model = "Edimax BR-6475nD";
aliases {
- led-status = &led_power;
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <100>;
reset {
compatible = "cfi-flash";
reg = <0x1c000000 0x800000>;
bank-width = <2>;
- #address-cells = <1>;
- #size-cells = <1>;
- partition@0 {
- reg = <0x00000000 0x00030000>;
- label = "u-boot";
- read-only;
- };
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
- partition@30000 {
- reg = <0x00030000 0x00010000>;
- label = "nvram";
- read-only;
- };
+ partition@0 {
+ reg = <0x00000000 0x00030000>;
+ label = "u-boot";
+ read-only;
+ };
- factory: partition@40000 {
- reg = <0x00040000 0x00010000>;
- label = "factory";
- read-only;
- };
+ partition@30000 {
+ reg = <0x00030000 0x00010000>;
+ label = "nvram";
+ read-only;
+ };
- devdata: partition@50000 {
- reg = <0x00050000 0x00020000>;
- label = "devdata";
- read-only;
- };
+ factory: partition@40000 {
+ reg = <0x00040000 0x00010000>;
+ label = "factory";
+ read-only;
+ };
+
+ devdata: partition@50000 {
+ reg = <0x00050000 0x00020000>;
+ label = "devdata";
+ read-only;
+ };
- partition@70000 {
- reg = <0x00070000 0x00790000>;
- label = "firmware";
+ partition@70000 {
+ compatible = "denx,uimage";
+ reg = <0x00070000 0x00790000>;
+ label = "firmware";
+ };
};
};
realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
};
- /* Unclear if this is the correct gpio setup; the USB ports are
- unpopulated on a stock BR-6475nD, even though the hardware exists
- and the headers are there. */
+ /*
+ * Unclear if this is the correct gpio setup; the USB ports are
+ * unpopulated on a stock BR-6475nD, even though the hardware exists
+ * and the headers are there.
+ */
/*
gpio_export {
compatible = "gpio-export";
&pci {
status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pci_pins>;
-
- pci_pins: pci {
- pci {
- ralink,group = "pci";
- ralink,function = "pci-fnc";
- };
- };
+};
- host-bridge {
- pci-bridge@1 {
- status = "okay";
+&pci1 {
+ status = "okay";
- wifi@0,0 {
- compatible = "pci0,0";
- reg = <0x10000 0 0 0 0>;
- ralink,5ghz = <0>;
- ralink,mtd-eeprom = <&factory 0x8000>;
- };
- };
+ wifi@0,0 {
+ compatible = "pci0,0";
+ reg = <0x10000 0 0 0 0>;
+ ralink,5ghz = <0>;
+ ralink,mtd-eeprom = <&factory 0x8000>;
};
};