--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2021, Flole <flole@flole.de>
+ * Copyright (c) 2023, Andrew Smith <gul.code@outlook.com>
+ */
+
+/dts-v1/;
+
+#include "ipq8074.dtsi"
+#include "ipq8074-ess.dtsi"
+#include "ipq8074-hk-cpu.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ aliases {
+ serial0 = &blsp1_uart5;
+ led-boot = &led_front_blue;
+ led-failsafe = &led_front_red;
+ led-running = &led_front_green;
+ led-upgrade = &led_front_white;
+ label-mac-device = &dp2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ bootargs-append = " ubi.mtd=rootfs root=/dev/ubiblock0_0";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_front_blue: front-blue {
+ function = LED_FUNCTION_STATUS;
+ gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+
+ led_front_green: front-green {
+ function = LED_FUNCTION_STATUS;
+ gpios = <&tlmm 29 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led_front_red: front-red {
+ function = LED_FUNCTION_STATUS;
+ gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led_front_white: front-white {
+ function = LED_FUNCTION_STATUS;
+ gpios = <&tlmm 26 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_WHITE>;
+ };
+
+ led_power_green: power-green {
+ function = LED_FUNCTION_POWER;
+ gpios = <&tlmm 21 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_GREEN>;
+ default-state = "on";
+ };
+
+ led_power_red: power-red {
+ function = LED_FUNCTION_POWER;
+ gpios = <&tlmm 22 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_RED>;
+ panic-indicator;
+ };
+ };
+};
+
+&tlmm {
+ mdio_pins: mdio-pins {
+ mdc {
+ pins = "gpio68";
+ function = "mdc";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ mdio {
+ pins = "gpio69";
+ function = "mdio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+ };
+
+ leds_pins: leds_pinmux {
+ led_power_green {
+ pins = "gpio21";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-down;
+ };
+
+ led_power_red {
+ pins = "gpio22";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-down;
+ };
+
+ led_white {
+ pins = "gpio26";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-down;
+ };
+
+ led_green {
+ pins = "gpio29";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-down;
+ };
+
+ led_red {
+ pins = "gpio31";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-down;
+ };
+
+ led_blue {
+ pins = "gpio33";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-down;
+ };
+ };
+};
+
+&blsp1_uart5 {
+ status = "okay";
+};
+
+&blsp1_i2c2 {
+ pinctrl-0 = <&i2c_0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ tlc59208f@27 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "ti,tlc59108";
+ reg = <0x27>;
+
+ led@0 {
+ label = "rgb:led0";
+ reg = <0>;
+ linux,default-trigger = "default-off";
+ };
+
+ led@1 {
+ label = "rgb:led1";
+ reg = <1>;
+ linux,default-trigger = "default-off";
+ };
+
+ led@2 {
+ label = "rgb:led2";
+ reg = <2>;
+ linux,default-trigger = "default-off";
+ };
+
+ led@3 {
+ label = "rgb:led3";
+ reg = <3>;
+ linux,default-trigger = "default-off";
+ };
+ };
+};
+
+&prng {
+ status = "okay";
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+&crypto {
+ status = "okay";
+};
+
+&qpic_bam {
+ status = "okay";
+};
+
+&qpic_nand {
+ status = "okay";
+
+ /*
+ * Bootloader will find the NAND DT node by the compatible and
+ * then "fixup" it by adding the partitions from the SMEM table
+ * using the legacy bindings thus making it impossible for us
+ * to change the partition table or utilize NVMEM for calibration.
+ * So add a dummy partitions node that bootloader will populate
+ * and set it as disabled so the kernel ignores it instead of
+ * printing warnings due to the broken way bootloader adds the
+ * partitions.
+ */
+ partitions {
+ status = "disabled";
+ };
+
+ nand@0 {
+ reg = <0>;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ nand-bus-width = <8>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "0:sbl1";
+ reg = <0x00 0x100000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "0:mibib";
+ reg = <0x100000 0x100000>;
+ read-only;
+ };
+
+ partition@200000 {
+ label = "0:bootconfig";
+ reg = <0x200000 0x80000>;
+ read-only;
+ };
+
+ partition@280000 {
+ label = "0:bootconfig_1";
+ reg = <0x280000 0x80000>;
+ read-only;
+ };
+
+ partition@300000 {
+ label = "0:qsee";
+ reg = <0x300000 0x300000>;
+ read-only;
+ };
+
+ partition@600000 {
+ label = "0:qsee_1";
+ reg = <0x600000 0x300000>;
+ read-only;
+ };
+
+ partition@900000 {
+ label = "0:devcfg";
