ramips: use pinmux nodes from dtsi

[openwrt/openwrt.git] / target / linux / ramips / dts / DIR-300-B7.dts

diff --git a/target/linux/ramips/dts/DIR-300-B7.dts b/target/linux/ramips/dts/DIR-300-B7.dts
index 22c4cb2c6b8ecb0d47987c7d5f177c80d4f67653..12ccd1620d51cf0ee3ca789ce86dfe356ee01648 100644 (file)
--- a/target/linux/ramips/dts/DIR-300-B7.dts
+++ b/target/linux/ramips/dts/DIR-300-B7.dts
@@ -1,96 +1,103 @@
 /dts-v1/;
 
-/include/ "rt5350.dtsi"
+#include "rt5350.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
-       compatible = "DIR-300-B7", "ralink,rt5350-soc";
+       compatible = "dlink,dir-300-b7", "ralink,rt5350-soc";
        model = "D-Link DIR-300 B7";
 
-       palmbus@10000000 {
-               spi@b00 {
-                       status = "okay";
-                       m25p80@0 {
-                               #address-cells = <1>;
-                               #size-cells = <1>;
-                               compatible = "s25fl064k";
-                               reg = <0 0>;
-                               linux,modalias = "m25p80", "s25fl064k";
-                               spi-max-frequency = <10000000>;
-
-                               partition@0 {
-                                       label = "u-boot";
-                                       reg = <0x0 0x30000>;
-                                       read-only;
-                               };
-
-                               partition@30000 {
-                                       label = "u-boot-env";
-                                       reg = <0x30000 0x10000>;
-                                       read-only;
-                               };
-
-                               factory: partition@40000 {
-                                       label = "factory";
-                                       reg = <0x40000 0x10000>;
-                                       read-only;
-                               };
-
-                               partition@50000 {
-                                       label = "firmware";
-                                       reg = <0x50000 0x7b0000>;
-                               };
-                       };
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               status {
+                       label = "dir-300-b7:green:status";
+                       gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+               };
+
+               wps {
+                       label = "dir-300-b7:blue:wps";
+                       gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
                };
        };
 
-       pinctrl {
-               state_default: pinctrl0 {
-                       gpio {
-                               ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
-                               ralink,function = "gpio";
-                       };
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+
+               wps {
+                       label = "wps";
+                       gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
                };
        };
+};
+
+&spi0 {
+       status = "okay";
+
+       m25p80@0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <10000000>;
+
+               partition@0 {
+                       label = "u-boot";
+                       reg = <0x0 0x30000>;
+                       read-only;
+               };
+
+               partition@30000 {
+                       label = "u-boot-env";
+                       reg = <0x30000 0x10000>;
+                       read-only;
+               };
 
-        esw@10110000 {
-                ralink,portmap = <0x2f>;
-                ralink,led_polarity = <0x17>;
-        };
-
-        gpio-leds {
-                compatible = "gpio-leds";
-                status {
-                        label = "d-link:green:status";
-                        gpios = <&gpio0 9 1>;
-                };
-                wps {
-                        label = "d-link:blue:wps";
-                        gpios = <&gpio0 13 1>;
-                };
-        };
-
-        gpio-keys-polled {
-                gpio-keys-polled {
-                compatible = "gpio-keys-polled";
-                #address-cells = <1>;
-                #size-cells = <0>;
-                poll-interval = <20>;
-                        reset {
-                                label = "reset";
-                                gpios = <&gpio0 10 1>;
-                                linux,code = <0x198>;
-                        };
-                        wps {
-                                label = "wps";
-                                gpios = <&gpio0 0 1>;
-                                linux,code = <0x211>;
-                        };
-                };
-        };
-
-        wmac@10180000 {
-                status = "okay";
-               ralink,led-polarity = <1>;
-        };
+               factory: partition@40000 {
+                       label = "factory";
+                       reg = <0x40000 0x10000>;
+                       read-only;
+               };
+
+               partition@50000 {
+                       label = "firmware";
+                       reg = <0x50000 0x7b0000>;
+               };
+       };
 };
 
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+                       ralink,function = "gpio";
+               };
+       };
+};
+
+&ethernet {
+       mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+       mediatek,portmap = <0x2f>;
+       mediatek,led_polarity = <0x17>;
+};
+
+&wmac {
+       status = "okay";
+       ralink,led-polarity = <1>;
+       ralink,mtd-eeprom = <&factory 0>;
+};