-+ }, {
-+ .name = "kb_lock",
-+ .gpio = -1,
-+ .debounce_rising = 200,
-+ .debounce_falling = 200,
-+ },
-+};
-+
-+static void __init n8x0_gpio_switches_init(void)
-+{
-+ /* The switches are actually registered through ATAG mechanism.
-+ * This just updates the parameters (thus .gpio is -1) */
-+ omap_register_gpio_switches(n8x0_gpio_switches,
-+ ARRAY_SIZE(n8x0_gpio_switches));
-+}
-+
- #define TUSB6010_ASYNC_CS 1
- #define TUSB6010_SYNC_CS 4
- #define TUSB6010_GPIO_INT 58
-@@ -799,6 +948,11 @@ static struct aic3x_pdata n810_aic33_dat
- };
-
- static struct i2c_board_info n810_i2c_board_info_2[] __initdata = {
-+ {
-+ I2C_BOARD_INFO("lm8323", 0x45),
-+ .irq = OMAP_GPIO_IRQ(109),
-+ .platform_data = &lm8323_pdata,
-+ },
- {
- I2C_BOARD_INFO("tlv320aic3x", 0x18),
- .platform_data = &n810_aic33_data,
-@@ -856,7 +1010,9 @@ static inline void board_serial_init(voi
- static void __init n8x0_init_machine(void)
- {
- omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAC);
-+ n8x0_gpio_switches_init();
- n8x0_cbus_init();
-+ n8x0_bt_init();
-
- /* FIXME: add n810 spi devices */
- tsc2005_set_config();
projects / openwrt / svn-archive / archive.git / blobdiff