ramips/mt7620: Name DTS files based on scheme

[openwrt/openwrt.git] / target / linux / ramips / dts / E1700.dts

diff --git a/target/linux/ramips/dts/E1700.dts b/target/linux/ramips/dts/E1700.dts
deleted file mode 100644 (file)
index 2ea7400..0000000
--- a/target/linux/ramips/dts/E1700.dts
+++ /dev/null
@@ -1,163 +0,0 @@
-/*
- * Device Tree file for the Linksys E1700
- *
- * Copyright (C) 2014 Imre Kaloz <kaloz@openwrt.org>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-       compatible = "linksys,e1700", "ralink,mt7620a-soc";
-       model = "Linksys E1700";
-
-       aliases {
-               led-boot = &led_power;
-               led-failsafe = &led_power;
-               led-running = &led_power;
-               led-upgrade = &led_power;
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               poll-interval = <20>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
-                       linux,code = <KEY_RESTART>;
-               };
-
-               wps {
-                       label = "wps";
-                       gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
-                       linux,code = <KEY_WPS_BUTTON>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               led_power: power {
-                       label = "e1700:green:power";
-                       gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
-               };
-
-               wan {
-                       label = "e1700:green:wps";
-                       gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
-               };
-       };
-};
-
-&spi0 {
-       status = "okay";
-
-       m25p80@0 {
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <10000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "u-boot";
-                               reg = <0x0 0x30000>;
-                               read-only;
-                       };
-
-                       partition@30000 {
-                               label = "config";
-                               reg = <0x30000 0x10000>;
-                               read-only;
-                       };
-
-                       factory: partition@40000 {
-                               label = "factory";
-                               reg = <0x40000 0x10000>;
-                               read-only;
-                       };
-
-                       partition@50000 {
-                               compatible = "denx,uimage";
-                               label = "firmware";
-                               reg = <0x50000 0x7b0000>;
-                       };
-               };
-       };
-};
-
-&pinctrl {
-       state_default: pinctrl0 {
-               gpio {
-                       ralink,group = "i2c", "uartf";
-                       ralink,function = "gpio";
-               };
-       };
-};
-
-&ethernet {
-       status = "okay";
-       mtd-mac-address = <&factory 0x28>;
-       pinctrl-names = "default";
-       pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
-
-       port@5 {
-               status = "okay";
-               mediatek,fixed-link = <1000 1 1 1>;
-               phy-mode = "rgmii";
-       };
-
-       mdio-bus {
-               status = "okay";
-
-               phy0: ethernet-phy@0 {
-                       reg = <0>;
-                       phy-mode = "rgmii";
-               };
-
-               phy1: ethernet-phy@1 {
-                       reg = <1>;
-                       phy-mode = "rgmii";
-               };
-
-               phy2: ethernet-phy@2 {
-                       reg = <2>;
-                       phy-mode = "rgmii";
-               };
-
-               phy3: ethernet-phy@3 {
-                       reg = <3>;
-                       phy-mode = "rgmii";
-               };
-
-               phy4: ethernet-phy@4 {
-                       reg = <4>;
-                       phy-mode = "rgmii";
-               };
-
-               phy1f: ethernet-phy@1f {
-                       reg = <0x1f>;
-                       phy-mode = "rgmii";
-               };
-       };
-};
-
-&gsw {
-       mediatek,port4 = "gmac";
-};
-
-&wmac {
-       ralink,mtd-eeprom = <&factory 0>;
-};