ramips/rt305x: Name DTS files based on scheme

[openwrt/staging/mkresin.git] / target / linux / ramips / dts / AIR3GII.dts

diff --git a/target/linux/ramips/dts/AIR3GII.dts b/target/linux/ramips/dts/AIR3GII.dts
deleted file mode 100644 (file)
index 111119e..0000000
--- a/target/linux/ramips/dts/AIR3GII.dts
+++ /dev/null
@@ -1,103 +0,0 @@
-/dts-v1/;
-
-#include "rt5350.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-       compatible = "airlive,air3gii", "ralink,rt5350-soc";
-       model = "AirLive Air3GII";
-
-       leds {
-               compatible = "gpio-leds";
-
-               wlan {
-                       label = "air3gii:green:wlan";
-                       gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
-               };
-
-               mobile {
-                       label = "air3gii:green:mobile";
-                       gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
-                       trigger-sources = <&ohci_port1>, <&ehci_port1>;
-                       linux,default-trigger = "usbport";
-               };
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               poll-interval = <20>;
-
-               wps {
-                       label = "wps";
-                       gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_WPS_BUTTON>;
-               };
-       };
-};
-
-&gpio0 {
-       status = "okay";
-};
-
-&spi0 {
-       status = "okay";
-
-       m25p80@0 {
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <10000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "u-boot";
-                               reg = <0x0 0x30000>;
-                               read-only;
-                       };
-
-                       partition@30000 {
-                               label = "u-boot-env";
-                               reg = <0x30000 0x10000>;
-                               read-only;
-                       };
-
-                       factory: partition@40000 {
-                               label = "factory";
-                               reg = <0x40000 0x10000>;
-                               read-only;
-                       };
-
-                       partition@50000 {
-                               compatible = "denx,uimage";
-                               label = "firmware";
-                               reg = <0x50000 0x3b0000>;
-                       };
-               };
-       };
-};
-
-&pinctrl {
-       state_default: pinctrl0 {
-               gpio {
-                       ralink,group = "i2c", "jtag", "uartf";
-                       ralink,function = "gpio";
-               };
-       };
-};
-
-&ethernet {
-       mtd-mac-address = <&factory 0x4>;
-};
-
-&esw {
-       mediatek,portmap = <0x2f>;
-};
-
-&wmac {
-       ralink,mtd-eeprom = <&factory 0>;
-};