#include "mt7620a.dtsi"
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "dlink,dir-810l", "ralink,mt7620a-soc";
model = "D-Link DIR-810L";
+ aliases {
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_green;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_green;
+ };
+
gpio-keys-polled {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
- gpios = <&gpio0 1 1>;
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
wps {
label = "wps";
- gpios = <&gpio0 2 1>;
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
};
gpio-leds {
compatible = "gpio-leds";
- power {
+ led_power_green: power {
label = "dir-810l:green:power";
- gpios = <&gpio0 9 0>;
+ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
};
wan {
label = "dir-810l:orange:wan";
- gpios = <&gpio0 12 0>;
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
};
- status {
+ power2 {
label = "dir-810l:orange:power";
- gpios = <&gpio0 13 0>;
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
};
};
};
status = "okay";
m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
- linux,modalias = "m25p80";
spi-max-frequency = <10000000>;
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- factory5g: partition@50000 {
- label = "factory5g";
- reg = <0x50000 0x10000>;
- read-only;
- };
-
- partition@60000 {
- label = "Wolf_Config";
- reg = <0x60000 0x10000>;
- read-only;
- };
-
- partition@70000 {
- label = "MyDlink";
- reg = <0x70000 0x80000>;
- read-only;
- };
-
- partition@e0000 {
- label = "Jffs2";
- reg = <0xe0000 0x80000>;
- read-only;
- };
-
- partition@170000 {
- label = "firmware";
- reg = <0x170000 0x690000>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ factory5g: partition@50000 {
+ label = "factory5g";
+ reg = <0x50000 0x10000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "Wolf_Config";
+ reg = <0x60000 0x10000>;
+ read-only;
+ };
+
+ partition@70000 {
+ label = "MyDlink";
+ reg = <0x70000 0x80000>;
+ read-only;
+ };
+
+ partition@e0000 {
+ label = "Jffs2";
+ reg = <0xe0000 0x80000>;
+ read-only;
+ };
+
+ partition@170000 {
+ label = "firmware";
+ reg = <0x170000 0x690000>;
+ };
};
};
};