+ reg = <0x900000 0x80000>;
+ read-only;
+ };
+
+ partition@980000 {
+ label = "0:devcfg_1";
+ reg = <0x980000 0x80000>;
+ read-only;
+ };
+
+ partition@a00000 {
+ label = "0:apdp";
+ reg = <0xa00000 0x80000>;
+ read-only;
+ };
+
+ partition@a80000 {
+ label = "0:apdp_1";
+ reg = <0xa80000 0x80000>;
+ read-only;
+ };
+
+ partition@b00000 {
+ label = "0:rpm";
+ reg = <0xb00000 0x80000>;
+ read-only;
+ };
+
+ partition@b80000 {
+ label = "0:rpm_1";
+ reg = <0xb80000 0x80000>;
+ read-only;
+ };
+
+ partition@c00000 {
+ label = "0:cdt";
+ reg = <0xc00000 0x80000>;
+ read-only;
+ };
+
+ partition@c80000 {
+ label = "0:cdt_1";
+ reg = <0xc80000 0x80000>;
+ read-only;
+ };
+
+ partition@d00000 {
+ label = "0:appsblenv";
+ reg = <0xd00000 0x80000>;
+ };
+
+ partition@d80000 {
+ label = "0:appsbl";
+ reg = <0xd80000 0x100000>;
+ read-only;
+ };
+
+ partition@e80000 {
+ label = "0:appsbl_1";
+ reg = <0xe80000 0x100000>;
+ read-only;
+ };
+
+ partition@f80000 {
+ label = "0:art";
+ reg = <0xf80000 0x80000>;
+ read-only;
+ };
+
+ partition@1000000 {
+ label = "0:art.bak";
+ reg = <0x1000000 0x80000>;
+ read-only;
+ };
+
+ partition@1080000 {
+ label = "config";
+ reg = <0x1080000 0x100000>;
+ };
+
+ partition@1180000 {
+ label = "boarddata1";
+ reg = <0x1180000 0x100000>;
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_boarddata1_0: macaddr@0 {
+ reg = <0x0 0x6>;
+ };
+
+ macaddr_boarddata1_6: macaddr@6 {
+ reg = <0x6 0x6>;
+ };
+ };
+ };
+
+ partition@1280000 {
+ label = "boarddata2";
+ reg = <0x1280000 0x100000>;
+ };
+
+ partition@1380000 {
+ label = "pot";
+ reg = <0x1380000 0x100000>;
+ read-only;
+ };
+
+ partition@1480000 {
+ label = "dnidata";
+ reg = <0x1480000 0x500000>;
+ read-only;
+ };
+
+ partition@1980000 {
+ label = "kernel";
+ reg = <0x1980000 0x620000>;
+ };
+
+ partition@1fa0000 {
+ label = "rootfs";
+ reg = <0x1fa0000 0x66e0000>;
+ };
+
+ partition@8680000 {
+ label = "kernel2";
+ reg = <0x8680000 0x620000>;
+ read-only;
+ };
+
+ partition@8ca0000 {
+ label = "rootfs2";
+ reg = <0x8ca0000 0x66e0000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+ reset-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
+
+ ethernet-phy-package@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ compatible = "qcom,qca8075-package";
+
+ qca8075_1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+
+ qca8075_2: ethernet-phy@2 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <2>;
+ };
+
+ qca8075_3: ethernet-phy@3 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <3>;
+ };
+
+ qca8075_4: ethernet-phy@4 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <4>;
+ };
+ };
+
+ qca8081_28: ethernet-phy@28 {
+ compatible = "ethernet-phy-id004d.d101";
+ reg = <28>;
+ reset-deassert-us = <10000>;
+ reset-gpios = <&tlmm 25 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&switch {
+ status = "okay";
+
+ switch_lan_bmp = <(ESS_PORT2 | ESS_PORT3 | ESS_PORT4 | ESS_PORT5)>; /* lan port bitmap */
+ switch_wan_bmp = <ESS_PORT6>; /* wan port bitmap */
+ switch_mac_mode = <MAC_MODE_PSGMII>; /* mac mode for uniphy instance0*/
+ switch_mac_mode2 = <MAC_MODE_SGMII_PLUS>; /* mac mode for uniphy instance2*/
+
+ qcom,port_phyinfo {
+ port@2 {
+ port_id = <2>;
+ phy_address = <1>;
+ };
+ port@3 {
+ port_id = <3>;
+ phy_address = <2>;
+ };
+ port@4 {
+ port_id = <4>;
+ phy_address = <3>;
+ };
+ port@5 {
+ port_id = <5>;
+ phy_address = <4>;
+ };
+ port@6 {
+ port_id = <6>;
+ phy_address = <28>;
+ port_mac_sel = "QGMAC_PORT";
+ };
+ };
+};
+
+&edma {
+ status = "okay";
+};
+
+&dp2 {
+ status = "okay";
+ phy-handle = <&qca8075_1>;
+ label = "lan2";
+ nvmem-cells = <&macaddr_boarddata1_0>;
+ nvmem-cell-names = "mac-address";
+};
+
+&dp3 {
+ status = "okay";
+ phy-handle = <&qca8075_2>;
+ label = "lan3";
+ nvmem-cells = <&macaddr_boarddata1_0>;
+ nvmem-cell-names = "mac-address";
+};
+
+&dp4 {
+ status = "okay";
+ phy-handle = <&qca8075_3>;
+ label = "lan4";
+ nvmem-cells = <&macaddr_boarddata1_0>;
+ nvmem-cell-names = "mac-address";
+};
+
+&dp5 {
+ status = "okay";
+ phy-handle = <&qca8075_4>;
+ label = "lan5";
+ nvmem-cells = <&macaddr_boarddata1_0>;
+ nvmem-cell-names = "mac-address";
+};
+
+&dp6 {
+ status = "okay";
+ phy-handle = <&qca8081_28>;
+ label = "wan";
+ nvmem-cells = <&macaddr_boarddata1_6>;
+ nvmem-cell-names = "mac-address";
+};
+
+&wifi {
+ status = "okay";
+
+ qcom,ath11k-calibration-variant = "Netgear-SXK80";
+};
projects / openwrt / openwrt.git / blobdiff